Click or drag to resize

ServiceAreaFacility Class

A class that describes service area facility.
Inheritance Hierarchy
SystemObject
  Esri.ArcGISRuntime.Tasks.NetworkAnalysisServiceAreaFacility

Namespace:  Esri.ArcGISRuntime.Tasks.NetworkAnalysis
Assembly:  Esri.ArcGISRuntime (in Esri.ArcGISRuntime.dll) Version: 100.9.0.0
Syntax
C#
public sealed class ServiceAreaFacility

The ServiceAreaFacility type exposes the following members.

Constructors
  NameDescription
Public methodCode exampleServiceAreaFacility
Initializes a new instance of the ServiceAreaFacility class.
Top
Properties
  NameDescription
Public propertyCurbApproach
Gets or sets the curb approach.
Public propertyCurrentBearing
Gets or sets the current bearing in degrees.
Public propertyCurrentBearingTolerance
Gets or sets the current bearing tolerance in degrees. Valid values are 0 to 180 or NaN.
Public propertyDistanceToNetworkLocation
Gets distance to network location in meters.
Public propertyFacilityId
Gets or sets the facility ID.
Public propertyGeometry
Gets service area facility's location using geographical point.
Public propertyImpedanceCutoffs
Gets the impedance cutoffs value.
Public propertyLocationStatus
Gets location status.
Public propertyName
Gets service area facility's name.
Public propertyNavigationLatency
Gets or sets the navigation latency.
Public propertyNavigationSpeed
Gets or sets the navigation speed in meters per second.
Public propertyNetworkLocation
Gets network location.
Top
Methods
  NameDescription
Public methodGetAddedCost
Gets added cost value for given impedance or accumulate attribute.
Public methodSetAddedCost
Sets added cost value for given impedance or accumulate attribute.
Top
Remarks
Facilities represent locations from which service areas need to be calculated. For example, a fire station can be set as a facility to find which areas it can serve within a 10 minute service area. A hospital can be set as the facility to find what proportion of the population is within a 2 mile driving distance.
Examples

Android

Example Name: FindServiceArea

Find the service area within a network from a given point.

Code example screen shot.

C#
// Copyright 2018 Esri.
// 
// Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.
// You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0
// 
// Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific
// language governing permissions and limitations under the License.

using Android.App;
using Android.OS;
using Android.Views;
using Android.Widget;
using Esri.ArcGISRuntime.Geometry;
using Esri.ArcGISRuntime.Mapping;
using Esri.ArcGISRuntime.Symbology;
using Esri.ArcGISRuntime.Tasks.NetworkAnalysis;
using Esri.ArcGISRuntime.UI;
using Esri.ArcGISRuntime.UI.Controls;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Threading.Tasks;

namespace ArcGISRuntime.Samples.FindServiceArea
{
    [Activity (ConfigurationChanges=Android.Content.PM.ConfigChanges.Orientation | Android.Content.PM.ConfigChanges.ScreenSize)]
    [ArcGISRuntime.Samples.Shared.Attributes.Sample(
        name: "Find service area",
        category: "Network analysis",
        description: "Find the service area within a network from a given point.",
        instructions: "In order to find any service areas at least one facility needs to be added to the map view.",
        tags: new[] { "Routing and Logistics", "barriers", "facilities", "impedance" })]
    public class FindServiceArea : Activity
    {
        // Hold a reference to the map view.
        private MapView _myMapView;

        // Uri for the service area around San Diego.
        private Uri _serviceAreaUri = new Uri("https://sampleserver6.arcgisonline.com/arcgis/rest/services/NetworkAnalysis/SanDiego/NAServer/ServiceArea");

        // Create buttons for the UI.
        private Button _facilityButton;
        private Button _barrierButton;
        private Button _serviceAreasButton;
        private Button _resetButton;

        protected override void OnCreate(Bundle bundle)
        {
            base.OnCreate(bundle);

            Title = "Find service area (interactive)";

            CreateLayout();
            Initialize();
        }

        private void CreateLayout()
        {
            // Create a new layout for the entire page.
            LinearLayout layout = new LinearLayout(this) { Orientation = Orientation.Vertical };

            // Add layouts for the buttons.
            LinearLayout topRow = new LinearLayout(this) { Orientation = Orientation.Horizontal };
            LinearLayout bottomRow = new LinearLayout(this) { Orientation = Orientation.Horizontal };

            // Make a layout parameter for the buttons.
            LinearLayout.LayoutParams param = new LinearLayout.LayoutParams(
                ViewGroup.LayoutParams.MatchParent,
                ViewGroup.LayoutParams.MatchParent,
                1.0f
            );

            // Create a button to reset the route display, add it to the toolbar.
            _facilityButton = new Button(this) { Text = "Place Facility", LayoutParameters = param };
            _facilityButton.Click += PlaceFacilityButtonClick;
            topRow.AddView(_facilityButton);

            // Create a button to reset the route display, add it to the toolbar.
            _barrierButton = new Button(this) { Text = "Draw Barrier", LayoutParameters = param };
            //_barrierButton.SetWidth(toolbar.Width);
            _barrierButton.Click += DrawBarrierButtonClick;
            topRow.AddView(_barrierButton);

            // Create a button to reset the route display, add it to the toolbar.
            _serviceAreasButton = new Button(this) { Text = "Show Service Areas", LayoutParameters = param };
            _serviceAreasButton.Click += ShowServiceAreasButtonClick;
            bottomRow.AddView(_serviceAreasButton);

            // Create a button to reset the route display, add it to the toolbar.
            _resetButton = new Button(this) { Text = "Reset", LayoutParameters = param };
            _resetButton.Click += ResetClick;
            bottomRow.AddView(_resetButton);

            // Add rows of buttons to the layout.
            layout.AddView(topRow);
            layout.AddView(bottomRow);

            // Add the map view to the layout.
            _myMapView = new MapView(this);
            layout.AddView(_myMapView);

            // Show the layout in the app.
            SetContentView(layout);
        }

        private void Initialize()
        {
            // Center the map on San Diego.
            Map streetsMap = new Map(Basemap.CreateLightGrayCanvasVector())
            {
                InitialViewpoint = new Viewpoint(32.73, -117.14, 30000)
            };
            _myMapView.Map = streetsMap;

            // Create graphics overlays for all of the elements of the map.
            _myMapView.GraphicsOverlays.Add(new GraphicsOverlay());

            // Add a new behavior for double taps on the MapView.
            _myMapView.GeoViewDoubleTapped += (s, e) =>
            {
                // If the sketch editor complete command is enabled, a sketch is in progress.
                if (_myMapView.SketchEditor.CompleteCommand.CanExecute(null))
                {
                    // Set the event as handled.
                    e.Handled = true;

                    // Finish any drawing.
                    _myMapView.SketchEditor.CompleteCommand.Execute(null);

                    // Update UI.
                    _barrierButton.Text = "Draw barrier";
                }
            };
        }

        private async void PlaceFacilityButtonClick(object sender, EventArgs e)
        {
            // Disable the button so the user recognizes that they are placing a facility.
            _facilityButton.Enabled = false;

            try
            {
                // Let the user tap on the map view using the point sketch mode.
                SketchCreationMode creationMode = SketchCreationMode.Point;
                Geometry geometry = await _myMapView.SketchEditor.StartAsync(creationMode, false);

                // Symbology for a facility.
                PictureMarkerSymbol facilitySymbol = new PictureMarkerSymbol(new Uri("https://static.arcgis.com/images/Symbols/SafetyHealth/Hospital.png"))
                {
                    Height = 30,
                    Width = 30
                };

                // Create a graphic for the facility.
                Graphic facilityGraphic = new Graphic(geometry, new Dictionary<string, object>() { { "Type", "Facility" } }, facilitySymbol)
                {
                    ZIndex = 2
                };

                // Add the graphic to the graphics overlay.
                _myMapView.GraphicsOverlays[0].Graphics.Add(facilityGraphic);
            }
            catch (TaskCanceledException)
            {
                // Ignore this exception.
            }
            catch (Exception ex)
            {
                // Report exceptions.
                CreateErrorDialog("Error drawing facility:\n" + ex.Message);
            }

            // Enable the button when the user is done.
            _facilityButton.Enabled = true;
        }

        private async void DrawBarrierButtonClick(object sender, EventArgs e)
        {
            // Finish any drawings in progress.
            if (_barrierButton.Text != "Draw barrier")
            {
                // Finish the sketch.
                if (_myMapView.SketchEditor.CompleteCommand.CanExecute(null))
                {
                    _myMapView.SketchEditor.CompleteCommand.Execute(null);
                }

                // Update the UI.
                _barrierButton.Text = "Draw barrier";

                return;
            }

            try
            {
                // Update the UI.
                _barrierButton.Text = "Finish drawing";

                // Let the user draw on the map view using the polyline sketch mode.
                SketchCreationMode creationMode = SketchCreationMode.Polyline;
                Geometry geometry = await _myMapView.SketchEditor.StartAsync(creationMode, false);

                // Symbol for the barriers.
                SimpleLineSymbol barrierSymbol = new SimpleLineSymbol(SimpleLineSymbolStyle.Solid, System.Drawing.Color.Black, 5.0f);

                // Create the graphic to be used for barriers.
                Graphic barrierGraphic = new Graphic(geometry, new Dictionary<string, object>() { { "Type", "Barrier" } }, barrierSymbol)
                {
                    ZIndex = 1
                };

                // Add a graphic from the polyline the user drew.
                _myMapView.GraphicsOverlays[0].Graphics.Add(barrierGraphic);
            }
            catch (TaskCanceledException)
            {
                // Ignore this exception.
            }
            catch (Exception ex)
            {
                // Report exceptions.
                CreateErrorDialog("Error drawing barrier:\n" + ex.Message);
            }

            // Enable the button when the user is done.
            _barrierButton.Enabled = true;
        }

        private async void ShowServiceAreasButtonClick(object sender, EventArgs e)
        {
            // Finish any drawings in progress.
            if (_myMapView.SketchEditor.CompleteCommand.CanExecute(null))
            {
                _myMapView.SketchEditor.CompleteCommand.Execute(null);
            }

            // Update the UI.
            _barrierButton.Text = "Draw barrier";

            // Use a local variable for the graphics overlay.
            GraphicCollection allGraphics = _myMapView.GraphicsOverlays[0].Graphics;

            // Get a list of the facilities from the graphics overlay.
            List<ServiceAreaFacility> serviceAreaFacilities = (from g in allGraphics
                                                               where (string)g.Attributes["Type"] == "Facility"
                                                               select new ServiceAreaFacility((MapPoint)g.Geometry)).ToList();

            // Check that there is at least 1 facility to find a service area for.
            if (!serviceAreaFacilities.Any())
            {
                CreateErrorDialog("Must have at least one Facility!");
                return;
            }

            // Create the service area task and parameters based on the Uri.
            ServiceAreaTask serviceAreaTask = await ServiceAreaTask.CreateAsync(_serviceAreaUri);

            // Store the default parameters for the service area in an object.
            ServiceAreaParameters serviceAreaParameters = await serviceAreaTask.CreateDefaultParametersAsync();

            // Add impedance cutoffs for facilities (drive time minutes).
            serviceAreaParameters.DefaultImpedanceCutoffs.Add(2.0);
            serviceAreaParameters.DefaultImpedanceCutoffs.Add(5.0);

            // Set the level of detail for the polygons.
            serviceAreaParameters.PolygonDetail = ServiceAreaPolygonDetail.High;

            // Get a list of the barriers from the graphics overlay.
            List<PolylineBarrier> polylineBarriers = (from g in allGraphics
                                                      where (string)g.Attributes["Type"] == "Barrier"
                                                      select new PolylineBarrier((Polyline)g.Geometry)).ToList();

            // Add the barriers to the service area parameters.
            serviceAreaParameters.SetPolylineBarriers(polylineBarriers);

            // Update the parameters to include all of the placed facilities.
            serviceAreaParameters.SetFacilities(serviceAreaFacilities);

            // Clear existing graphics for service areas.
            foreach (Graphic g in allGraphics.ToList())
            {
                // Check if the graphic g is a service area.
                if ((string)g.Attributes["Type"] == "ServiceArea")
                {
                    allGraphics.Remove(g);
                }
            }

            try
            {
                // Solve for the service area of the facilities.
                ServiceAreaResult result = await serviceAreaTask.SolveServiceAreaAsync(serviceAreaParameters);

                // Loop over each facility.
                for (int i = 0; i < serviceAreaFacilities.Count; i++)
                {
                    // Create list of polygons from a service facility.
                    List<ServiceAreaPolygon> polygons = result.GetResultPolygons(i).ToList();

                    // Symbol for the outline of the service areas.
                    SimpleLineSymbol serviceOutline = new SimpleLineSymbol(SimpleLineSymbolStyle.Solid, System.Drawing.Color.DarkGray, 3.0f);

                    // Create a list of fill symbols for the polygons.
                    List<SimpleFillSymbol> fillSymbols = new List<SimpleFillSymbol>();
                    fillSymbols.Add(new SimpleFillSymbol(SimpleFillSymbolStyle.Solid, System.Drawing.Color.FromArgb(70, 255, 0, 0), serviceOutline));
                    fillSymbols.Add(new SimpleFillSymbol(SimpleFillSymbolStyle.Solid, System.Drawing.Color.FromArgb(70, 255, 165, 0), serviceOutline));

                    // Loop over every polygon in every facilities result.
                    for (int j = 0; j < polygons.Count; j++)
                    {
                        // Create the graphic for the service areas, alternating between fill symbols.
                        Graphic serviceGraphic = new Graphic(polygons[j].Geometry, new Dictionary<string, object>() { { "Type", "ServiceArea" } }, fillSymbols[j % 2])
                        {
                            ZIndex = 0
                        };

                        // Add graphic for service area. Alternate the color of each polygon.
                        allGraphics.Add(serviceGraphic);
                    }
                }
            }
            catch (Esri.ArcGISRuntime.Http.ArcGISWebException exception)
            {
                if (exception.Message.ToString().Equals("Unable to complete operation."))
                {
                    CreateErrorDialog("Facility not within San Diego area!");
                }
                else
                {
                    CreateErrorDialog("An ArcGIS web exception occurred. \n" + exception.Message);
                }
            }
        }

        private void ResetClick(object sender, EventArgs e)
        {
            // Clear all of the graphics.
            _myMapView.GraphicsOverlays[0].Graphics.Clear();
        }

        private void CreateErrorDialog(string message)
        {
            // Create a dialog to show message to user.
            AlertDialog alert = new AlertDialog.Builder(this).Create();
            alert.SetMessage(message);
            alert.Show();
        }
    }
}
Examples

Xamarin Forms Android

Example Name: FindServiceArea

Find the service area within a network from a given point.

Code example screen shot.

C#
// Copyright 2018 Esri.
// 
// Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.
// You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0
// 
// Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific
// language governing permissions and limitations under the License.

using Esri.ArcGISRuntime.Geometry;
using Esri.ArcGISRuntime.Mapping;
using Esri.ArcGISRuntime.Symbology;
using Esri.ArcGISRuntime.Tasks.NetworkAnalysis;
using Esri.ArcGISRuntime.UI;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Threading.Tasks;
using Xamarin.Forms;

namespace ArcGISRuntime.Samples.FindServiceArea
{
    [ArcGISRuntime.Samples.Shared.Attributes.Sample(
        name: "Find service area",
        category: "Network analysis",
        description: "Find the service area within a network from a given point.",
        instructions: "In order to find any service areas at least one facility needs to be added to the map view.",
        tags: new[] { "Routing and Logistics", "barriers", "facilities", "impedance" })]
    public partial class FindServiceArea
    {
        // Uri for the service area around San Diego.
        private Uri _serviceAreaUri = new Uri("https://sampleserver6.arcgisonline.com/arcgis/rest/services/NetworkAnalysis/SanDiego/NAServer/ServiceArea");

        public FindServiceArea()
        {
            InitializeComponent();

            // Create the map, graphics overlay, and sketch editor.
            Initialize();
        }

        private void Initialize()
        {
            // Center the map on San Diego.
            Map streetsMap = new Map(Basemap.CreateLightGrayCanvasVector())
            {
                InitialViewpoint = new Viewpoint(32.73, -117.14, 30000)
            };
            MyMapView.Map = streetsMap;

            // Create graphics overlays for all of the elements of the map.
            MyMapView.GraphicsOverlays.Add(new GraphicsOverlay());

            // Add a new behavior for double taps on the MapView.
            MyMapView.GeoViewDoubleTapped += (s, e) =>
            {
                // If the sketch editor complete command is enabled, a sketch is in progress.
                if (MyMapView.SketchEditor.CompleteCommand.CanExecute(null))
                {
                    // Set the event as handled.
                    e.Handled = true;

                    // Finish any drawing.
                    MyMapView.SketchEditor.CompleteCommand.Execute(null);

                    // Reset the UI.
                    DrawBarrierButton.Text = "Draw barrier";
                }
            };
        }

        private async void PlaceFacilityButton_Click(object sender, EventArgs e)
        {
            try
            {
                // Let the user tap on the map view using the point sketch mode.
                SketchCreationMode creationMode = SketchCreationMode.Point;
                Geometry geometry = await MyMapView.SketchEditor.StartAsync(creationMode, false);

                // Symbology for a facility.
                PictureMarkerSymbol facilitySymbol = new PictureMarkerSymbol(new Uri("https://static.arcgis.com/images/Symbols/SafetyHealth/Hospital.png"))
                {
                    Height = 30,
                    Width = 30
                };

                // Create a graphic for the facility.
                Graphic facilityGraphic = new Graphic(geometry, new Dictionary<string, object>() { { "Type", "Facility" } }, facilitySymbol)
                {
                    ZIndex = 2
                };

                // Add the graphic to the graphics overlay.
                MyMapView.GraphicsOverlays[0].Graphics.Add(facilityGraphic);
            }
            catch (TaskCanceledException)
            {
                // Ignore this exception.
            }
            catch (Exception ex)
            {
                // Report exceptions.
                await Application.Current.MainPage.DisplayAlert("Error", "Error drawing facility:\n" + ex.Message, "OK");
            }
        }

        private async void DrawBarrierButton_Click(object sender, EventArgs e)
        {
            // Finish drawing barriers if started.
            if (DrawBarrierButton.Text != "Draw barrier")
            {
                if (MyMapView.SketchEditor.CompleteCommand.CanExecute(null))
                    MyMapView.SketchEditor.CompleteCommand.Execute(null);

                DrawBarrierButton.Text = "Draw barrier";
                return;
            }
            try
            {
                // Update the UI.
                DrawBarrierButton.Text = "Finish drawing";

                // Let the user draw on the map view using the polyline sketch mode.
                SketchCreationMode creationMode = SketchCreationMode.Polyline;
                Geometry geometry = await MyMapView.SketchEditor.StartAsync(creationMode, false);

                // Symbol for the barriers.
                SimpleLineSymbol barrierSymbol = new SimpleLineSymbol(SimpleLineSymbolStyle.Solid, System.Drawing.Color.Black, 5.0f);

                // Create the graphic to be used for barriers.
                Graphic barrierGraphic = new Graphic(geometry, new Dictionary<string, object>() { { "Type", "Barrier" } }, barrierSymbol)
                {
                    ZIndex = 1
                };

                // Add a graphic from the polyline the user drew.
                MyMapView.GraphicsOverlays[0].Graphics.Add(barrierGraphic);
            }
            catch (TaskCanceledException)
            {
                // Ignore this exception.
            }
            catch (Exception ex)
            {
                // Report exceptions.
                await Application.Current.MainPage.DisplayAlert("Error", "Error drawing barrier:\n" + ex.Message, "OK");
            }
        }

        private async void ShowServiceAreasButton_Click(object sender, EventArgs e)
        {
            // Finish any drawing in progress.
            if (MyMapView.SketchEditor.CompleteCommand.CanExecute(null))
            {
                MyMapView.SketchEditor.CompleteCommand.Execute(null);

                DrawBarrierButton.Text = "Draw barrier";
            }

            // Use a local variable for the graphics overlay.
            GraphicCollection allGraphics = MyMapView.GraphicsOverlays[0].Graphics;

            // Get a list of the facilities from the graphics overlay.
            List<ServiceAreaFacility> serviceAreaFacilities = (from g in allGraphics
                                                               where (string)g.Attributes["Type"] == "Facility"
                                                               select new ServiceAreaFacility((MapPoint)g.Geometry)).ToList();

            // Check that there is at least 1 facility to find a service area for.
            if (!serviceAreaFacilities.Any())
            {
                await Application.Current.MainPage.DisplayAlert("Error", "Must have at least one Facility!", "OK");
                return;
            }

            // Create the service area task and parameters based on the Uri.
            ServiceAreaTask serviceAreaTask = await ServiceAreaTask.CreateAsync(_serviceAreaUri);

            // Store the default parameters for the service area in an object.
            ServiceAreaParameters serviceAreaParameters = await serviceAreaTask.CreateDefaultParametersAsync();

            // Add impedance cutoffs for facilities (drive time minutes).
            serviceAreaParameters.DefaultImpedanceCutoffs.Add(2.0);
            serviceAreaParameters.DefaultImpedanceCutoffs.Add(5.0);

            // Set the level of detail for the polygons.
            serviceAreaParameters.PolygonDetail = ServiceAreaPolygonDetail.High;

            // Get a list of the barriers from the graphics overlay.
            List<PolylineBarrier> polylineBarriers = (from g in allGraphics
                                                      where (string)g.Attributes["Type"] == "Barrier"
                                                      select new PolylineBarrier((Polyline)g.Geometry)).ToList();

            // Add the barriers to the service area parameters.
            serviceAreaParameters.SetPolylineBarriers(polylineBarriers);

            // Update the parameters to include all of the placed facilities.
            serviceAreaParameters.SetFacilities(serviceAreaFacilities);

            // Clear existing graphics for service areas.
            foreach (Graphic g in allGraphics.ToList())
            {
                // Check if the graphic g is a service area.
                if ((string)g.Attributes["Type"] == "ServiceArea")
                {
                    allGraphics.Remove(g);
                }
            }

            try
            {
                // Solve for the service area of the facilities.
                ServiceAreaResult result = await serviceAreaTask.SolveServiceAreaAsync(serviceAreaParameters);

                // Loop over each facility.
                for (int i = 0; i < serviceAreaFacilities.Count; i++)
                {
                    // Create list of polygons from a service facility.
                    List<ServiceAreaPolygon> polygons = result.GetResultPolygons(i).ToList();

                    // Symbol for the outline of the service areas.
                    SimpleLineSymbol serviceOutline = new SimpleLineSymbol(SimpleLineSymbolStyle.Solid, System.Drawing.Color.DarkGray, 3.0f);

                    // Create a list of fill symbols for the polygons.
                    List<SimpleFillSymbol> fillSymbols = new List<SimpleFillSymbol>();
                    fillSymbols.Add(new SimpleFillSymbol(SimpleFillSymbolStyle.Solid, System.Drawing.Color.FromArgb(70, 255, 0, 0), serviceOutline));
                    fillSymbols.Add(new SimpleFillSymbol(SimpleFillSymbolStyle.Solid, System.Drawing.Color.FromArgb(70, 255, 165, 0), serviceOutline));

                    // Loop over every polygon in every facilities result.
                    for (int j = 0; j < polygons.Count; j++)
                    {
                        // Create the graphic for the service areas, alternating between fill symbols.
                        Graphic serviceGraphic = new Graphic(polygons[j].Geometry, new Dictionary<string, object>() { { "Type", "ServiceArea" } }, fillSymbols[j % 2])
                        {
                            ZIndex = 0
                        };

                        // Add graphic for service area. Alternate the color of each polygon.
                        allGraphics.Add(serviceGraphic);
                    }
                }
            }
            catch (Esri.ArcGISRuntime.Http.ArcGISWebException exception)
            {
                if (exception.Message.ToString().Equals("Unable to complete operation."))
                {
                    await Application.Current.MainPage.DisplayAlert("Error", "Facility not within San Diego area!", "OK");
                }
                else
                {
                    await Application.Current.MainPage.DisplayAlert("Error", "An ArcGIS web exception occurred. \n" + exception.Message, "OK");
                }
            }
        }

        private void Reset_Click(object sender, EventArgs e)
        {
            // Clear all of the graphics.
            MyMapView.GraphicsOverlays[0].Graphics.Clear();
        }
    }
}
XAML
<?xml version="1.0" encoding="utf-8" ?>
<ContentPage xmlns="http://xamarin.com/schemas/2014/forms"
             xmlns:x="http://schemas.microsoft.com/winfx/2009/xaml"
             xmlns:esriUI="clr-namespace:Esri.ArcGISRuntime.Xamarin.Forms;assembly=Esri.ArcGISRuntime.Xamarin.Forms"
             x:Class="ArcGISRuntime.Samples.FindServiceArea.FindServiceArea"
             Title="Find service area (interactive)">
    <Grid>
        <Grid.RowDefinitions>
            <RowDefinition Height="auto" />
            <RowDefinition Height="auto" />
            <RowDefinition Height="auto" />
            <RowDefinition Height="*" />
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*" />
            <ColumnDefinition Width="*" />
        </Grid.ColumnDefinitions>
        <Button x:Name="PlaceFacilityButton"
                        Grid.Row="0" Grid.Column="0"
                        Text="Place Facility"
                        Clicked="PlaceFacilityButton_Click"
                        HorizontalOptions="FillAndExpand" />
        <Button x:Name="DrawBarrierButton"
                        Grid.Row="0" Grid.Column="1"
                        Text="Draw Barrier"
                        Clicked="DrawBarrierButton_Click"
                        HorizontalOptions="FillAndExpand" />
        <Button x:Name="ShowServiceAreasButton"
                        Grid.Row="1"
                        Grid.ColumnSpan="2"
                        Text="Show Service Areas"
                        Clicked="ShowServiceAreasButton_Click"
                        HorizontalOptions="FillAndExpand" />
        <Button x:Name="ResetButton"
                        Grid.Row="2"
                        Grid.ColumnSpan="2"
                        Text="Reset"
                        Clicked="Reset_Click"
                        HorizontalOptions="FillAndExpand" />
        <esriUI:MapView x:Name="MyMapView"  
                        Grid.Row="3" 
                        Grid.ColumnSpan="2"/>
    </Grid>
</ContentPage>
See Also
Additional Examples
Hyperlink to ExampleDescription
FindServiceAreaFind the service area within a network from a given point.