Click or drag to resize

CompositeSymbol Class

Defines a set of symbols that make up a single symbol.
Inheritance Hierarchy

Namespace:  Esri.ArcGISRuntime.Symbology
Assembly:  Esri.ArcGISRuntime (in Esri.ArcGISRuntime.dll) Version: 100.11.0
public sealed class CompositeSymbol : Symbol

The CompositeSymbol type exposes the following members.

Public propertySymbols
Gets the symbols contained in the composite symbol.
Public methodClone
Clones this instance of Symbol and its members.
(Inherited from Symbol.)
Public methodCode exampleCreateSwatchAsync(Double)
Creates a swatch image of this symbol using the default size and a transparent background.
(Inherited from Symbol.)
Public methodCreateSwatchAsync(Color, Double)
Creates a swatch image of this symbol, using the default sizing and a transparent background.
(Inherited from Symbol.)
Public methodCreateSwatchAsync(Int32, Int32, Double, Color)
Creates a swatch image of this symbol, scaled to fit the specified dimensions.
(Inherited from Symbol.)
Public methodCreateSwatchAsync(Int32, Int32, Single, Color, Geometry)
Creates a swatch image of this symbol, with the specified image size, dpi, background color, and geometry.
(Inherited from Symbol.)
Public methodToJson
Returns the json representation of the symbol
(Inherited from Symbol.)
Public eventPropertyChanged
Occurs when a property value changes.
(Inherited from Symbol.)


Example Name: OfflineRouting

Solve a route on-the-fly using offline data.

Code example screen shot.

// Copyright 2019 Esri.
// Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.
// You may obtain a copy of the License at:
// Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific
// language governing permissions and limitations under the License.

using ArcGISRuntime.Samples.Managers;
using Esri.ArcGISRuntime.Geometry;
using Esri.ArcGISRuntime.Mapping;
using Esri.ArcGISRuntime.Symbology;
using Esri.ArcGISRuntime.Tasks.NetworkAnalysis;
using Esri.ArcGISRuntime.UI;
using Esri.ArcGISRuntime.UI.Controls;
using System;
using System.Collections.Generic;
using System.Diagnostics;
using System.Drawing;
using System.IO;
using System.Linq;
using System.Reflection;
using System.Threading.Tasks;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Input;
using Point = System.Windows.Point;

namespace ArcGISRuntime.WPF.Samples.OfflineRouting
        name: "Offline routing",
        category: "Network analysis",
        description: "Solve a route on-the-fly using offline data.",
        instructions: "Click near a road to start adding a stop to the route, click again to place it on the map. A number graphic will show its order in the route. After adding at least 2 stops, a route will display. Choose \"Fastest\" or \"Shortest\" to control how the route is optimized. The route will update on-the-fly while moving stops. The green box marks the boundary of the routable area provided by the offline data. This sample limits routes to 5 stops for performance reasons.",
        tags: new[] { "connectivity", "disconnected", "fastest", "locator", "navigation", "network analysis", "offline", "routing", "routing", "shortest", "turn-by-turn" })]
    public partial class OfflineRouting
        // Graphics overlays for holding graphics.
        private GraphicsOverlay _stopsOverlay;
        private GraphicsOverlay _routeOverlay;

        // Route task and parameters.
        private RouteTask _offlineRouteTask;
        private RouteParameters _offlineRouteParameters;

        // List of travel modes, like 'Fastest' and 'Shortest'.
        private List<TravelMode> _availableTravelModes;

        // Track the graphic being interacted with.
        private Graphic _selectedStopGraphic;

        // The area covered by the geodatabase used for offline routing.
        private readonly Envelope _routableArea = new Envelope(new MapPoint(-13045352.223196, 3864910.900750, 0, SpatialReferences.WebMercator),
            new MapPoint(-13024588.857198, 3838880.505604, 0, SpatialReferences.WebMercator));

        public OfflineRouting()

        private async void Initialize()
                // Get the paths to resources used by the sample.
                string basemapTilePath = DataManager.GetDataFolder("567e14f3420d40c5a206e5c0284cf8fc", "streetmap_SD.tpk");
                string networkGeodatabasePath = DataManager.GetDataFolder("567e14f3420d40c5a206e5c0284cf8fc", "sandiego.geodatabase");

                // Create the tile cache representing the offline basemap.
                TileCache tiledBasemapCache = new TileCache(basemapTilePath);

                // Create a tiled layer to display the offline tiles.
                ArcGISTiledLayer offlineTiledLayer = new ArcGISTiledLayer(tiledBasemapCache);

                // Create a basemap based on the tile layer.
                Basemap offlineBasemap = new Basemap(offlineTiledLayer);

                // Create a new map with the offline basemap.
                Map theMap = new Map(offlineBasemap);

                // Set the initial viewpoint to show the routable area.
                theMap.InitialViewpoint = new Viewpoint(_routableArea);

                // Show the map in the map view.
                MyMapView.Map = theMap;

                // Create overlays for displaying the stops and the calculated route.
                _stopsOverlay = new GraphicsOverlay();
                _routeOverlay = new GraphicsOverlay();

                // Create a symbol and renderer for symbolizing the calculated route.
                SimpleLineSymbol routeSymbol = new SimpleLineSymbol(SimpleLineSymbolStyle.Solid, Color.Blue, 2);
                _routeOverlay.Renderer = new SimpleRenderer(routeSymbol);

                // Add the stops and route overlays to the map.

                // Create the route task, referring to the offline geodatabase with the street network.
                _offlineRouteTask = await RouteTask.CreateAsync(networkGeodatabasePath, "Streets_ND");

                // Get the list of available travel modes.
                _availableTravelModes = _offlineRouteTask.RouteTaskInfo.TravelModes.ToList();

                // Update the UI with the travel modes list.
                TravelModesCombo.ItemsSource = _availableTravelModes;
                TravelModesCombo.SelectedIndex = 0;

                // Create the default parameters.
                _offlineRouteParameters = await _offlineRouteTask.CreateDefaultParametersAsync();

                // Display the extent of the road network on the map.

                // Now that the sample is ready, hook up the tapped and hover events.
                MyMapView.GeoViewTapped += MapView_Tapped;
                MyMapView.MouseMove += MapView_MouseMoved;
                TravelModesCombo.SelectionChanged += TravelMode_SelectionChanged;
            catch (Exception e)
                ShowMessage("Couldn't start sample", "There was a problem starting the sample. See debug output for details.");

        private void DisplayBoundaryMarker()
            // Displaying the boundary marker helps avoid choosing a non-routable destination.
            SimpleLineSymbol boundarySymbol = new SimpleLineSymbol(SimpleLineSymbolStyle.Dash, Color.LawnGreen, 5);
            Graphic boundary = new Graphic(_routableArea, boundarySymbol);
            GraphicsOverlay boundaryOverlay = new GraphicsOverlay();

        private void ResetRoute()

            // Reset the error message.
            ErrorTextBlock.Text = "";

        private async void UpdateRoute(TravelMode selectedTravelMode)
                // Create a list of stops.
                List<Stop> stops = new List<Stop>();

                // Add a stop to the list for each graphic in the stops overlay.
                foreach (Graphic stopGraphic in _stopsOverlay.Graphics)
                    Stop stop = new Stop((MapPoint) stopGraphic.Geometry);

                if (stops.Count < 2)
                    // Don't route, there's no where to go (and the route task would throw an exception).

                // Configure the route parameters with the list of stops.

                // Configure the travel mode.
                _offlineRouteParameters.TravelMode = selectedTravelMode;

                // Solve the route.
                RouteResult offlineRouteResult = await _offlineRouteTask.SolveRouteAsync(_offlineRouteParameters);

                // Clear the old route result.

                // Get the geometry from the route result.
                Polyline routeGeometry = offlineRouteResult.Routes.First().RouteGeometry;

                // Note: symbology left out here because the symbology was set once on the graphics overlay.
                Graphic routeGraphic = new Graphic(routeGeometry);

                // Display the route.
            catch (Exception e)
                ShowMessage("Couldn't update route", "There was an error updating the route. See debug output for details.");
                _selectedStopGraphic = null;

        private async void AddStop(Point tappedPosition)
                // Get the location on the map.
                MapPoint tappedLocation = MyMapView.ScreenToLocation(tappedPosition);

                // Name the stop by its number.
                string stopName = $"{_stopsOverlay.Graphics.Count + 1}";

                // Create a pushpin marker for the stop.
                PictureMarkerSymbol pushpinMarker = await GetPictureMarker();

                // Create the text symbol for labeling the stop.
                TextSymbol stopSymbol = new TextSymbol(stopName, Color.White, 15,
                    Esri.ArcGISRuntime.Symbology.HorizontalAlignment.Center, Esri.ArcGISRuntime.Symbology.VerticalAlignment.Middle);
                stopSymbol.OffsetY = 15;

                // Create a combined symbol with the pushpin and the label.
                CompositeSymbol combinedSymbol = new CompositeSymbol(new MarkerSymbol[] {pushpinMarker, stopSymbol});

                // Create the graphic from the geometry and the symbology.
                Graphic newStopGraphic = new Graphic(tappedLocation, combinedSymbol);

                // Update the selection.
                _selectedStopGraphic = newStopGraphic;

                // Add the stop to the overlay.
            catch (Exception e)
                ShowMessage("Couldn't add stop", "Couldn't select or add stop. See debug output for details.");

        private async Task<PictureMarkerSymbol> GetPictureMarker()
            // Get current assembly that contains the image.
            Assembly currentAssembly = Assembly.GetExecutingAssembly();

            // Get image as a stream from the resources.
            // Picture is defined as EmbeddedResource and DoNotCopy.
            Stream resourceStream = currentAssembly.GetManifestResourceStream(

            // Create new symbol using asynchronous factory method from stream.
            PictureMarkerSymbol pinSymbol = await PictureMarkerSymbol.CreateAsync(resourceStream);
            pinSymbol.Width = 50;
            pinSymbol.Height = 50;
            pinSymbol.LeaderOffsetX = 30;
            pinSymbol.OffsetY = 14;

            return pinSymbol;

        private void ResetButton_Click(object sender, RoutedEventArgs e) => ResetRoute();

        private void MapView_Tapped(object sender, GeoViewInputEventArgs e)
            // Reset the error message.
            ErrorTextBlock.Text = "";

            // Make sure the stop is valid before proceeding.
            if (!GeometryEngine.Contains(_routableArea, e.Location))
                ShowMessage("Can't add stop.", "That location is outside of the area where offline routing data is available.");

            if (_selectedStopGraphic == null && _stopsOverlay.Graphics.Count < 5)
                // Select or add a stop.
            else if (_selectedStopGraphic == null)
                ShowMessage("Can't add stop.", "Sample limits to 5 stops per route.");
                // Finish updating the geometry.
                _selectedStopGraphic.Geometry = e.Location;

                // Reset the selected graphic.
                _selectedStopGraphic = null;

                // Update the route with the final list of stops.

        private void MapView_MouseMoved(object sender, MouseEventArgs e)
            if (_selectedStopGraphic != null)
                // Get the position of the mouse relative to the map view.
                Point hoverPoint = e.GetPosition(MyMapView);

                // Get the physical map location corresponding to the mouse position.
                MapPoint hoverLocation = MyMapView.ScreenToLocation(hoverPoint);

                // Return if the location is outside the routable area.
                if (!GeometryEngine.Contains(_routableArea, hoverLocation))

                // Update the location of the stop graphic.
                _selectedStopGraphic.Geometry = hoverLocation;

                // Update the route with the temporary stop.
                UpdateRoute((TravelMode) TravelModesCombo.SelectedItem ?? _availableTravelModes.First());

        private void TravelMode_SelectionChanged(object sender, SelectionChangedEventArgs e)
                if (TravelModesCombo.SelectedItem == null)
                    TravelModesCombo.SelectedItem = _availableTravelModes.First();

                UpdateRoute((TravelMode) TravelModesCombo.SelectedItem);
            catch (Exception ex)
                ShowMessage("Couldn't change travel mode", "Couldn't change travel mode. See debug output for details.");

        private void ShowMessage(string title, string detail)
            ErrorTextBlock.Text = detail;
<UserControl x:Class="ArcGISRuntime.WPF.Samples.OfflineRouting.OfflineRouting"
        <esri:MapView x:Name="MyMapView" />
        <Border Style="{StaticResource BorderStyle}">
                    <RowDefinition Height="Auto" />
                    <RowDefinition Height="Auto" />
                    <RowDefinition Height="Auto" />
                    <RowDefinition Height="Auto" />
                    Text="Click the map to add up to 5 stops. Click again to finish placing it. Route lines will be displayed on-the-fly."
                    Grid.Row="0" Grid.Column="0"
                    FontWeight="SemiBold" TextWrapping="Wrap" />
                <ComboBox x:Name="TravelModesCombo"
                            <TextBlock Text="{Binding Name}" />
                <Button Content="Reset"
                        Click="ResetButton_Click" />
                <TextBlock x:Name="ErrorTextBlock"
                           Foreground="Red" />
See Also
Additional Examples
Hyperlink to ExampleDescription
OfflineRoutingSolve a route on-the-fly using offline data.
RouteAroundBarriersFind a route that reaches all stops without crossing any barriers.