Interface IConstructCircularArc
Provides access to members that construct a circular arc using other geometries and values.
[InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
[Guid("91B6F492-C70A-11D0-8307-0000F8034032")]
public interface IConstructCircularArc
Remarks



Methods
ConstructArcDistance(IPoint, IPoint, bool, double)
Constructs an arc from a center point, a starting point, and an arc length.
void ConstructArcDistance(IPoint Center, IPoint from, bool isCCW, double arcDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructArcDistance()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 50);
constructCircularArc.ConstructArcDistance(fromPoint, toPoint, true, 150);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructArcDistance()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pCenterPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pStartPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pCenterPoint = New ESRI.ArcGIS.Geometry.Point
pStartPoint = New ESRI.ArcGIS.Geometry.Point
pCenterPoint.PutCoords(100, 100)
pStartPoint.PutCoords(50, 50)
pConstructCircularArc.ConstructArcDistance(pCenterPoint, pStartPoint, True, 150)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingAngleArc(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, central angle and arc distance.
void ConstructBearingAngleArc(IPoint from, double inAngle, bool isCCW, double CentralAngle, double arcDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingAngleArc()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingAngleArc(fromPoint, 0, true, (90 * (Math.PI / 180)), 150);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingAngleArc()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim Pi As Double
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingAngleArc(pFromPoint, 0, True, (90 * (Pi / 180)), 150)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingAngleChord(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, central angle and chord distance.
void ConstructBearingAngleChord(IPoint from, double inAngle, bool isCCW, double CentralAngle, double chordDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingAngleChord()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingAngleChord(fromPoint, 0, true, (90 * (Math.PI / 180)), 150);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingAngleChord()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingAngleChord(pFromPoint, 0, True, (90 * (Pi / 180)), 100)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingAngleTangent(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, central angle and tangent distance.
void ConstructBearingAngleTangent(IPoint from, double inAngle, bool isCCW, double CentralAngle, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingAngleTangent()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingAngleTangent(fromPoint, 0, true, (90 * (Math.PI / 180)), 300);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingAngleTangent()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingAngleTangent(pFromPoint, 0, True, (90 * Pi) / 180, 300)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingArcTangent(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, arc distance and tangent distance.
void ConstructBearingArcTangent(IPoint from, double inAngle, bool isCCW, double arcDistance, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingArcTangent()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingArcTangent(fromPoint, 0, true, 100, 300);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingArcTangent()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingArcTangent(pFromPoint, 0, True, 100, 300)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingChordArc(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, chord distance and arc distance (negative for clockwise orientation).
void ConstructBearingChordArc(IPoint from, double inAngle, bool isCCW, double chordDistance, double arcDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingChordArc()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingChordArc(fromPoint, 0, true, 100, 300);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingChordArc()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingChordArc(pFromPoint, 0, True, 100, 300)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingChordTangent(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, chord distance and tangent distance.
void ConstructBearingChordTangent(IPoint from, double inAngle, bool isCCW, double chordDistance, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingChordTangent()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingChordTangent(fromPoint, 0, true, 100, 300);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingChordTangent()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingChordTangent(pFromPoint, 0, True, 100, 300)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingRadiusAngle(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, radius and central angle.
void ConstructBearingRadiusAngle(IPoint startPoint, double inAngle, bool isCCW, double inRadius, double CentralAngle)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingRadiusAngle()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingRadiusAngle(fromPoint, 0, true, 40, Math.PI);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingRadiusAngle()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingRadiusAngle(pFromPoint, 0, True, 40, Pi)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingRadiusArc(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, radius and arc distance.
void ConstructBearingRadiusArc(IPoint from, double inAngle, bool isCCW, double inRadius, double arcDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingRadiusArc()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingRadiusArc(fromPoint, 0, true, 40, 40);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingRadiusArc()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingRadiusArc(pFromPoint, 0, True, 40, 40)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingRadiusChord(IPoint, double, bool, double, double, bool)
Constructs an arc with the given chord bearing, radius and chord distance.
void ConstructBearingRadiusChord(IPoint from, double inAngle, bool isCCW, double inRadius, double chordDistance, bool IsMinor)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingRadiusChord()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingRadiusChord(fromPoint, 0, true, 40, 40, true);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingRadiusChord()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingRadiusChord(pFromPoint, 0, True, 40, 40, True)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructBearingRadiusTangent(IPoint, double, bool, double, double)
Constructs an arc with the given chord bearing, radius and tangent distance.
void ConstructBearingRadiusTangent(IPoint from, double inAngle, bool isCCW, double inRadius, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructBearingRadiusTangent()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructBearingRadiusTangent(fromPoint, 0, true, 40, 1000);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructBearingRadiusTangent()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructBearingRadiusTangent(pFromPoint, 0, True, 40, 1000)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructChordDistance(IPoint, IPoint, bool, double)
Constructs an arc from a center point, a starting point, and a chord length.
void ConstructChordDistance(IPoint Center, IPoint from, bool isCCW, double chordDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"
Note : To construct a major CircularArc using the same paramaters use the IConstructCircularcArc2::ConstructChordDistanceEx method with the IsMinor parameter equal to false.

private void ConstructChordDistance()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 50); constructCircularArc.ConstructChordDistance(fromPoint, toPoint, true, 100); String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructChordDistance()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pCenterPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pCenterPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
pCenterPoint.PutCoords(50, 50)
pConstructCircularArc.ConstructChordDistance(pCenterPoint, pFromPoint, True, 100)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructCircle(IPoint, double, bool)
Constructs a circle of a given radius and orientation.
void ConstructCircle(IPoint CenterPoint, double Radius, bool isCCW)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

public ICircularArc CreateCircleArc(IPoint point, double radius, bool isCCW)
{
ICircularArc circularArc = new CircularArcClass();
IConstructCircularArc construtionCircularArc = circularArc as IConstructCircularArc;
construtionCircularArc.ConstructCircle(point, radius, isCCW);
return circularArc;
}
Public Function CreateCArcFull(ByVal pCPoint As ESRI.ArcGIS.Geometry.IPoint, ByVal Radius As Double, _
ByVal IsCCW As Boolean) As ESRI.ArcGIS.Geometry.ICircularArc
Dim pConstCArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
pConstCArc = New ESRI.ArcGIS.Geometry.CircularArc
pConstCArc.ConstructCircle(pCPoint, Radius, IsCCW)
CreateCArcFull = pConstCArc
End Function
ConstructEndPointsAngle(IPoint, IPoint, bool, double)
Constructs an arc from the given endpoints and central angle.
void ConstructEndPointsAngle(IPoint from, IPoint to, bool isCCW, double CentralAngle)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructEndPointsAngel()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 50);
constructCircularArc.ConstructEndPointsAngle(fromPoint, toPoint, true, 90);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructEndPointsAngle()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(50, 50)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructEndPointsAngle(pFromPoint, pToPoint, True, 90 * Pi / 180)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructEndPointsArc(IPoint, IPoint, bool, double)
Constructs an arc from the given endpoints and arc distance.
void ConstructEndPointsArc(IPoint from, IPoint to, bool isCCW, double arcDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructEndPointsArc()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 50);
constructCircularArc.ConstructEndPointsArc(fromPoint, toPoint, true, 200);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructEndPointsArc()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(50, 50)
pConstructCircularArc.ConstructEndPointsArc(pFromPoint, pToPoint, True, 200)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructEndPointsChordHeight(IPoint, IPoint, bool, double)
Constructs an arc with specified endpoints and and chord height.
void ConstructEndPointsChordHeight(IPoint from, IPoint to, bool isCCW, double ChordHeight)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructEndPointsChordHeight()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint1 = new PointClass();
fromPoint1.PutCoords(100, 100);
IPoint toPoint1 = new PointClass();
toPoint1.PutCoords(50, 50);
constructCircularArc.ConstructEndPointsChordHeight(fromPoint1, toPoint1, true, 100);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructEndPointsChordHeight()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(50, 50)
pConstructCircularArc.ConstructEndPointsChordHeight(pFromPoint, pToPoint, True, 100)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructEndPointsRadius(IPoint, IPoint, bool, double, bool)
Constructs an arc from the given endpoints and radius.
void ConstructEndPointsRadius(IPoint from, IPoint to, bool isCCW, double inRadius, bool IsMinor)
Parameters
Remarks

private void ConstructEndPointsRadius()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 50);
constructCircularArc.ConstructEndPointsRadius(fromPoint, toPoint, true, 90, true);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructEndPointsRadius()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(50, 50)
pConstructCircularArc.ConstructEndPointsRadius(pFromPoint, pToPoint, True, 100, False)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructEndPointsTangent(IPoint, IPoint, bool, double)
Constructs an arc from the given endpoints and tangent distance.
void ConstructEndPointsTangent(IPoint from, IPoint to, bool isCCW, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"


ConstructFilletPoint(ISegment, ISegment, IPoint, IPoint)
Constructs an arc of given start point near first segment and tangent to two segments. hintPoint can be nil or can be a location near the desired fillet.
void ConstructFilletPoint(ISegment s1, ISegment s2, IPoint from, IPoint hintPoint)
Parameters
Remarks

private void ConstructFilletPoint()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint1 = new PointClass();
fromPoint1.PutCoords(100, 100);
IPoint toPoint1 = new PointClass();
toPoint1.PutCoords(50, 50);
ILine line1 = new LineClass();
line1.PutCoords(fromPoint1, toPoint1);
IPoint fromPoint2 = new PointClass();
fromPoint2.PutCoords(100, 100);
IPoint toPoint2 = new PointClass();
toPoint2.PutCoords(150, 50);
ILine line2 = new LineClass();
line2.PutCoords(fromPoint2, toPoint2);
IPoint hintPoint = new PointClass();
hintPoint.PutCoords(100, 75);
constructCircularArc.ConstructFilletPoint(line1 as ISegment, line2 as ISegment, line1.ToPoint, hintPoint);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructFilletPoint()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
Dim pLine2 As ESRI.ArcGIS.Geometry.ILine
Dim pHintPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pLine2 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(50, 50)
pLine1.PutCoords(pFromPoint, pToPoint)
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(150, 50)
pLine2.PutCoords(pFromPoint, pToPoint)
pHintPoint = New ESRI.ArcGIS.Geometry.Point
pHintPoint.PutCoords(100, 75)
pConstructCircularArc.ConstructFilletPoint(pLine1, pLine2, pLine1.ToPoint, pHintPoint)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructFilletRadius(ISegment, ISegment, double, IPoint)
Constructs an arc of given radius and tangent to two segments. hintPoint can be nil or can be a location near the desired fillet.
void ConstructFilletRadius(ISegment s1, ISegment s2, double inRadius, IPoint hintPoint)
Parameters
Remarks

private void ConstructFilletRadius()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint1 = new PointClass();
fromPoint1.PutCoords(100, 100);
IPoint toPoint1 = new PointClass();
toPoint1.PutCoords(50, 50);
ILine line1 = new LineClass();
line1.PutCoords(fromPoint1, toPoint1);
IPoint fromPoint2 = new PointClass();
fromPoint2.PutCoords(100, 100);
IPoint toPoint2 = new PointClass();
toPoint2.PutCoords(150, 50);
ILine line2 = new LineClass();
line2.PutCoords(fromPoint2, toPoint2);
IPoint hintPoint = new PointClass();
hintPoint.PutCoords(100, 75);
constructCircularArc.ConstructFilletRadius(line1 as ISegment, line2 as ISegment, 50, hintPoint);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructFilletRadius()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
Dim pLine2 As ESRI.ArcGIS.Geometry.ILine
Dim pHintPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pLine2 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(50, 50)
pLine1.PutCoords(pFromPoint, pToPoint)
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(150, 50)
pLine2.PutCoords(pFromPoint, pToPoint)
pHintPoint = New ESRI.ArcGIS.Geometry.Point
pHintPoint.PutCoords(100, 75)
pConstructCircularArc.ConstructFilletRadius(pLine1, pLine2, 50, pHintPoint)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentAndPoint(ISegment, bool, IPoint)
Constructs an arc with one endpoint being p, tangent to s, and connected to s. If atFrom is true, the connection is at s's from point, otherwise at s's to point.
void ConstructTangentAndPoint(ISegment s, bool atFrom, IPoint p)
Parameters
Remarks

private void ConstructTangentAndPoint()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint1 = new PointClass();
fromPoint1.PutCoords(100, 100);
IPoint toPoint1 = new PointClass();
toPoint1.PutCoords(50, 50);
ILine line1 = new LineClass();
line1.PutCoords(fromPoint1, toPoint1);
IPoint point = new PointClass();
point.PutCoords(100, 75);
constructCircularArc.ConstructTangentAndPoint(line1 as ISegment, false, point);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentAndPoint()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pPoint = New ESRI.ArcGIS.Geometry.Point
pPoint.PutCoords(200, 400)
pConstructCircularArc.ConstructTangentAndPoint(pLine1, False, pPoint)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentAngleArc(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to the input segment, a given central angle and an arc length.
void ConstructTangentAngleArc(ISegment Segment, bool atStart, bool isCCW, double CentralAngle, double arcDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructTangentAngleArc()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
IPoint toPoint = new PointClass();
toPoint.PutCoords(100, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructTangentAngleArc(line as ISegment, false, true, Math.PI, 100);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentAngleArc()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pPoint = New ESRI.ArcGIS.Geometry.Point
pPoint.PutCoords(200, 400)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentAngleArc(pLine1, False, True, Pi, 100)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentAngleChord(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to the input segment, a given central angle and a chord length.
void ConstructTangentAngleChord(ISegment Segment, bool atStart, bool isCCW, double CentralAngle, double chordDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"


private void ConstructTangentAngleChord()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
IPoint toPoint = new PointClass();
toPoint.PutCoords(100, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructTangentAngleChord(line as ISegment, false, true, Math.PI, 100);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentAngleChord()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pPoint = New ESRI.ArcGIS.Geometry.Point
pPoint.PutCoords(200, 400)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentAngleChord(pLine1, False, False, Pi, 100)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentAngleTangent(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to the input segment, a given central angle and a tangent length.
void ConstructTangentAngleTangent(ISegment Segment, bool atStart, bool isCCW, double CentralAngle, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"


private void ConstructTangentAngleTangent()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
IPoint toPoint = new PointClass();
toPoint.PutCoords(100, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructTangentAngleTangent(line as ISegment, false, true, Math.PI / 2, 100);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentAngleTangent()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pPoint = New ESRI.ArcGIS.Geometry.Point
pPoint.PutCoords(200, 400)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentAngleTangent(pLine1, False, True, Pi / 2, 100)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentArcTangent(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to the input segment, a given arc length and a tangent length.
void ConstructTangentArcTangent(ISegment Segment, bool atStart, bool isCCW, double arcDistance, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"


private void ConstructTangentArcTangent()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
IPoint toPoint = new PointClass();
toPoint.PutCoords(100, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructTangentArcTangent(line as ISegment, false, true, 157.08, 100);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentArcTangent()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pPoint = New ESRI.ArcGIS.Geometry.Point
pPoint.PutCoords(200, 400)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentArcTangent(pLine1, False, True, 157.08, 100)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentChordArc(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to the input segment, a given chord length and an arc length.
void ConstructTangentChordArc(ISegment Segment, bool atStart, bool isCCW, double chordDistance, double arcDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"


private void ConstructTangentChordArc()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
IPoint toPoint = new PointClass();
toPoint.PutCoords(100, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructTangentChordArc(line as ISegment, false, true, 100, 157.08);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentChordArc()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pPoint = New ESRI.ArcGIS.Geometry.Point
pPoint.PutCoords(200, 400)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentChordArc(pLine1, False, True, 100, 157.08)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentChordTangent(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to input segment, a given chord length and a tangent length.
void ConstructTangentChordTangent(ISegment Segment, bool atStart, bool isCCW, double chordDistance, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"


private void ConstructTangentChordTangent()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
IPoint toPoint = new PointClass();
toPoint.PutCoords(100, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructTangentChordTangent(line as ISegment, false, true, 100, 100000000);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentChordTangent()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pPoint = New ESRI.ArcGIS.Geometry.Point
pPoint.PutCoords(200, 400)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentChordTangent(pLine1, False, True, 100, 100000000)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentDistance(IPoint, IPoint, bool, double)
Constructs an arc from a center point, a starting point, and an tangent length.
void ConstructTangentDistance(IPoint Center, IPoint from, bool isCCW, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructTangentDistance()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 50);
constructCircularArc.ConstructTangentDistance(fromPoint, toPoint, true, 100000000);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentDistance()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pCenterPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pStartPoint As ESRI.ArcGIS.Geometry.IPoint
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pCenterPoint = New ESRI.ArcGIS.Geometry.Point
pStartPoint = New ESRI.ArcGIS.Geometry.Point
pCenterPoint.PutCoords(200, 100)
pStartPoint.PutCoords(100, 100)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentDistance(pCenterPoint, pStartPoint, True, 100000000)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentRadiusAngle(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to the input segment, a given radius and a central angle.
void ConstructTangentRadiusAngle(ISegment Segment, bool atStart, bool isCCW, double inRadius, double CentralAngle)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructTangentRadiusAngle()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
fromPoint.PutCoords(100, 100);
IPoint toPoint = new PointClass();
toPoint.PutCoords(100, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
//The angles should be in Radians (Radians = Degrees * PI/180)
constructCircularArc.ConstructTangentRadiusAngle(line as ISegment, false, true, 50, Math.PI);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentRadiusAngle()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentRadiusAngle(pLine1, False, True, 50, Pi)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentRadiusArc(ISegment, bool, bool, double, double)
Constructs an arc having a common tangent to the input segment, a given radius and an arc length.
void ConstructTangentRadiusArc(ISegment Segment, bool atStart, bool isCCW, double inRadius, double arcDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"

private void ConstructTangentRadiusArc()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 50);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
constructCircularArc.ConstructTangentRadiusArc(line as ISegment, false, true, 50, 157.08);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentRadiusArc()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
'The angles should be in Radians (Radians = Degrees * PI/180)
pConstructCircularArc.ConstructTangentRadiusArc(pLine1, False, True, 50, 157.08)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentRadiusChord(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to the input segment, a given radius and a chord length.
void ConstructTangentRadiusChord(ISegment Segment, bool atStart, bool isCCW, double inRadius, double chordDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"
Note : To construct a major CircularArc using the same paramaters use the IConstructCircularcArc2::ConstructTangentRadiusChordEx method with the IsMinor parameter equal to false.


private void onstructTangentRadiusChord()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
constructCircularArc.ConstructTangentRadiusChord(line as ISegment, false, true, 50, 100);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentRadiusChord()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim Pi As Double
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
Pi = 4 * Math.Atan(1) 'Calculate the value of pi.
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pConstructCircularArc.ConstructTangentRadiusChord(pLine1, False, True, 50, 100)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructTangentRadiusTangent(ISegment, bool, bool, double, double)
Constructs an arc with a common tangent to the input segment, a given radius and a tangent length.
void ConstructTangentRadiusTangent(ISegment Segment, bool atStart, bool isCCW, double inRadius, double tangentDistance)
Parameters
Remarks
-isCCW stands for "is counter clockwise"


private void ConstructTangentRadiusTangent()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint = new PointClass();
IPoint toPoint = new PointClass();
fromPoint.PutCoords(100, 100);
toPoint.PutCoords(50, 400);
ILine line = new LineClass();
line.PutCoords(fromPoint, toPoint);
constructCircularArc.ConstructTangentRadiusTangent(line as ISegment, false, true, 50, 50);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}
Private Sub ConstructTangentRadiusTangent()
Dim pConstructCircularArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
Dim pCArc As ESRI.ArcGIS.Geometry.ICircularArc
Dim pToPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pFromPoint As ESRI.ArcGIS.Geometry.IPoint
Dim pLine1 As ESRI.ArcGIS.Geometry.ILine
pConstructCircularArc = New ESRI.ArcGIS.Geometry.CircularArc
pCArc = pConstructCircularArc
pFromPoint = New ESRI.ArcGIS.Geometry.Point
pToPoint = New ESRI.ArcGIS.Geometry.Point
pLine1 = New ESRI.ArcGIS.Geometry.Line
pFromPoint.PutCoords(100, 100)
pToPoint.PutCoords(100, 400)
pLine1.PutCoords(pFromPoint, pToPoint)
pConstructCircularArc.ConstructTangentRadiusTangent(pLine1, False, True, 50, 50)
Debug.Print("Length : " & pCArc.Length)
Debug.Print("Radius : " & pCArc.Radius)
Debug.Print("Chord Height : " & pCArc.ChordHeight)
Debug.Print("Central Angle (Rad) : " & pCArc.CentralAngle)
Debug.Print("From Angle (Rad) : " & pCArc.FromAngle)
Debug.Print("To Angle (Rad) : " & pCArc.ToAngle)
Debug.Print("Center Point : " & pCArc.CenterPoint.X & " , " & pCArc.CenterPoint.Y)
Debug.Print("From Point : " & pCArc.FromPoint.X & " , " & pCArc.FromPoint.Y)
Debug.Print("To Point : " & pCArc.ToPoint.X & " , " & pCArc.ToPoint.Y)
End Sub
ConstructThreePoints(IPoint, IPoint, IPoint, bool)
Constructs an arc from three points. useExistingCenter can be set to true in order to help create a reasonable arc when from and to are identical.
void ConstructThreePoints(IPoint from, IPoint middle, IPoint to, bool useExistingCenter)
Parameters
Remarks
ConstructThreePoints is excellent for creating a CircularArc with exact endpoint coordinates.
The from and to points may be identical, in which case the third point, if it is distinct, will be on the circle and diametrically opposed to the from/to point (orientation will be clockwise).

public ICircularArc CreateCArcThreePoint(IPoint fromPoint, IPoint thruPoint,IPoint toPoint)
{
ICircularArc circularArcThreePoint = new CircularArcClass();
IConstructCircularArc construtionCircularArc = circularArcThreePoint as IConstructCircularArc;
construtionCircularArc.ConstructThreePoints(fromPoint, thruPoint, toPoint, true);
return circularArcThreePoint;
}
Public Function CreateCArcThreePoint(ByVal FromPoint As ESRI.ArcGIS.Geometry.IPoint, ByVal ThruPoint As ESRI.ArcGIS.Geometry.IPoint, ByVal ToPoint As ESRI.ArcGIS.Geometry.IPoint) As ESRI.ArcGIS.Geometry.ICircularArc
Dim ConstCArc As ESRI.ArcGIS.Geometry.IConstructCircularArc
CreateCArcThreePoint = New ESRI.ArcGIS.Geometry.CircularArc
ConstCArc = CreateCArcThreePoint
ConstCArc.ConstructThreePoints(FromPoint, ThruPoint, ToPoint, True)
End Function
QueryFilletRadiusRange(ISegment, ISegment, IPoint, out double, out double)
Returns minimum and maximum radius for fillet to touch both input segments. hintPoint can be nil or can be a location near the desired fillet.
void QueryFilletRadiusRange(ISegment s1, ISegment s2, IPoint hintPoint, out double minRadius, out double maxRadius)
Parameters
Remarks

private void QueryFilletRadiusRange()
{
IConstructCircularArc constructCircularArc = new CircularArcClass();
ICircularArc circularArc = constructCircularArc as ICircularArc;
IPoint fromPoint1 = new PointClass();
fromPoint1.PutCoords(100, 100);
IPoint toPoint1 = new PointClass();
toPoint1.PutCoords(50, 50);
ILine line1 = new LineClass();
line1.PutCoords(fromPoint1, toPoint1);
IPoint fromPoint2 = new PointClass();
fromPoint2.PutCoords(100, 100);
IPoint toPoint2 = new PointClass();
toPoint2.PutCoords(150, 50);
ILine line2 = new LineClass();
line2.PutCoords(fromPoint2, toPoint2);
IPoint hintPoint = new PointClass();
hintPoint.PutCoords(100, 75);
//Discover min and max fillet radius
double minRadius;
double maxRadius;
constructCircularArc.QueryFilletRadiusRange(line1 as ISegment, line2 as ISegment, hintPoint, out minRadius, out maxRadius);
//Create a circular arc with the maxRadius
constructCircularArc.ConstructFilletRadius(line1 as ISegment, line2 as ISegment, maxRadius, hintPoint);
String report = "Length : " + circularArc.Length + "\n" +
"Radius : " + circularArc.Radius + "\n" +
"Chord Height : " + circularArc.ChordHeight + "\n" +
"Central Angle (Rad) : " + circularArc.CentralAngle + "\n" +
"From Angle (Rad) : " + circularArc.FromAngle + "\n" +
"To Angle (Rad) : " + circularArc.ToAngle + "\n" +
"Center Point : " + circularArc.CenterPoint.X + " , " + circularArc.CenterPoint.Y + "\n" +
"From Point : " + circularArc.FromPoint.X + " , " + circularArc.FromPoint.Y + "\n" +
"To Point : " + circularArc.ToPoint.X + " , " + circularArc.ToPoint.Y;
System.Windows.Forms.MessageBox.Show(report);
}