Namespace ESRI.ArcGIS.Geometry

The Geometry library defines spatial shapes, including points, polylines, and polygons, together with the types used to describe and manipulate them. It also supplies spatial-reference objects for geographic and projected coordinate systems.

Classes

AbridgedMolodenskyTransformationClass
AffineTransformation2DClass
AffineTransformation3DClass
AngularUnitClass
BezierCurveClass
BufferConstructionClass
CircularArcClass
CompositeGeoTransformationClass
CoordinateFrameTransformationClass
DatumClass
EllipticArcClass
EnvelopeClass
GEOCONTransformationClass
GeoTransformationClass
GeoTransformationOperationSetClass
GeocentricTranslationClass
Geographic2DOffsetTransformationClass
GeographicCoordinateSystemClass
GeometryArrayClass
GeometryBagClass
GeometryEnvironmentClass
GeometryServerImplClass
HARNTransformationClass
HVCompositeDatumTransformationClass
HVCompositeDatumTransformationEditorClass
HVDatumTransformationClass
JSONConverterGeometryClass
LineClass
LinePolygonHelperClass
LinearUnitClass
LongitudeRotationTransformationClass
MolodenskyBadekasPositionVectorTransformationClass
MolodenskyBadekasTransformationClass
MolodenskyTransformationClass
MultiPatchClass
MultipointClass
NADCON5TransformationClass
NADCONTransformationClass
NTv2TransformationClass
NTv2VelocityTransformationClass
NullTransformationClass
ParameterClass
PathClass
PointArrayClass
PointClass
PolygonArrayClass
PolygonClass
PolylineArrayClass
PolylineClass
PositionVectorTransformationClass
PrimeMeridianClass
ProjectedCoordinateSystemClass
ProjectionClass
ProjectiveTransformation2DClass
RayClass
RelationResultArrayClass
RelationResultClass
RingClass
SegmentGraphClass
SpatialReferenceEnvironmentClass
SphereClass
SpheroidClass
TexturePersistencePropertiesClass
TriangleFanClass
TriangleStripClass
TrianglesClass
UnitChangeTransformationClass
UnknownCoordinateSystemClass
Vector3DClass
VerticalCoordinateSystemClass
VerticalDatumClass

Structs

WKSPointVA
_WKSPointVA
_esriSegmentInfo
esriGeometryNetworkVertexInfo
esriGeometryNetworkVertexInfo3D
esriOriginalSegmentMapping
esriRelationPair
esriRelationPair64
esriSRHorizon
esriSegmentInfo

Interfaces

AbridgedMolodenskyTransformation

Creates an Abridged Molodensky transformation.

AffineTransformation2D

A two dimensional affine transformation.

AffineTransformation3D

A three dimensional transformation.

AngularUnit

Creates a angular unit of measure.

BezierCurve

A cubic Bezier curve defined between two points; optionally has measure, height and ID attributes at each endpoint.

BufferConstruction

Buffers collections of lines or collections of polygons.

CircularArc

A portion of a circle that connects two points optionally has measure, height and ID attributes at each endpoint.

CompositeGeoTransformation

Performs a sequence of geographic transformations.

CoordinateFrameTransformation

Creates a Coordinate Frame transformation.

Datum

Creates a datum.

EllipticArc

A portion of the boundary of a 2D ellipse that connects two points; optionally has measure, height and ID attributes at each endpoint.

Envelope

A rectangle with sides parallel to a coordinate system defining the extent of another geometry; optionally has min and max measure, height and ID attributes.

GEOCONTransformation

Creates a GEOCON-based transformation.

GeoTransformation

Generic geotransformation class, holds either a WKT (string) or a WKID (factory code).

GeoTransformationOperationSet

Stores a set of geographic transformation operators (GT + direction).

GeocentricTranslation

Creates a geocentric translation.

Geographic2DOffsetTransformation

Creates a geographic 2D offset transformation.

GeographicCoordinateSystem

Creates a geographic coordinate system.

GeometryArray
GeometryBag

An ordered collection of objects that support the IGeometry interface.

GeometryEnvironment

Provides a way of creating geometries from different inputs and setting/getting global variables for controlling behavior of geometry methods.

GeometryServerImpl

Provides access to standard operations on geometric 'value' objects. The input geometries are never modified by these operations. Designed for use in building web services or other kinds of distributed applications.

HARNTransformation

Creates a HARN-based transformation.

HVCompositeDatumTransformation

Horizonatal and Vertical datum transformation.

HVCompositeDatumTransformationEditor

The editor for the HVCompositeDatumTransformation.

HVDatumTransformation

Horizonatal and Vertical datum transformation.

IAffineTransformation2D

Provides access to members that define and manipulate affine transformations.

IAffineTransformation2D2

Provides access to members that define and manipulate affine transformations.

IAffineTransformation2D3

Provides access to members that define and manipulate affine transformations.

IAffineTransformation2D3GEN

Provides access to members that define and manipulate affine transformations. IAffineTransformation2D3GEN is generic version of IAffineTransformation2D3

IAffineTransformation3D

Provides access to members that define and manipulate affine transformations in 3D.

IAffineTransformation3D2
IAffineTransformation3DGEN

Provides access to members that define and manipulate affine transformations in 3D. IAffineTransformation3DGEN is generic version of IAffineTransformation3D.

IAngularUnit

Provides access to members that control the properties of angular unit.

IAngularUnitEdit

Provides access to members that define the properties of an angular unit.

IArea

Provides access to members that return properties common to rings and polygons.

IArea3D

Provides access to members that return properties common to MultiPatches.

IAreaGeodetic

Provides access to members that calculate ellipsoidal area of polygons using various perimeter densification methods.

IBezierCurve

Provides access to members that identify third degree bezier curve segments and defines their properties.

IBezierCurve2

Provides access to members that identify third degree bezier curve segments and defines their properties.

IBezierCurve3

Provides access to members that identify third degree bezier curve segments and defines their properties.

IBezierCurveGEN

OLE automation compatibility interface for IBezierCurve.

IBufferConstruction

Provides access to members that buffer sets of geometries.

IBufferConstruction2

Provides access to members that buffer sets of geometries.

IBufferConstructionProperties

Provides access to members that control how sets of geometries are buffered.

IBufferConstructionProperties2

Provides access to members that control whether buffering is done on a plane or on an ellipsoid.

IBufferProgress

Implemented by clients to receive reports of buffer operation progress.

ICircularArc

Provides access to members that control properties of circular arcs.

IClassFactory
ICompareCoordinateSystems

Provides modified equality tests for spatial references.

ICompositeGeoTransformation

Provides access to members that control a set of geographic transformations.

IConstructAngle

Provides access to members that construct an angle using other geometries and measures. This interface is implemented by the GeometryEnvironment object.

IConstructBezierCurve

Provides access to members that construct a Bezier curve using other geometries and measures.

IConstructCircularArc

Provides access to members that construct a circular arc using other geometries and values.

IConstructCircularArc2

Provides access to members that construct a circular arc using other geometries and values.

IConstructCircularArc3

Provides access to members that construct a fillet using a point on the fillet.

IConstructClothoid

Methods for constructing clothoid spirals.

IConstructClothoid2

Methods for constructing clothoid spirals, that use true tangent instead of finite difference.

IConstructCurve

Provides access to members that construct a curve using other geometries and measures.

IConstructCurve2

Provides access to members that construct a curve using other geometries and measures.

IConstructCurve3

Provides access to members that construct a curve using other geometries and measures.

IConstructCurve4

Constructs an offset curve using a different algorithm.

IConstructDomainExtent

Provides access to members that construct domain extents based on defined precision.

IConstructDomainExtent2

Constructs a Z/M domain extent from the specified extent and information from a spatial reference.

IConstructEllipticArc

Provides access to members that construct an elliptic arc segment using other geometries and measures.

IConstructGeodetic

Provides access to members that construct various kinds of geodetic curves.

IConstructGeometryCollection

Provides access to members that construct a collection of geometries.

IConstructLine

Provides access to members that construct a line segment using other geometries and measures.

IConstructMerge

Methods for doing a 3-way merge using two modified versions of a geometry along with the original.

IConstructMultiPatch

Provides access to members that can be used to construct MultiPatches.

IConstructMultipoint

Provides access to members that construct multiple points using other geometries and values.

IConstructPath

Provides access to members that construct a path using other geometries and measures.

IConstructPoint

Provides access to members that construct a point using other geometries and measures.

IConstructPoint2

Provides access to additional point construction methods.

IConstructUnknownCoordinateSystem

Provides method to define the properties of an unknown coordinate system.

IControlPrecision

IControlPrecision interface.

IControlPrecision2

IControlPrecision2 interface.

IControlPrecision3

IControlPrecision3 interface.

IConversionMGRS

Provides access to members that allow the use of MGRS.

IConversionNotation

Provides access to functions that convert to and from various geographic string notations.

ICoordinateFrameTransformation

Provides access to members that control the 3D frame transformation with rotation, translation and scaling.

ICurve

Provides access to properties and methods of all 1 dimensional curves (polylines, segments, boundaries of polygons, etc.).

ICurve2

Provides access to members that extend the functionality of one dimensional curves.

ICurve3

Provides access to members that extend the functionality of one dimensional curves.

ICurve3D

Provides access to members that define operations common to curves with Zs.

IDatum

Provides access to members that control the properties of all horizontal datums.

IDatumEdit

Provides access to members that control the properties of a horizontal datum.

IDatumTransformationInfo

Provides common properties for GeoTransformation and HVCompositeDatumTransformation

IESRISegment
IESRISegment2
IESRIShape

Provides access to members that Import/Export ArcObjects geometries to Esri shapefile format.

IESRIShape2

Provides access to methods for non-byte swapping and angular densification export in addition to those in IESRIShape.

IESRISpatialReference

Provides access to members that control the import/export operations components of a spatial reference system. This interface is same as IESRISpatialReferenceGEN.

IESRISpatialReferenceGEN

Provides access to members that generate well known string (WKS) representations of spatial reference objects.

IESRISpatialReferenceGEN2

Provides access to members that generate well known string representations for spatial reference objects. The strings include authority metadata.

IESRISpatialReferenceGENEx

Provides access to members that generate well known string representations for spatial reference objects.

IEllipticArc

Provides access to members that control properties of elliptic arc segments.

IEncode3DProperties

Provides access to members that encode and decode normals and 2D texture coordinates into a single double value.

IEnumCurve

Provides access to members that allow efficient construction of sequential subcurves along a polyline or polygon.

IEnumCurve2

Provides access to members that extend IEnumCurve.

IEnumGeometry

Provides access to members that enumerate the members of a collection of geometries.

IEnumIntersection

Not currently used.

IEnumPointAndDistance

Provides access to members that iterate over the points on a geometry that are closest to an input point, as returned by QueryPointsAndDistances.

IEnumSegment

Provides access to members that iterate over collections of segments (obtained from the EnumSegments property on the ISegmentCollection interface).

IEnumSplitPoint

Provides access to members that iterate over the new vertices in a geometry introduced as a result of using SplitAtPoints/SplitAtDistances.

IEnumVertex

Provides access to members that iterate over the vertices or points of a geometry (see the EnumVertices property of the IPointCollection interface).

IEnumVertex2

Provides access to members that extend IEnumVertex.

IEnvelope

Provides access to methods and properties of envelopes.

IEnvelope2

Provides access to members that extend the IEnvelope interface.

IEnvelope3D

Provides access to methods on 3D envelopes.

IEnvelope4

Provides further access to methods on 3D envelopes.

IEnvelopeGEN

OLE Automation compatibility interface for IEnvelope.

IExtrude

Provides access to members that can be used to take a geometry and connect it to a translated version of itself to generate a higher-dimensional geometry.

IExtrude2

Provides access to members that can be used to take a geometry and connect it to a translated version of itself to generate a higher-dimensional geometry.

IFunctionalSurface

Provides access to information about the functional surface, generating heights given x,y locations. Also see IFunctionalSurface2.

IFunctionalSurface2

Provides access to members that allow changes to be made to the interpolation domain, in addition to the IFunctionalSurface members.

IFunctionalSurface3

Provides access to members that allow fuller interpolation of polygonal patches.

IGeneralMultiPatchInfo

Interface to get infomation of a GeneralMultiPatch.

IGeneralMultiPatchInfo2

Interface to get information of a GeneralMultiPatch.

IGeoTransformation

Provides access to members that define a geographic (datum) transformation.

IGeoTransformationOperationSet

Provides access to members that control a set of geographic transformation operators (GT + direction).

IGeoTransformationOperationSet2

Provides access to members that control a set of geographic and vertical transformation operators.

IGeocentricTranslation

Provides access to members that control the 3D vector transformation with 3 translation values.

IGeodeticMeasurement

Provides access to members that perform measurements along geodetic lines between two points

IGeographic2DOffsetTransformation

Provides access to members that control the geographic 2D offset transformation.

IGeographicCoordinateSystem

Provides access to members that control access to all properties of geographic coordinate systems.

IGeographicCoordinateSystem2

Provides access to members that control additional properties and methods for all geographic coordinate systems.

IGeographicCoordinateSystemEdit

Provides access to members that control the properties for a geographic coordinate system.

IGeometricBufferSourceSink

Client-supplied interface that provides support for buffering a group of geometries by different distances.

IGeometricBufferSourceSink64

Client-supplied interface that provides support for buffering a group of geometries by different distances.

IGeometry

Provides access to members that describe properties and behavior of all geometric objects.

IGeometry2

Provides access to members that extend the IGeometry interface with a more sophisticated projection method.

IGeometry3

Provides rapid access to a geometry's extent in the x-y plane.

IGeometry4

Provides access to methods that indicate if a geometry has been changed (edited, projected, etc).

IGeometry5

Provides access to members that extend the IGeometry interface with a more sophisticated projection method.

IGeometryArray
IGeometryBag

Provides access to members that identify a geometry bag.

IGeometryBridge

Provides access to a set of generic methods that can be used in all languages supported.

IGeometryBridge2

Provides access to a set of generic methods that can be used in all languages supported.

IGeometryCollection

Provides access to members that can be used for accessing, adding and removing individual geometries of a multi-part geometry (Multipoint, Polyline, Polygon, MultiPatch, and GeometryBag).

IGeometryEnvironment

Provides access to members that control global geometry variables.

IGeometryEnvironment2

Provides access to members that control additional global geometry variables.

IGeometryEnvironment3

Provides access to members that control additional global geometry variables.

IGeometryEnvironment4

Provides access to members that control additional global geometry variables.

IGeometryFactory

Provides access to members that create geometries from different inputs.

IGeometryFactory2

Provides access to members that create geometries from different inputs.

IGeometryFactory3

Provides access to members that create geometries from different inputs.

IGeometryFactory4

Provides access to members that create geometries from different inputs.

IGeometryResourceDownloader

A callback interface that allows downloading of resources required for geometry.

IGeometryServer

Provides access to standard operations on geometric 'value' objects. The input geometries are never modified by these operations. Designed for use in building web services and web applications.

IGeometryServer2

Provides access to more standard operations on geometric 'value' objects. The input geometries are never modified by these operations. Designed for use in building web services or other kinds of distributed applications.

IGeometryServer3

Provides access to more standard operations on geometric 'value' objects. The input geometries are never modified by these operations. Designed for use in building web services or other kinds of distributed applications.

IGridTransformation

Provides access to members that control the dataset name for a grid-based transformation.

IHVCompositeDatumTransformation

Provides a combined Horizontal and Vertical transformation of Geographic Datum.

IHVCompositeDatumTransformationEditor
IHVDatum

Indicator interface for a horizontal or vertical.

IHVDatumTransformation

Provides a Horizontal and Vertical transformation of Geographic Datum.

IHitTest

Provides access to members that locate a part of a geometry closest to a point.

IHitTest3D

Provides access to members that locate a part of a geometry closest to a point.

IJSONConverterGeometry

Provides direct access to the geometry serialization for AMF and JSON formats.

IJSONConverterGeometry2

Provides direct access to the Units serialization.

ILine

Provides access to members that identify a straight line segment and defines its properties.

ILine2

Provides access to the coordinates of a line segment in the form of Well Known Structures (WKS).

ILine3

Provides access to members that identify a straight line segment and defines its properties.

ILinePolygonHelper

Helper class for polygons, formed from linear segments.

ILinearUnit

Provides access to members that control the properties of the linear unit.

ILinearUnitEdit

Provides access to members that control the properties of the linear unit.

ILocalCoordinateSystem

Provides access to members that control the properties and methods for local coordinate systems.

ILongitudeRotationTransformation

Provides access to members that control the parameters of a longitude-rotation transformation.

IMAware

Indicator interface that identifies geometric objects that can have persistent M values attached to their vertices.

IMCollection

Provides access to members that control operations on M-aware multipoints, polylines, polygons and multipatches.

IMSegmentation

Provides access to members for defining an M-based linear coordinate system on a polyline or polygon.

IMSegmentation2

Provides access to additional linear referencing operations on polylines.

IMSegmentation3

Provides access to additional linear referencing operations on polylines.

IMSegmentation4

Provides access to additional linear referencing operations on polylines.

IMSegmentationInternal

Provides access to members that allow certain MSegmentation functionality, similar to that on IMSegmentation3 but more limited.

IMSnap

Provides access to a method that snaps ms of the geometry to the precision of the spatial reference associated with the geometry.

IMolodenskyBadekasTransformation

Provides access to members that control the 3D frame transformation with rotation, translation, scaling, and XYZ center of rotation.

IMolodenskyTransformation

Provides access to members that control the parameters of a Molodensky transformation.

IMultiPatch

Provides access to members that identify a MultiPatch and permit controlled access to its parts.

IMultiPatch2

Provides access to members that permit controlled access to MultiPatch parts.

IMultipoint

Indicator interface that identifies a multipoint object.

INetworkShape
INetworkShape3D
INormalAware

Indicator interface that identifies geometries that can have persistent normal vectors values attached to coordinates.

INullTransformation

indicator interface for a null transformation.

IPEObjectDeprecation

Provides information about projection object deprecation.

IPEWKTExport

Provides methods to export Projection Engine objects to string.

IPRJSpatialReference

Provides access to members that control the import/export operations components of a spatial reference system. IPRJSpatialReference is same as IPRJSpatialReferenceGEN.

IPRJSpatialReferenceGEN

Provides access to members that control the import/export operations components of a spatial reference system.

IParameter

Provides access to members that control the properties of projection parameters.

IParameterEdit

Provides access to members that control the properties of projection parameters.

IPartIDAware

Indicator interface that identifies geometries that can have part IDs.

IPath

Provides access to members that identify a path and define its behavior.

IPoint

Provides access to members that define two dimensional points.

IPointArray
IPointCollection

Provides access to members that manipulate the points of a Multipoint, Path, Ring, Polyline, Polygon, TriangleFan, TriangleStrip, or MultiPatch.

IPointCollection2

Provides access to members that manipulate the points of a Multipoint.

IPointCollection3

Provides access to members that manipulate the points of a Multipoint.

IPointCollection4

Provides access to members that manipulate the points of a Multipoint, Path, Ring, Polyline, Polygon, TriangleFan, TriangleStrip, or MultiPatch.

IPointCollection5

Provides access to members that manipulate the vertices as lightweight point+attribute structures (VA - vertex attribute)

IPointIDAware

Indicator interface that identifies geometries that can have persistent point ID values attached to coordinates.

IPolycurve

Provides access to members that define operations common to polylines and the boundaries of polygons.

IPolycurve2

Provides access to members that extend IPolycurve with additional splitting and densification methods.

IPolycurve3

Provides access to members that extend IPolycurve with additional splitting and densification methods.

IPolycurve3D

Provides access to members that define operations common to polycurves with Zs.

IPolycurve4

Provides geodesic operations on curves.

IPolycurveGeodetic

Provides various geodetic operations on curves.

IPolygon

Provides access to members that identify a polygon and permit controlled access to its inner and outer rings.

IPolygon2

Provides access to members that extend the IPolygon interface.

IPolygon3

Provides access to members that extend the IPolygon2 interface.

IPolygon4

Provides access to members that extend the IPolygon3 interface.

IPolygon5

Provides additional operations on polygons.

IPolygonArray

Provides access to the IPolygonArray Interface.

IPolyline

Provides access to members that identify and add behavior to a polyline object.

IPolyline2

Provides access to members that extend a polyline object.

IPolyline3

Provides access to members that extend a polyline object.

IPolyline4

Provides access to members that extend a polyline object.

IPolyline5

Provides access to members that extend a polyline object.

IPolyline6

Provides access to members that extend a polyline object.

IPolylineArray

Provides access to the IPolylineArray Interface.

IPositionVectorTransformation

Provides access to members that control the 3D vector transformation with rotation, translation and scaling.

IPrimeMeridian

Provides access to members that control the properties of all prime meridians.

IPrimeMeridianEdit

Provides access to members that control the properties of the prime meridian.

IProjectedCoordinateSystem

Provides access to members that control the properties and methods for all projected coordinate systems.

IProjectedCoordinateSystem2

Provides access to members that control additional properties and methods for projected coordinate systems.

IProjectedCoordinateSystem3

Provides access to members that control additional properties and methods for projected coordinate systems.

IProjectedCoordinateSystem4

Provides access to members that control additional properties and methods for projected coordinate systems.

IProjectedCoordinateSystem4GEN

Provides access to members that control additional properties and methods for projected coordinate systems. IProjectedCoordinateSystem4GEN is generic version of IProjectedCoordinateSystem4.

IProjectedCoordinateSystem5

Provides access to members that control additional properties and methods for projected coordinate systems.

IProjectedCoordinateSystemEdit

Provides access to members that control the properties of a projected coordinate system.

IProjection

Provides access to members that control the properties of all map projections.

IProjectionGEN

OLE compatibility for providing access to members that control the properties of all map projections.

IProjectiveTransformation2D

Provides access to members that define and manipulate projective transformations.

IProjectiveTransformation2DGEN

Provides access to members that define and manipulate projective transformations. IProjectiveTransformation2DGEN is generic version of IProjectiveTransformation.

IProximityOperator

Provides access to members that find the 2D distance between two geometries.

IProximityOperator3D

Provides access to members that find the 3D distance between two geometries with Zs.

IRay

Provides access to 3D Ray properties and methods. A ray has one endpoint (its origin) and continues infinitely in one direction.

IRay2

Provides access to 3D Ray properties and methods. A ray has one endpoint (its origin) and continues infinitely in one direction.

IRelationResult

Provides access to members that meet the specific relation between two sets of geometries. Not currently implemented for geometries containing elliptic arcs.

IRelationResult64

Provides access to members that meet the specific relation between two sets of geometries. Not currently implemented for geometries containing elliptic arcs.

IRelationResultArray
IRelationalOperator

Provides access to members that determine if a certain spatial relationship exists between two geometries.

IRelationalOperator2

Additional relational functions.

IRelationalOperator3D

Provides access to members that determine if a certain spatial relationship exists between two geometries with Zs.

IRelationalOperator3D2

Provides access to members that determine if a certain spatial relationship exists between two geometries with Zs.

IRelationalOperatorNxM

Provides access to members that determines which pairs of geometries from two sets are in a specified relation.

IRing

Provides access to members that identify a ring and define its behavior.

IRing2

Provides extended access to members that identify a ring and define its behavior.

ISRPersistStream

Provides access to methods for persisting precision information. Extends IPersistStream.

ISegment

Provides access to members that identify a segment. A segment is a way of getting between two endpoints.

ISegmentCollection

Provides access to members that manipulate the segments of a path, ring, polyline, or polygon.

ISegmentGraph

Provides access to members that define and navigate a topologically structured collection of segments.

ISegmentGraph2

Provides access to members that define and navigate a topologically structured collection of segments.

ISegmentGraphCursor

Provides access to members that define and manipulate a way of navigating over segments topologically structured within a segment graph.

ISegmentID

Provides access to members that allow simple manipulations of IDs at the segment level.

ISegmentM

Provides access to members that allow simple manipulations of Ms at the segment level.

ISegmentZ

Provides access to members that allow simple manipulations of Zs at the segment level.

ISegmentZ2

Provides access to members that allow manipulations of segments with Zs.

ISpatialIndex

Provides access to members that create a temporary spatial index for improving performance of "Disjoint" and some other relational operators.

ISpatialIndex2

Provides access to members that create a temporary spatial index for improving performance of "Disjoint" and some other relational operators.

ISpatialReference

Provides access to members that control a SpatialReference.

ISpatialReference2

Provides access to additional members that control a SpatialReference.

ISpatialReference2GEN

Provides access to additional members that control a SpatialReference. ISpatialReference2GEN is generic version of ISpatialReference.

ISpatialReference3

Provides access to additional members that associate a spatial reference with a vertical coordinate system.

ISpatialReference4

Provides access to additional members that control a SpatialReference.

ISpatialReferenceAuthority

Provides access to the authority-related metadata for a spatial reference object.

ISpatialReferenceFactory

Provides access to members that create different kinds of spatial reference components.

ISpatialReferenceFactory2

Provides access to members that create different kinds of spatial reference components.

ISpatialReferenceFactory3

Provides access to members that create vertical datums or coordinate systems.

ISpatialReferenceFactory4

Provides access to members that create lists of coordinate systems.

ISpatialReferenceFactory5

Provides access to members that control the geographic transformations fallback mechanism.

ISpatialReferenceFactory6

Provides access to members that control the geographic transformations fallback mechanism.

ISpatialReferenceInfo

Provides access to members that control the properties common to all components of a spatial reference system.

ISpatialReferenceResolution

Provides access to members that control the resolution of a spatial reference.

ISpatialReferenceSingletonManager

Ensure that no duplicates of projection engine pcs or gcs objects are created.

ISpatialReferenceTolerance

Provides access to members that specify the spatial and M tolerances of a spatial reference.

ISphere

Provides access to a sphere's properties and operations.

ISpheroid

Provides access to members that control the properties of all spheroids.

ISpheroidEdit

Provides access to members that control the properties of a spheroid.

ITextureAware

Indicator interface that identifies geometries that can have persistent texture values attached to coordinates.

ITexturePersistenceProperties

Provides access to MultiPatch texture persistence properties.

ITopologicalOperator

Provides access to members for constructing new geometries based upon topological relationships between existing geometries.

ITopologicalOperator2

Provides access to members that extend the ITopologicalOperator interface.

ITopologicalOperator3

Provides additional information on non-simple geometries.

ITopologicalOperator4

Provides additional information on non-simple geometries.

ITopologicalOperator5

Provides additional information on non-simple geometries.

ITopologicalOperator6

.

ITopologicalSegment

Provides access to members that identify segments that can participate in topological operations (intersect, etc).

ITopologicalSegment2

Provides access to members that extend the ITopologicalSegment interface.

ITransform2D

Provides access to methods for transforming geometries using either specific parameters or arbitrary transformation objects (affine transformations, geographic transformations, etc.).

ITransform3D

Provides access to methods for transforming 3D geometries using either specific parameters or arbitrary transformation objects.

ITransformation

Provides access to members that apply a function (or its inverse) to a set of points or measures. The suffix of each method indicates the type of parameters operated on.

ITransformation3D

Provides access to members that control a 3D affine transformation.

ITransformation3DGEN

Provides access to members that control a 3D affine transformation. ITransformation3DGEN is generic version of ITransformation3D.

ITransformationGEN

Provides access to members that apply a function (or its inverse) to a set of points or measures. The suffix of each method indicates the type of parameters operated on. ITransformationGEN is generic version of ITransformation.

ITriangleFan

Indicator interface that identifies a triangle fan.

ITriangleStrip

Indicator interface that identifies a triangle strip.

ITriangles

Indicator interface that identifies a Triangles patch.

IUnit

Provides access to members that identify a linear or angular unit of measure within a spatial reference system.

IUnitChangeTransformation

indicator interface for a unit change geotransformation (units are obtained from the constituent gcss.

IUnknownCoordinateSystem

Indicator interface that identifies an Unknown coordinate system.

IVector

Provides access to vector properties and operations.

IVector3D

Provides access to 3D vector properties and operations.

IVertexAttribute

Identifies geometries that can have attributes on their vertices.

IVertexAttribute2

additional operations for geometries that can have attributes (z, m, id) on their vertices.

IVerticalCoordinateSystem

Provides access to properties of a vertical coordinate system.

IVerticalCoordinateSystemEdit

Provides access to members that control the properties of a vertical coordinate system.

IVerticalCoordinateSystemGEN

Provides access to properties of a vertical coordinate system.

IVerticalDatum

Indicator interface for vertical datums.

IVerticalDatumEdit

Provides access to members that control the properties of a vertical datum.

IVolume

Provides access to members that return properties common to MultiPatches.

IWin32Shape

Provides access to members that prepare a set of GDI drawing instructions for a geometry.

IWin32Shape2

Provides access to members that prepare a set of GDI drawing instructions for a geometry.

IWkb

Reads/Writes the OGIS OLE/COM simple features Well Known Binary Format, v1.1, little-endian (NDR).

IZ

Provides access to members that identify geometric objects that can have 3D coordinates and defines operations on such objects.

IZ2

Provides access to additional members that identify geometric objects that can have 3D coordinates and defines operations on such objects.

IZAware

Indicator interface that identifies geometries that can have persistent Z values attached to their vertices.

IZCollection

Provides access to operations on Z-aware geometries.

IZShift

Provides access to a limited 3D awareness for a 2D affine transformation.

JSONConverterGeometry
Line

A 2D straight line between a pair of 2D endpoints; can optionally have height, measure and ID attributes at each endpoint.

LinePolygonHelper

Helper class for processing of polygons consisting of rings formed from linear segments

LinearUnit

Creates a linear unit of measure.

LongitudeRotationTransformation

Creates a longitude rotation transformation.

MolodenskyBadekasPositionVectorTransformation

Creates a Molodensky-Badekas Position Vector transformation.

MolodenskyBadekasTransformation

Creates a Molodensky-Badekas transformation.

MolodenskyTransformation

Creates a Molodensky transformation.

MultiPatch

A collection of surface patches.

Multipoint

An ordered collection of points; optionally has measure, height and ID attributes.

NADCON5Transformation

Creates a NADCON5-based transformation.

NADCONTransformation

Creates a NADCON-based transformation.

NTv2Transformation

Creates a NTv2-based transformation.

NTv2VelocityTransformation

Creates NTv2 Velocity transformation.

NullTransformation

Creates a null geographic transformation.

Parameter

Creates a parameter.

Path

A sequence of connected segments.

Point

A two dimensional point, optionally with measure, height, and ID attributes.

PointArray
Polygon

A collection of rings ordered by their containment relationship; optionally has measure, height and ID attributes.

PolygonArray

A collection of Polygon objects.

Polyline

An ordered collection of paths; optionally has measure, height and ID attributes.

PolylineArray

A collection of Polyline objects.

PositionVectorTransformation

Creates a Position Vector transformation.

PrimeMeridian

Creates a prime meridian.

ProjectedCoordinateSystem

Creates a projected coordinate system.

Projection

Creates a map projection.

ProjectiveTransformation2D

A two dimensional projective transformation.

Ray

A 3D ray that begins at a point and extends infinitely along a line in one direction only.

RelationResult

The indexes of geometrybag elements that are in a specified relation.

RelationResultArray
Ring

An area bounded by one, closed sequence of connected segments; optionally has measure, height and ID attributes at each vertex.

SegmentGraph

A topologically structured collection of segments.

SpatialReferenceEnvironment

Creates various spatial reference objects.

Sphere

A complete sphere.

Spheroid

Creates a spheroid.

TexturePersistenceProperties

Texture Persistence properties object.

TriangleFan

A continuous 3D fan of triangles, where each triangle after the first shares an edge with the preceding triangle, and all triangles share a common pivot point.

TriangleStrip

A continuous 3D strip of triangles, where each triangle after the first shares an edge with the preceding triangle.

Triangles

A collection of 3D triangles, where each consecutive triplet of vertices defines a new triangle

UnitChangeTransformation

Creates a unit change transformation.

UnknownCoordinateSystem

Creates an unknown coordinate system.

Vector3D

A 3D vector containing dx, dy, and dz components.

VerticalCoordinateSystem

Creates a vertical coordinate system.

VerticalDatum

Creates a vertical datum.

Enums

SegmentOverlapEnum

Describes the overlap between segments.

esriArcOrientation

Describes how to rotate about the arc's center getting from the 'from' point to the 'to' point of an arc.

esriBufferConstructionEndEnum

Line end (cap) buffering options for IBufferConstruction methods

esriBufferConstructionSideEnum

Line side buffering options for IBufferConstruction methods

esriConstructDivideEnum

Defines the kind of geometries produced by a ConstructDivide operation.

esriConstructOffsetEnum

Options for offset behavior at polycurve segment intersection corners.

esriConstructOffsetSimplifyEnum

method for removing self-intersecting loops from offset curves (used by IConstructCurve4::ConstructOffset.

esriCoordinateSystemFilter

A filter for lists of coordinate systems.

esriCurveDensifyMethod

The different ways of producing a piecewise linear approximation to a curve.

esriCurveExtension

Describes the options to be used when extending a polyline. See the IConstructCurve::ConstructExtended method.

esriCurveIteratorEnum

Identifies different stop options for an IEnumCurve iterator.

esriEnvelopeVertex

The "indexes" of the corners of an envelope. This enumeration can be used to interpret the hitSegmentIndex parameter of the IHitTest::HitTest method when hit testing against an envelope.

esriExtrapolationEnum

Options for M extrapolation (IMSegmentation::ExtrapolateMs).

esriGARSModeEnum

Determines the format of the GARS (global area reference system) description of a point.

esriGeodeticType

Describes the kinds of geodetic curves that can be constructed.

esriGeometryAttributes

The set of attributes that a geometry can have.

esriGeometryDimension

The topological dimension of a geometry.

esriGeometryEmbeddingDimension

The topological dimension of the space embedding the geometry.

esriGeometryError

Describes why a parameter to a method is incorrect, or why a method could not be completed.

esriGeometryHitPartType

Describes the parts of a geometry that can be located by their proximity to a query point. Specified as a parameter to the HitTest method.

esriGeometryServerMessageCodeEnum

Identifies messages that can be logged by the Geometry Server.

esriGeometrySuccess

Success codes returned by some methods.

esriGeometryType

The available kinds of geometry objects.

esriGeometryUpdateMEnum

Describes how Ms should be updated by IMSegmentation2 methods.

esriMCurveRelationEnum

Information about where an M value falls relative to a curve (IMSegmentation2::GetSubcurveBetweenMsEx).

esriMGRSModeEnum

Determines the format of the MGRS description of a point.

esriMMonotonicEnum

Describes if the measures on the geometry are all ascending, all descending, or neither.

esriMonotinicityEnum

Describes trends in the value of an attribute.

esriMultiPatchRingType

MultiPatch Ring Types.

esriNonSimpleReasonEnum

Describes ways in which a geometry could be non-simple.

esriPEWKTMode

Flags of the mask to pass to the WKT string in IPEWKTExport.

esriPatchType

The kinds of surface patches that can be contained in a MultiPatch.

esriProjectionHint

Describes the type of extent hints used by Project5 and ProjectEx5.

esriSRDatum2Type

More available datums.

esriSRDatum3Type

More available datums.

esriSRDatumType

The available datums.

esriSRGeoCS2Type

More geographic coordinate systems.

esriSRGeoCS3Type

More available geographic coordinate systems.

esriSRGeoCSType

The available geographic coordinate systems.

esriSRGeoTransformation2Type

More datum transformations: longitude rotation, NADCON, HARN and NTv2 methods.

esriSRGeoTransformation3Type

More available geographic/datum transformations.

esriSRGeoTransformationType

The available equation-based datum transformations.

esriSRHorizonType

Describes the type of horizon geometries generated by the Esri Projection Engine.

esriSRLimitsEnum

The largest number of parameters that a projection or projected coordinate system can have.

esriSRParameter2Type

More predefined parameters.

esriSRParameter3Type

More predefined parameters.

esriSRParameter4Type

More predefined parameters.

esriSRParameterType

The available predefined parameters.

esriSRPoleGeometry

Describes the geometry of a pole in a projected coordinate system.

esriSRPoleLocation

Describes the location of a pole with respect to the PCS horizon.

esriSRPrimeM2Type

More available prime meridians.

esriSRPrimeMType

The available prime meridians.

esriSRProjCS2Type

More projected coordinate systems.

esriSRProjCS3Type

More projected coordinate systems.

esriSRProjCS4Type

More available projected coordinate systems.

esriSRProjCSType

The available projected coordinate systems.

esriSRProjection2Type

More map projections.

esriSRProjection3Type

More map projections.

esriSRProjection4Type

More available map projections.

esriSRProjectionType

The available map projections.

esriSRSpheroid2Type

More available spheroids and spheres.

esriSRSpheroidType

The available spheroids and spheres.

esriSRToleranceEnum

Describes the ways a spatial reference tolerance value can be incorrect.

esriSRUnit2Type

More available units of measure.

esriSRUnitType

The available units of measure.

esriSRVerticalCSType

The available vertical coordinate systems.

esriSRVerticalDatumType

The available vertical datums.

esriSegmentExtension

Describes if, how, and where to extend segments.

esriSegmentType

The types of segments that can be persisted in a new style Esri shapefile buffer (a polyline/polygon with Esri shape type esriShapeGeneralPolyline/Polygon.

esriShapeExportFlags

Flags used to control the behavior of IESRIShape2 export methods.

esriShapeImportFlags

Flags used to control the behavior of IESRIShape2 import methods.

esriShapeModifiers

Bits that can be added to the esriGeneral... shape types.

esriShapeType

Esri Shapefile shape types. Refer to the Esri Shapefile whitepaper for details. The ...General... types listed below are currently not public and not supported in shapefiles.

esriSpatialReferenceError

Describes why a parameter to a method is incorrect, or why a method could not be completed.

esriSpatialRelationEnum

Spatial relationship types - includes those defined by the OpenGIS Simple Features Specification For OLE/COM, Revision 1.1

esriSpatialRelationExEnum

Spatial relationship types used by WithinEx and ContainEx specifying details of the relationships

esriTransformDirection

Specifies whether to apply a forward or reverse (inverse) transformation.

esriTurnDirectionEnum

The way in which a turn can be made when walking from one segment to another segment connected to it. The 'to' point of the first must be the same as the 'from' point of the second.

esriUTMConversionOptionsEnum

Specifies options for converting UTM coordinate strings to and from geographic coordinates

wkbByteOrder

The network byte order chosen for an OGIS OLE/COM Well Known Binary buffer (v1.1).

wkbGeometryType

Well-known binary (Wkb) Geometry Types.