Interface IProjectedCoordinateSystem4GEN
Provides access to members that control additional properties and methods for projected coordinate systems. IProjectedCoordinateSystem4GEN is generic version of IProjectedCoordinateSystem4.
[InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
[Guid("D44EDB15-8866-4641-872D-3C81F73AC8AA")]
public interface IProjectedCoordinateSystem4GEN
Properties
Abbreviation
The abbreviated name of this spatial reference component.
string Abbreviation { get; }
Property Value
Alias
The alias of this spatial reference component.
string Alias { get; }
Property Value
Azimuth
The azimuth of a projected coordinate system.
double Azimuth { get; set; }
Property Value
CentralMeridian[bool]
The central meridian (Lambda0) of a projected coordinate system.
double CentralMeridian[bool inDegrees] { get; set; }
Parameters
inDegreesbool
Property Value
CentralParallel
The central parallel (Phi 0) of a projected coordinate system.
double CentralParallel { get; set; }
Property Value
CoordinateUnit
The linear unit of a projected coordinate system.
ILinearUnit CoordinateUnit { get; }
Property Value
FactoryCode
The factory code of the spatial reference.
int FactoryCode { get; }
Property Value
Remarks
The factory code is an integer identifier that is unique by projection engine object type, such as a projected coordinate system. You can use a factory code in the ISpatialReferenceFactory::CreateProjectedCoordinateSystem method. If you create a custom projected coordinate system, the factory code is zero.
FalseEasting
The false easting (X0) of a projected coordinate system.
double FalseEasting { get; set; }
Property Value
FalseNorthing
The false northing (Y0) of a projected coordinate system.
double FalseNorthing { get; set; }
Property Value
GeographicCoordinateSystem
The geographic coordinate system of a projected coordinate system.
IGeographicCoordinateSystem GeographicCoordinateSystem { get; }
Property Value
Remarks
<P>The <STRONG>IClone::IsIdentical</STRONG> method is not implemented. </P>
Height
The height above the sphere in projected coordinate system units.
double Height { get; set; }
Property Value
Horizon[int]
The mathematical limits of a projected coordinate system.
IntPtr Horizon[int horizonIndex] { get; }
Parameters
horizonIndexint
Property Value
Remarks
Obsolete. Use IProjectedCoordinateSystem2::GetHorizon.
HorizonCount
The number of shapes that describe the limits of a ProjCS.
int HorizonCount { get; }
Property Value
Remarks
Obsolete. Use IProjectedCoordinateSystem2::GetHorizon.
LatitudeOf1st
The latitude of the first point (Phi 1) of a projected coordinate system.
double LatitudeOf1st { get; set; }
Property Value
LatitudeOf2nd
The latitude of the second point (Phi 2) of a projected coordinate system.
double LatitudeOf2nd { get; set; }
Property Value
LatitudeOfCenter
The latitude of center (Phi C) of a projected coordinate system.
double LatitudeOfCenter { get; set; }
Property Value
LatitudeOfOrigin
The latitude of the origin (Phi 0) of a projected coordinate system.
double LatitudeOfOrigin { get; set; }
Property Value
LongitudeOf1st
The longitude of the first point (Lambda 1) of a projected coordinate system.
double LongitudeOf1st { get; set; }
Property Value
LongitudeOf2nd
The longitude of the second point (Lambda 2) of a projected coordinate system.
double LongitudeOf2nd { get; set; }
Property Value
LongitudeOfCenter
The longitude of center (Lam C) of a projected coordinate system.
double LongitudeOfCenter { get; set; }
Property Value
LongitudeOfOrigin
The longitude of origin (Lambda0) of a projected coordinate system.
double LongitudeOfOrigin { get; set; }
Property Value
Name
The name of this spatial reference component.
string Name { get; }
Property Value
PrecisionExImpl
An opaque reference to the precision information (including z/m awareness) implementation for this spatial reference.
long PrecisionExImpl { get; }
Property Value
PrecisionImpl
An opaque reference to the precision information implementation for this spatial reference.
long PrecisionImpl { get; }
Property Value
Projection
The map projection of a projected coordinate system.
IProjection Projection { get; }
Property Value
Remarks
<P>A Projection object encapsulates the mathematics needed to convert geographic coordinates between two different coordinate systems. A projection is a component of a projected coordinate system and is not usually used directly. Rather, a projected cooordinate system is defined and used to project cooordinates.</P>
PseudoStandardParallel1
The latitude on an oblique spheroid that defines the oblique cone for a Krovak projected coordinate system.
double PseudoStandardParallel1 { get; set; }
Property Value
Remarks
The comment string of this spatial reference component.
string Remarks { get; }
Property Value
Rotation
The rotation value used to change the axis directions in a Krovak projected coordinate system.
double Rotation { get; set; }
Property Value
ScaleFactor
The scale factor (K0) of a projected coordinate system.
double ScaleFactor { get; set; }
Property Value
SpatialReferenceImpl
SpatialReferenceImpl.
long SpatialReferenceImpl { get; }
Property Value
StandardParallel1
The first parallel (Phi 1) of a projected coordinate system.
double StandardParallel1 { get; set; }
Property Value
StandardParallel2
The second parallel (Phi 2) of a projected coordinate system.
double StandardParallel2 { get; set; }
Property Value
Usage
The usage notes of a projected coordinate system.
string Usage { get; }
Property Value
XScaleFactor
The X axis scale value used to flip the axis direction in a Krovak projected coordinate system.
double XScaleFactor { get; set; }
Property Value
YScaleFactor
The Y axis scale value used to flip the axis direction in a Krovak projected coordinate system.
double YScaleFactor { get; set; }
Property Value
ZCoordinateUnit
The unit for the Z coordinate.
ILinearUnit ZCoordinateUnit { get; set; }
Property Value
Methods
Changed()
Notify this object that some of its parts have changed (parameter values, z unit, etc.).
void Changed()
Forward(ref WKSPoint[])
Projects points from geographic to planar coordinates.
void Forward(ref WKSPoint[] Points)
Parameters
PointsWKSPoint[]
GetCentralLongitude()
Returns CentralLongitude of the projected coordinate system. Always defined, unlike CentralMeridian or LongitudeOfCenter.
double GetCentralLongitude()
Returns
GetDomain(ref double, ref double, ref double, ref double)
Get the domain extent.
void GetDomain(ref double XMin, ref double XMax, ref double YMin, ref double YMax)
Parameters
GetFalseOriginAndUnits(ref double, ref double, ref double)
Get the false origin and units.
void GetFalseOriginAndUnits(ref double falseX, ref double falseY, ref double xyUnits)
Parameters
GetGCSParams(out double, out double)
Returns 180 degrees and horizon delta in proper GCS units.
void GetGCSParams(out double p_180, out double pDelta)
Parameters
GetHorizon(out WKSEnvelope, out bool)
Returns the standard horizon polygon, its envelope, and whether it is inclusive or exclusive; the horizon polygon may be 0.
IGeometry GetHorizon(out WKSEnvelope horizonEnvelope, out bool Inclusive)
Parameters
horizonEnvelopeWKSEnvelopeInclusivebool
Returns
Remarks
GetHorizon returns, in geographic coordinate system coordinates and unit of measure, the valid geometry of a projected coordinate system. The method also returns whether the geometry should be considered inclusive or exclusive, and its envelope.
GetMDomain(ref double, ref double)
Get the measure domain extent.
void GetMDomain(ref double outMMin, ref double outMMax)
Parameters
GetMFalseOriginAndUnits(ref double, ref double)
Get the measure false origin and units.
void GetMFalseOriginAndUnits(ref double falseM, ref double mUnits)
Parameters
GetNorthPole()
Returns north pole in projected coordinates, or an empty point if north pole is outside the PCS horizon.
WKSPoint GetNorthPole()
Returns
GetNorthPoleGeometry()
Returns type of north pole geometry.
esriSRPoleGeometry GetNorthPoleGeometry()
Returns
GetNorthPoleLocation()
Returns type of location of north pole with respect to PCS horizon.
esriSRPoleLocation GetNorthPoleLocation()
Returns
GetPCSHorizon(ref WKSEnvelope, ref bool)
Returns PCS horizon polygon, its envelope and whether it is inclusive or exclusive; the horizon polygon may be 0.
IGeometry GetPCSHorizon(ref WKSEnvelope horizonEnvelope, ref bool Inclusive)
Parameters
horizonEnvelopeWKSEnvelopeInclusivebool
Returns
GetParameters(ref IParameter[])
Gets the map projection parameters of a projected coordinate system. The array size needs to be esriSR_MaxParameterCountPrivate.
void GetParameters(ref IParameter[] parameters)
Parameters
parametersIParameter[]
GetShiftedHorizon(int)
Returns the horizon polygon, shifted once or twice, west/east of standard horizon for a negative/positive shift.
IGeometry GetShiftedHorizon(int shift)
Parameters
shiftint
Returns
Remarks
The standard horizon is the valid area of a projected coordinate system, but in geographic coordinate system coordinates and unit of measure. The standard horizon usually has longitude values between +/-180 (or equivalent). If you use -2, -1, 1 or 2 for the shift value, GetShiftedHorizon will translate the horizon by 360 degrees to the left or right.
GetSouthPole()
Returns south pole in projected coordinates, or an empty point if south pole is outside the PCS horizon.
WKSPoint GetSouthPole()
Returns
GetSouthPoleGeometry()
Returns type of south pole geometry.
esriSRPoleGeometry GetSouthPoleGeometry()
Returns
GetSouthPoleLocation()
Returns type of location of south pole with respect to PCS horizon.
esriSRPoleLocation GetSouthPoleLocation()
Returns
GetZDomain(ref double, ref double)
Get the Z domain extent.
void GetZDomain(ref double outZMin, ref double outZMax)
Parameters
GetZFalseOriginAndUnits(ref double, ref double)
Get the Z false origin and units.
void GetZFalseOriginAndUnits(ref double falseZ, ref double zUnits)
Parameters
HasMPrecision()
Returns true when m-value precision information has been defined.
bool HasMPrecision()
Returns
HasXYPrecision()
Returns true when (x,y) precision information has been defined.
bool HasXYPrecision()
Returns
HasZPrecision()
Returns true when z-value precision information has been defined.
bool HasZPrecision()
Returns
Inverse(ref WKSPoint[])
Projects points from planar to geographic coordinates.
void Inverse(ref WKSPoint[] Points)
Parameters
PointsWKSPoint[]
InverseWithShift(double, ref WKSPoint[])
Projects points from planar to geographic coordinates. Deals with geographic coordinates in ranges other than +-180.
void InverseWithShift(double shift, ref WKSPoint[] Points)
Parameters
IsEqualNoNames(IProjectedCoordinateSystem)
Compares two projected coordinate systems for equality but ignores their names.
bool IsEqualNoNames(IProjectedCoordinateSystem pOther)
Parameters
pOtherIProjectedCoordinateSystem
Returns
IsHorizonConvexHull()
Returns true if PCS horizon is convex.
bool IsHorizonConvexHull()
Returns
Remarks
The PCS horizon is the valid area of a projected coordinate system, in the units of the PCS.
IsHorizonEdgeDuplicated()
Returns true if some edges of PCS horizon project inversely to identical lines.
bool IsHorizonEdgeDuplicated()
Returns
Remarks
The PCS horizon is the valid area of a projected coordinate system, in the units of the PCS.
IsHorizonEntireWorld()
Returns true if PCS horizon contains the entire world.
bool IsHorizonEntireWorld()
Returns
Remarks
The PCS horizon is the valid area of a projected coordinate system, in the units of the PCS.
IsPrecisionEqual(ISpatialReference, ref bool)
Returns TRUE when the precision information for the two spatial references is the same.
void IsPrecisionEqual(ISpatialReference otherSR, ref bool IsPrecisionEqual)
Parameters
otherSRISpatialReferenceIsPrecisionEqualbool
PutLinearAndAngularUnits(ILinearUnit, IAngularUnit)
Modify linear unit of projected coordinates and angular unit of associated geographic coordinates.
void PutLinearAndAngularUnits(ILinearUnit LinearUnit, IAngularUnit AngularUnit)
Parameters
LinearUnitILinearUnitAngularUnitIAngularUnit
SetDomain(double, double, double, double)
Set the xy domain extent.
void SetDomain(double XMin, double XMax, double YMin, double YMax)
Parameters
SetFalseOriginAndUnits(double, double, double)
Set the false origin and units.
void SetFalseOriginAndUnits(double falseX, double falseY, double xyUnits)
Parameters
SetMDomain(double, double)
Set the measure domain extent.
void SetMDomain(double inMMin, double inMMax)
Parameters
SetMFalseOriginAndUnits(double, double)
Set the measure false origin and units.
void SetMFalseOriginAndUnits(double falseM, double mUnits)
Parameters
SetZDomain(double, double)
Set the z domain extent.
void SetZDomain(double inZMin, double inZMax)
Parameters
SetZFalseOriginAndUnits(double, double)
Set the Z false origin and units.
void SetZFalseOriginAndUnits(double falseZ, double zUnits)