Enum esriGeometryError
Describes why a parameter to a method is incorrect, or why a method could not be completed.
[Guid("84485021-9284-11D1-B987-080009EE4E51")]
public enum esriGeometryError
Fields
E_GEOMETRY_AMBIGUOUSPARTTYPE = 3258832588: (0x80047F4c) The operation would result in the creation of a new part, but the type of part to be created was ambiguous.
E_GEOMETRY_AUTHORITY_TOO_LONG = 3262032620: (0x80047F6c) The authority parameter is too long.
E_GEOMETRY_BADRELATION = 3256232562: (0x80047F32) The Relate operator couldn't evalute the specified relation expression.
E_GEOMETRY_BAD_SPLIT_DISTANCE = 3254032540: (0x80047F1c) The specified splitting distance is not included in the curve to be split.
E_GEOMETRY_BEZIER_EXTEND_EMBEDDED = 3257932579: (0x80047F43) ExtendEmbedded not implemented for Bezier curves.
E_GEOMETRY_BUFFERCONSTRUCTION_INUSE = 3261432614: (0x80047F66) A client has attempted to re-enter a BufferConstruction object while its ConstructBuffers... operation method executing.
E_GEOMETRY_BUFFERFAILURE = 3261532615: (0x80047F67) An error occurred during the buffer operation.
E_GEOMETRY_BUFFEROUTOFBOUNDS = 3257132571: (0x80047F3b) The buffer coordinates are out of bounds.
E_GEOMETRY_BUFFER_DISTANCES = 3261032610: (0x80047F62) There was a problem obtaining a distance at which to buffer a geometry.
E_GEOMETRY_BUFFER_DISTANCE_ZERO = 3263832638: (0x80047F7e) Cannot buffer a geometry with a distance of zero.
E_GEOMETRY_BUFFER_INVALID_BUFFER_DISTANCE = 3261932619: (0x80047F6b) The buffer distance must be a valid floating point number.
E_GEOMETRY_BUFFER_INVALID_END_OPTION = 3261832618: (0x80047F6a) The end option used by the BufferConstruction service must be one of: esriBufferFlat, esriBufferRound.
E_GEOMETRY_BUFFER_INVALID_SIDE_OPTION = 3261732617: (0x80047F69) The side option used by the BufferConstruction service must be one of: esriBufferLeft, esriBufferRight, esriBufferFull.
E_GEOMETRY_BUFFER_INVOLVES_BOTH_POLES = 3263232632: (0x80047F78) A buffer cannot currently cover both poles.
E_GEOMETRY_BUFFER_NEGATIVE_DISTANCE = 3263632636: (0x80047F7c) Cannot buffer points or polyines by a negative distance.
E_GEOMETRY_CANNOT_DO_3D_OPERATIONS_ON_CURVES = 3262632626: (0x80047F72) Cannot do 3D operations on curve segments.
E_GEOMETRY_CANNOT_EXTRAPOLATE_BY_SEGMENT = 3260732607: (0x80047F5f) No segment available to determine extrapolation ratio.
E_GEOMETRY_CANT_CUT_POLYGON = 3256132561: (0x80047F31) A cut operation could not classify all parts of the polygon as being left or right of the cutting polyline.
E_GEOMETRY_CANT_EVALUATE_RELATION_MATRIX = 3262832628: (0x80047F74) Some combinations of geometries with vertical segments cannot be evaluated with a 9DEM relational expression.
E_GEOMETRY_CANT_QUERY_ON_VERTEX_ATTRIBUTES = 3254932549: (0x80047F25) Not used.
E_GEOMETRY_CANT_RESHAPE = 3254232542: (0x80047F1e) Not used.
E_GEOMETRY_CONSTRUCTPOINTUNION = 3257832578: (0x80047F42) Can't use ConstructUnion on a point.
E_GEOMETRY_DEGENERATEGEOMETRY = 3259532595: (0x80047F53) The operation could not be performed because the geometry is degenerate.
E_GEOMETRY_DUPLICATESEGMENTPOINTER = 3259732597: (0x80047F55) The same segment has been added to the geometry more than once.
E_GEOMETRY_EDITED_REGIONS_OVERLAP = 3260532605: (0x80047F5d) Cannot merge the two geometries. The edited regions overlap.
E_GEOMETRY_EDITS_OVERLAP = 3260832608: (0x80047F60) Cannot merge the two geometries. The edits overlap.
E_GEOMETRY_EMPTYGEOMETRY = 3251432514: (0x80047F02) An operation on an empty geometry was attempted - for example, trying to move or rotate one.
E_GEOMETRY_EQUAL_VERTEX_ATTRIBUTES = 3254732547: (0x80047F23) Not used.
E_GEOMETRY_EXTERIORPART = 3259132591: (0x80047F4f) An interior part must be specified.
E_GEOMETRY_FILLET_FAILED = 3255932559: (0x80047F2f) The fillet could not be constructed according to specs.
E_GEOMETRY_GEODESIC_BUFFER_COORD_OUT_OF_RANGE = 3263332633: (0x80047F79) The input was outside a +-360 longitude range or outside +-90 latitude.
E_GEOMETRY_HAS_NL_SEGMENTS = 3256332563: (0x80047F33) A geometry being exported to an Esri shapefile buffer contains non-linear segments. Some data sources cannot store non linear segments.
E_GEOMETRY_ILLEGALWIN32EXPORT = 3257732577: (0x80047F41) Not used.
E_GEOMETRY_INCONSISTANT_DIMENSIONS = 3255332553: (0x80047F29) Input geometries do not have same dimensions.
E_GEOMETRY_INCONSISTANT_PARAMS = 3251532515: (0x80047F03) The input parameters could not be reasonably interpreted - for example, asking for the 2d result of a polyline/polygon intersection.
E_GEOMETRY_INCONSISTANT_SPATIAL_REFERENCE = 3253332533: (0x80047F15) Input geometries do not have same spatial reference.
E_GEOMETRY_INPUT_TYPE_INCORRECT = 3260432604: (0x80047F5c) The geometries must be polylines or polygons.
E_GEOMETRY_INPUT_TYPE_MISMATCH = 3260332603: (0x80047F5b) The geometries are not all of the same type.
E_GEOMETRY_INSUFFICIENT_CONTROLPOINTS = 3259832598: (0x80047F56) The number of control points is insufficient.
E_GEOMETRY_INTERIORPART = 3253732537: (0x80047F19) Not used.
E_GEOMETRY_INTERNALERROR = 3256932569: (0x80047F39) An internal error has occurred in the geometry system.
E_GEOMETRY_INVALIDCONSTRUCTION = 3258232582: (0x80047F46) Not used.
E_GEOMETRY_INVALIDCOUNT = 3259032590: (0x80047F4e) The number of items specified is too high or too low in the given context.
E_GEOMETRY_INVALIDRINGORDER = 3258932589: (0x80047F4d) The ordering of rings and types is invalid. (For example, an inner ring may not have an outer ring.)
E_GEOMETRY_INVALIDRINGTYPE = 3258732587: (0x80047F4b) The given ring is not of the required type within the multipatch. (For example an inner ring may be used where an outer ring is required.)
E_GEOMETRY_INVALIDTRIANGLESTYPE = 3263932639: (0x80047F7f) Triangles part of a multipatch is invalid (For example triangles part must have number of vertices divisible by 3).
E_GEOMETRY_INVALID_ANGLE = 3252532525: (0x80047F0d) An arc construction operation was given an invalid angle.
E_GEOMETRY_INVALID_AXES = 3256032560: (0x80047F30) An elliptic arc construction operation was given invalid axes.
E_GEOMETRY_INVALID_CHORD = 3251732517: (0x80047F05) An arc construction operation was given an invalid chord distance.
E_GEOMETRY_INVALID_RADIUS = 3251632516: (0x80047F04) An arc construction operation was given an invalid radius.
E_GEOMETRY_JSON_BAD_SHORTFORM_POINTS = 3263732637: (0x80047F7d) Cannot create points from short-form point array.
E_GEOMETRY_JSON_SYNTAX = 3263532635: (0x80047F7b) Syntax error in JSON geometry representation.
E_GEOMETRY_M_OUT_OF_BOUNDS = 3262532625: (0x80047F71) The m coordinates of this geometry are out of bounds.
E_GEOMETRY_NONENVELOPE = 3251832518: (0x80047F06) Not used.
E_GEOMETRY_NONGEOMETRY = 3254532545: (0x80047F21) Something other than a geometry was encountered.
E_GEOMETRY_NONMULTIPATCH = 3258532585: (0x80047F49) Something other than a multipatch was encountered.
E_GEOMETRY_NONPART = 3251932519: (0x80047F07) Not used.
E_GEOMETRY_NONPATH = 3252632526: (0x80047F0e) Not used.
E_GEOMETRY_NONPOINT = 3252832528: (0x80047F10) Something other than a point was added to a multipoint.
E_GEOMETRY_NONPOLYGON = 3254332543: (0x80047F1f) Something other than a polygon was encountered.
E_GEOMETRY_NONPOLYLINE = 3254432544: (0x80047F20) Something other than a polyline was encountered.
E_GEOMETRY_NONSEGMENT = 3252732527: (0x80047F0f) Not used.
E_GEOMETRY_NONTRIANGLEFAN = 3259332593: (0x80047F51) The input interface does not belong to a triangle fan object.
E_GEOMETRY_NONTRIANGLESTRIP = 3259232592: (0x80047F50) The input interface does not belong to a triangle strip object.
E_GEOMETRY_NONVECTOR3D = 3259432594: (0x80047F52) The input interface does not belong to a 3-dimensional vector.
E_GEOMETRY_NOPENDINGMOVETO = 3257532575: (0x80047F3f) The SegmentGraphCursor has no unfinished MoveTo operation.
E_GEOMETRY_NOTSIMPLE = 3253632536: (0x80047F18) The operation cannot be performed on a non-simple geometry.
E_GEOMETRY_NOT_BEZIERCURVES = 3259932599: (0x80047F57) The participating segments must be Bezier curves.
E_GEOMETRY_NOT_ID_AWARE = 3257632576: (0x80047F40) The geometry is not ID-aware.
E_GEOMETRY_NOT_M_AWARE = 3256532565: (0x80047F35) The geometry is not M-aware.
E_GEOMETRY_NOT_M_SIMPLE = 3258132581: (0x80047F45) The geometry has undefined M values for some of its vertices.
E_GEOMETRY_NOT_SINGLEPART = 3262732627: (0x80047F73) The reshaping polyline must have one part.
E_GEOMETRY_NOT_Z_AWARE = 3256432564: (0x80047F34) The geometry is not Z-aware.
E_GEOMETRY_NOT_Z_SIMPLE = 3258032580: (0x80047F44) The geometry has undefined Z values for some of its vertices.
E_GEOMETRY_NO_CURVES_IN_JSON = 3263432634: (0x80047F7a) Cannot convert polylines or polygons with curves to JSON format.
E_GEOMETRY_NO_VALID_VERTEX_ATTRIBUTES = 3255032550: (0x80047F26) Not used.
E_GEOMETRY_NULL = 3254132541: (0x80047F1d) A null geometry does not correspond to any Esri geometry type.
E_GEOMETRY_OPERATION_CANCELLED = 3261132611: (0x80047F63) The geometry operation was cancelled.
E_GEOMETRY_OUTOFMEMORY = 3257232572: (0x80047F3c) There is not enough memory.
E_GEOMETRY_OUT_OF_BOUNDS = 3256832568: (0x80047F38) The coordinates of this geometry are out of bounds.
E_GEOMETRY_PARAMETER_TOO_SMALL = 3262232622: (0x80047F6e) An input parameter is too small.
E_GEOMETRY_PARTNOTFOUND = 3253532535: (0x80047F17) The part could not be found in the geometry.
E_GEOMETRY_PART_ZS_ARE_NAN = 3260632606: (0x80047F5e) A polygon part has no defined zs.
E_GEOMETRY_PROJECTDATUM = 3255832558: (0x80047F2e) The project method cannot do a datum transformation directly on segments.
E_GEOMETRY_RELATIONSYNTAXERROR = 3257332573: (0x80047F3d) The relation expression string has a syntax error.
E_GEOMETRY_ROTATEENVELOPE = 3252032520: (0x80047F08) Envelopes cannot be rotated.
E_GEOMETRY_SEGMENTGRAPH_CANTLOAD = 3256632566: (0x80047F36) A SegmentGraph can only organize polyline and polygon objects.
E_GEOMETRY_SEGMENTGRAPH_CONSTRUCTERROR = 3256732567: (0x80047F37) The geometries could not be topologically structured.
E_GEOMETRY_SIMPLIFYFAILED = 3255632556: (0x80047F2c) Something went wrong in Polygon/Polyline simplification.
E_GEOMETRY_SR_M_MISMATCH = 3260232602: (0x80047F5a) The geometry is m-aware, but its spatial reference has no m domain or resolution defined.
E_GEOMETRY_SR_Z_MISMATCH = 3260132601: (0x80047F59) The geometry is z-aware, but its spatial reference has no z domain or resolution defined.
E_GEOMETRY_TOLERANCE_TOO_LARGE_FOR_EXTENT = 3261632616: (0x80047F68) The xy cluster tolerance was too large for the extent of the data.
E_GEOMETRY_TOOMANYPOINTS = 3257032570: (0x80047F3a) This operation produced too many points.
E_GEOMETRY_TRANSFORMATION_UNDEFINED = 3260032600: (0x80047F58) The transformation is undefined.
E_GEOMETRY_TRANSFORMENVELOPE = 3252132521: (0x80047F09) Envelopes cannot have arbitrary transformations applied to them.
E_GEOMETRY_UNDEFINEDRING = 3258632586: (0x80047F4a) The multipatch contains a ring that is invalid or has an undefined type.
E_GEOMETRY_UNDEFINED_SPATIAL_REFERENCE = 3255132551: (0x80047F27) The operation requires the presence of a spatial reference.
E_GEOMETRY_UNDERCONSTRAINED = 3252432524: (0x80047F0c) The parameters to a geometric construction did not provide enough information to complete the construction.
E_GEOMETRY_UNIT_CONVERSION = 3260932609: (0x80047F61) Cannot convert between linear and angular units.
E_GEOMETRY_UNKNOWNERROR = 3257432574: (0x80047F3e) An unknown error has occurred in the geometry system.
E_GEOMETRY_UNKNOWNTYPE = 3252332523: (0x80047F0b) The GeometryEnvironment did not know how to create a geometry of the specified type.
E_GEOMETRY_WKT_TOO_LONG = 3262132621: (0x80047F6d) The WKT(Z) parameter is too long.
E_GEOMETRY_WRONGTYPE = 3252232522: (0x80047F0a) The geometry parameter was of the wrong type for the method.
E_GEOMETRY_WRONG_RELATION_AND_TYPE = 3261332613: (0x80047F65) The specified combination of relation and geometry types is not valid.
E_GEOMETRY_ZM_OUT_OF_BOUNDS = 3262332623: (0x80047F6f) The z or m coordinates of this geometry are out of bounds.
E_GEOMETRY_Z_OUT_OF_BOUNDS = 3262432624: (0x80047F70) The z coordinates of this geometry are out of bounds.