Segment
s that define the shape of a part of a Multipart
geometry under construction. Used in Polygon
and Polyline
constructors, and by MultipartBuilder.getParts()
and MultipartBuilder.getParts()
(both builders inherit from MultipartBuilder
).
Use the methods inherited from the generic Java AbstractList<T>
class to define and change the shape of the
Part
by adding, removing, or changing its segments. Additionally, the helper methods
addPoint()
, addPoints()
, setPoint()
, and removePoint()
are all Point
based
and allow working with points that represent the vertices of the Part
, instead of working with segments.
Adjacent segments which share an end point and a start point are connected, and the shared vertex is not duplicated
when accessing points. The Part
can represent gaps between one end point and an adjacent start. However, this
is only recommended as a temporary state while modifying a multipart builder
; when using
GeometryBuilder.toGeometry()
the gaps are closed with line segments.
The SpatialReference of any geometries added to a Part
must match that of the Part
, or be null (in
which case the geometry is assumed to have the same SpatialReference as the Part
). Added geometries are not reprojected.
Parts can then be added to, inserted into, and removed from a PartCollection
, in order to
build up the complete shape of a geometry with multiple parts. Again, the SpatialReferences must be compatible.
Prior to v100.12, only LineSegment
linear segments were available to be added to parts when building
geometries. The SDK could display curved geometries, but you could not work with curves using the API; any curved
segments in a geometry would be represented as LineSegments
, and the curve information would be
lost. You can call hasCurves()
to determine if the part contains any curve segments.
From v100.12, geometry builders support curve segments. You can call hasCurves()
to determine if the part
contains any curve segments.
 Since:
 100.0.0
 See Also:

Field Summary
Fields inherited from class java.util.AbstractList
modCount

Constructor Summary
ConstructorDescriptionPart
(ImmutablePointCollection points) Creates a new part from the givenImmutablePointCollection
.Part
(ImmutablePointCollection points, SpatialReference spatialReference) Creates a new part from the given ImmutablePointCollection and SpatialReference.Part
(PointCollection points) Creates a new part from the givenPointCollection
.Part
(PointCollection points, SpatialReference spatialReference) Creates a new part from the givenPointCollection
andSpatialReference
.Part
(SpatialReference spatialReference) Creates a new emptyPart
with the given SpatialReference.Creates a new part with the given set ofSegment
s.Part
(Iterable<Segment> segments, SpatialReference spatialReference) Creates a new part with the given set ofSegment
s andSpatialReference
. 
Method Summary
Modifier and TypeMethodDescriptionvoid
Inserts the givenSegment
at the given index position in thisPart
.boolean
Appends the givenSegment
to the end of thisPart
.void
addAllPoints
(int index, Collection<? extends Point> points) Inserts the given collection ofPoint
s at the given index position in thisPart
.void
addPoint
(double x, double y) Creates a newPoint
from the given x,y coordinates and appends it to the end of thisPart
, resulting in a new LineSegment between the previous lastPoint
and the appendedPoint
.void
addPoint
(double x, double y, double z) Creates a newPoint
from the given x,y coordinates and z value, and appends it to the end of thisPart
, resulting in a newLineSegment
between the previous lastPoint
and the appendedPoint
.void
addPoint
(int index, double x, double y) Creates a newPoint
from the given x,y coordinates and inserts it at the given index position in thisPart
, by mreplacing an existingSegment
with two newLineSegment
.void
addPoint
(int index, double x, double y, double z) Creates a newPoint
from the given x,y coordinates and z value, and inserts it at the given index position in thisPart
, by replacing an existingSegment
with two newLineSegment
s.void
Inserts the givenPoint
at the given index position in thisPart
, by replacing an existingSegment
with two newLineSegment
s.void
Appends the givenPoint
to the end of thisPart
, resulting in a new LineSegment between the previous lastPoint
and the appendedPoint
.void
addPoints
(Collection<? extends Point> points) Appends the given collection ofPoint
s to the end of thisPart
, resulting in newLineSegment
s between the previous lastPoint
and each appended Point.void
clear()
Removes allSegment
s from thePart
.boolean
get
(int index) Gets a copy of theSegment
at the given index position in thisPart
.Gets a copy of aPoint
representing the end of the last Segment of thePart
.int
getEndPointIndexFromSegmentIndex
(int segmentIndex) Gets the index of the end point of a segment.getPoint
(int index) Gets a copy of thePoint
at the given index in thePart
.int
Returns the number ofPoint
s in the Part, representing the number of vertices in the shape.Gets an iterator ofPoint
s representing the ends of the Segments in thisPart
(the vertices in the shape).int
getSegmentIndexFromEndPointIndex
(int endPointIndex) Gets the index of the segment that has a given end point.int
getSegmentIndexFromStartPointIndex
(int startPointIndex) Gets the index of the segment that has a given start point.Gets the SpatialReference of the geometries in thisPart
.Gets a copy of aPoint
representing the start of the first Segment of thePart
.int
getStartPointIndexFromSegmentIndex
(int segmentIndex) Gets the index of the start point of a segment.boolean
Indicates if thisPart
containsSegment
s that represent true curves.int
boolean
isEmpty()
remove
(int index) Removes theSegment
at the specified index position from thisPart
.boolean
boolean
removeAll
(Collection<?> c) removePoint
(int index) Removes thePoint
at the given index position from thePart
.boolean
retainAll
(Collection<?> c) Replaces theSegment
at the given index position with the givenSegment
.void
Sets the givenPoint
at the given point index position in thisPart
.int
size()
Returns the number ofSegment
s in thisPart
.Methods inherited from class java.util.AbstractList
addAll, equals, hashCode, iterator, lastIndexOf, listIterator, listIterator, removeRange, subList
Methods inherited from class java.util.AbstractCollection
addAll, containsAll, toArray, toArray, toString
Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, wait, wait, wait
Methods inherited from interface java.util.Collection
parallelStream, removeIf, stream, toArray
Methods inherited from interface java.util.List
addAll, containsAll, replaceAll, sort, spliterator, toArray, toArray

Constructor Details

Part
Creates a new emptyPart
with the given SpatialReference. SpatialReference cannot be changed after instantiation. Parameters:
spatialReference
 the SpatialReference of the newPart
. May be null. Since:
 100.0.0

Part
Creates a new part with the given set ofSegment
s. The segments in the part can be modified after instantiation. TheSpatialReference
of the newPart
will match that of the given segments. Parameters:
segments
 the set of Segments that this Part will be initialized with. For example, this argument may be an existing Part, ImmutablePart, or standard generic Java ArrayList containing Segments. If null, an empty Part is created. Throws:
ArcGISRuntimeException
 ifsegments
contains Segments that have differing SpatialReferences set. Since:
 100.0.0
 See Also:

Part
Creates a new part with the given set ofSegment
s andSpatialReference
. The segments in the part can be modified after instantiation.Use this constructor to create a new
Part
with a specificSpatialReference
from an existing set of segments that have nullSpatialReference
s (the segments are assigned the givenSpatialReference
; they are not projected). Can also be used where theSpatialReference
of some segments matches that of the argument, but is null for other segments. Parameters:
segments
 the set of Segments that this Part will be initialized with. For example, this argument may be an existing Part, ImmutablePart, or standard generic JavaArrayList
containing Segments. If null, an emptyPart
is created.spatialReference
 the SpatialReference of the new Part. May be null. Throws:
ArcGISRuntimeException
 if thesegments
argument contains Segments with SpatialReferences that do not match thespatialReference
argument. Since:
 100.0.0
 See Also:

Part
Creates a new part from the givenPointCollection
. The part can be modified after instantiation. TheSpatialReference
of the newPart
will match that of the given points. Parameters:
points
 the set of Points that this Part will be initialized with. If null, an empty Part is created. Since:
 100.0.0

Part
Creates a new part from the givenPointCollection
andSpatialReference
. The part can be modified after instantiation.Use this constructor to create a new
Part
with a specificSpatialReference
from an existingPointCollection
that has a nullSpatialReference
(the points are assigned the givenSpatialReference
; they are not projected). Parameters:
points
 the set of Points that this Part will be initialized with. If null, an empty Part is created.spatialReference
 the SpatialReference of the new Part. May be null. Throws:
ArcGISRuntimeException
 if thepoints
argument contains Points with SpatialReferences that do not match thespatialReference
argument. Since:
 100.0.0

Part
Creates a new part from the givenImmutablePointCollection
. The part can be modified after instantiation. TheSpatialReference
of the newPart
will match that of the given points.Use this constructor to create a new
Part
from aPart
of an existingPolygon
orPolyline
by usingImmutablePart.getPoints()
. Parameters:
points
 the set of Points that this Part will be initialized with Since:
 100.0.0

Part
Creates a new part from the given ImmutablePointCollection and SpatialReference. The part can be modified after instantiation.Use this constructor to create a new
Part
with a specificSpatialReference
from an existingImmutablePointCollection
that has a nullSpatialReference
(the points are assigned the givenSpatialReference
; they are not projected). An example of this is to create a newPart
from aPart
of an existingPolygon
orPolyline
by usingImmutablePart.getPoints()
. Parameters:
points
 the set of Points that this Part will be initialized with. If null, an empty Part is created.spatialReference
 spatialReference the SpatialReference of the new Part. May be null. Since:
 100.0.0


Method Details

getSpatialReference
Gets the SpatialReference of the geometries in thisPart
. TheSpatialReference
defines how coordinates correspond to locations in the real world. This is set during instantiation and cannot be changed. May be null. Returns:
 the SpatialReference of the geometries in this Part
 Since:
 100.0.0

isEmpty
public boolean isEmpty() Specified by:
isEmpty
in interfaceCollection<Segment>
 Specified by:
isEmpty
in interfaceList<Segment>
 Overrides:
isEmpty
in classAbstractCollection<Segment>

contains
 Specified by:
contains
in interfaceCollection<Segment>
 Specified by:
contains
in interfaceList<Segment>
 Overrides:
contains
in classAbstractCollection<Segment>

get
Gets a copy of theSegment
at the given index position in thisPart
. Specified by:
get
in interfaceList<Segment>
 Specified by:
get
in classAbstractList<Segment>
 Parameters:
index
 the index of the Segment to copy Returns:
 a copy of the Segment at the given index
 Throws:
IndexOutOfBoundsException
 ifindex < 0  index >= size()
 Since:
 100.0.0

size
public int size()Returns the number ofSegment
s in thisPart
. Use this to find the maximum index for callingget(int)
.A
Part
can also be represented by a set ofPoint
s representing each vertex; thegetPointCount()
method returns the number ofPoint
s in thePart
. SeegetPointCount()
for an explanation of how the two relate. Specified by:
size
in interfaceCollection<Segment>
 Specified by:
size
in interfaceList<Segment>
 Specified by:
size
in classAbstractCollection<Segment>
 Since:
 100.0.0
 See Also:

indexOf

set
Replaces theSegment
at the given index position with the givenSegment
.Use this method to update a segment in a
Part
 as segments are immutable, properties of existing segments cannot be changed. Specified by:
set
in interfaceList<Segment>
 Overrides:
set
in classAbstractList<Segment>
 Parameters:
index
 the index of the Segment to replacesegment
 the Segment to set at the given index Throws:
IndexOutOfBoundsException
 ifindex
< 0 index
>= size()NullPointerException
 ifsegment
is nullArcGISRuntimeException
 if thesegment
has a SpatialReference that does not match that of this Part. The SpatialReference of thesegment
may however be null. Since:
 100.0.0
 See Also:

add
Appends the givenSegment
to the end of thisPart
. If thestart point
of the segment matches the previousend point
, the segment will share this point.The count of points will increase by 1 if the segment connects, or 2 points if it is disconnected.
If the
start point
of the appendedSegment
is at a different location from theend point
of the previousSegment
, a gap will be introduced to thePart
. Any gaps will be replaced by new connecting segments in the return value ofGeometryBuilder.toGeometry()
.A more efficient way to add a
LineSegment
to a part is to use of the point addition methods. For example,addPoint(double, double)
. Specified by:
add
in interfaceCollection<Segment>
 Specified by:
add
in interfaceList<Segment>
 Overrides:
add
in classAbstractList<Segment>
 Parameters:
segment
 the Segment to append to this PointCollection Returns:
 always true
 Throws:
NullPointerException
 ifsegment
is nullArcGISRuntimeException
 if thesegment
has a SpatialReference that does not match that of this Part. The SpatialReference of thesegment
may however be null. Since:
 100.0.0
 See Also:

add
Inserts the givenSegment
at the given index position in thisPart
. The index positions of all existingSegment
s at that index or greater increase by one.If the
start point
and/orend point
of the insertedSegment
is at a different location to those of the adjacentSegment
s, gap(s) will be introduced to thePart
. Any gaps will be replaced by new connecting segments in the return value ofGeometryBuilder.toGeometry()
. Alternatively, use theaddPoint(int, Point)
method to insert aPoint
in thePart
. Specified by:
add
in interfaceList<Segment>
 Overrides:
add
in classAbstractList<Segment>
 Parameters:
index
 the index of the Segment to insert in the Partsegment
 the Segment to insert at the given index Throws:
NullPointerException
 ifsegment
is nullArcGISRuntimeException
 if thesegment
has a SpatialReference that does not match that of this Part. The SpatialReference of thesegment
may however be null.IndexOutOfBoundsException
 ifindex
< 0 index
> size() Since:
 100.0.0
 See Also:

remove
Removes theSegment
at the specified index position from thisPart
. No other segments are changed when this method is called, which may result in a gap between the segment ends. Specified by:
remove
in interfaceList<Segment>
 Overrides:
remove
in classAbstractList<Segment>
 Parameters:
index
 the index of the Segment to remove Returns:
 a copy of the removed Segment
 Throws:
IndexOutOfBoundsException
 ifindex
< 0 index
>= size() Since:
 100.0.0
 See Also:

remove
 Specified by:
remove
in interfaceCollection<Segment>
 Specified by:
remove
in interfaceList<Segment>
 Overrides:
remove
in classAbstractCollection<Segment>

removeAll
 Specified by:
removeAll
in interfaceCollection<Segment>
 Specified by:
removeAll
in interfaceList<Segment>
 Overrides:
removeAll
in classAbstractCollection<Segment>

retainAll
 Specified by:
retainAll
in interfaceCollection<Segment>
 Specified by:
retainAll
in interfaceList<Segment>
 Overrides:
retainAll
in classAbstractCollection<Segment>

getPointCount
public int getPointCount()Returns the number ofPoint
s in the Part, representing the number of vertices in the shape. Use this to find the maximum index for callinggetPoint(int)
.Typically this number is one greater than the number of
Segment
s in the part (size()
). Where two adjacent segments share a start and end location (there is no gap between the segments), this is represented by a singlePoint
. If using pointbased methods to construct Parts, there will be no gaps between segments. However if using Segments to construct Parts, it is possible to introduce gaps between segments.Gaps are eliminated when geometries are built using the
GeometryBuilder.toGeometry()
method. CompletedMultipart
geometries do not have gaps between the segments of a part, but separatePart
s may be disjoint. Returns:
 the number of Points in the Part
 Since:
 100.0.0
 See Also:

getStartPoint
Gets a copy of aPoint
representing the start of the first Segment of thePart
. This is a shortcut to getting the first Segment in thePart
, then getting its start point usingSegment.getStartPoint()
, or getting the first Point in thePart
usinggetPoint(int)
. Returns:
 a Point representing the start point
 Since:
 100.0.0
 See Also:

getEndPoint
Gets a copy of aPoint
representing the end of the last Segment of thePart
. This is a shortcut to getting the last Segment in thePart
, then getting its end point usingSegment.getEndPoint()
, or getting the last Point in thePart
usinggetPoint(int)
. Returns:
 a Point representing the end point
 Since:
 100.0.0
 See Also:

hasCurves
public boolean hasCurves()Indicates if thisPart
containsSegment
s that represent true curves.The ArcGIS system supports polygon and polyline geometries that contain curved segments in some types of data, for example geodatabases, feature services, and JSON.
Prior to v100.12, only
LineSegment
linear segments were available to be added to parts when building geometries. The SDK could display curved geometries, but you could not work with curves using the API; any curved segments in a geometry would be represented asLineSegments
, and the curve information would be lost. In editing workflows, use this method to determine if thisPart
contains curve information which would be lost if used in an editing workflow.From v100.12, geometry builders support curve segments. This method returns true if any segments where
Segment.isCurve()
is true have been added to the part. Returns:
 true if the part contains any curve segments; false otherwise
 Since:
 100.12.0
 See Also:

getPoints
Gets an iterator ofPoint
s representing the ends of the Segments in thisPart
(the vertices in the shape).Where two adjacent segments share a start and end location (there is no gap between the segments), this is represented by a single
Point
. SeegetPointCount()
for more information. Returns:
 an iterator of Points
 Since:
 100.0.0
 See Also:

getPoint
Gets a copy of thePoint
at the given index in thePart
. UsegetPointCount()
to determine the maximum possible index. Note that points are copied, and therefore returned byvalue.The vertices of a
MultipartBuilder
's current state can be represented as a series ofPoint
s, which can be accessed using this method, or by thegetPoints()
iterator. If the geometry containscurves
, that information cannot be represented by points; segmentbased methods such asget(int)
anditerator()
may be more appropriate instead. Note that at the current release, true curves are not supported. Parameters:
index
 the index of the Point to get Returns:
 a copy of the Point at the given index
 Throws:
IndexOutOfBoundsException
 ifindex
< 0 index
>= getPointCount() Since:
 100.0.0

addPoint
Appends the givenPoint
to the end of thisPart
, resulting in a new LineSegment between the previous lastPoint
and the appendedPoint
. This is a common method to use when buildingMultipart
shapes without curves, as it may be simpler than usingadd(Segment)
and creatingSegment
s explicitly.Alternatives exist to append a new Point by specifying coordinates directly, using
addPoint(double, double)
) or similar overloads. Use theaddPoint(int, Point)
to insert aPoint
at a position other than the end of thePart
. Parameters:
point
 the Point to append to this Part Throws:
NullPointerException
 ifpoint
is nullArcGISRuntimeException
 if thepoint
has a SpatialReference that does not match that of this Part. The SpatialReference of thepoint
may however be null. Since:
 100.0.0

addPoint
public void addPoint(double x, double y) Creates a newPoint
from the given x,y coordinates and appends it to the end of thisPart
, resulting in a new LineSegment between the previous lastPoint
and the appendedPoint
. This is a common method to use when buildingMultipart
shapes without curves, as it may be simpler than usingadd(Segment)
and creatingSegment
s explicitly.The appended
Point
will have default z and m values, and will take on the spatial reference of thePart
; therefore ensure that thex
andy
parameters are defined in the spatial reference of thisPart
. If either x or y are NaN, the added Point will beempty
. Alternatively, append an existing Point object to aPart
usingaddPoint(Point)
). Parameters:
x
 the x coordinate of the new Point added to the Party
 the y coordinate of the new Point added to the Part Since:
 100.0.0

addPoint
public void addPoint(double x, double y, double z) Creates a newPoint
from the given x,y coordinates and z value, and appends it to the end of thisPart
, resulting in a newLineSegment
between the previous lastPoint
and the appendedPoint
. This is a common method to use when buildingMultipart
shapes without curves, as it may be simpler than usingadd(Segment)
and creatingSegment
s explicitly.The appended
Point
will take on the spatial reference of thePart
; therefore ensure that thex
andy
parameters are defined in the spatial reference of thisPart
. Alternatively, append an existing Point object to aPart
usingaddPoint(Point)
). Parameters:
x
 the x coordinate of the new Point added to the Party
 the y coordinate of the new Point added to the Partz
 the z value of the new Point added to the Part Since:
 100.0.0

addPoints
Appends the given collection ofPoint
s to the end of thisPart
, resulting in newLineSegment
s between the previous lastPoint
and each appended Point. This is a common method to use when buildingMultipart
shapes without curves, as it may be simpler than usingaddAll(Collection)
and creatingSegment
s explicitly. Parameters:
points
 the collection of Points to append to the end of this Part Throws:
NullPointerException
 ifpoints
is nullArcGISRuntimeException
 if thepoints
have a SpatialReference that does not match that of this Part. The SpatialReference of thepoints
may however be null. Since:
 100.0.0

addPoint
Inserts the givenPoint
at the given index position in thisPart
, by replacing an existingSegment
with two newLineSegment
s. The index positions of all subsequentSegment
s (andPoint
s) increase by one. Gaps between adjacent segments cannot be introduced by pointbased methods, but existing gaps may be maintained; if affected segments already have a gap.Alternatively, use the
addPoint(Point)
method to append aPoint
to the end of thePart
. Parameters:
index
 the index of the Point to insert in the Partpoint
 the Point to insert at the given index Throws:
NullPointerException
 ifpoint
is nullArcGISRuntimeException
 if thepoint
has a SpatialReference that does not match that of this Part. The SpatialReference of thepoint
may however be null.IndexOutOfBoundsException
 ifindex
< 0 index
> getPointCount() Since:
 100.0.0
 See Also:

addPoint
public void addPoint(int index, double x, double y) Creates a newPoint
from the given x,y coordinates and inserts it at the given index position in thisPart
, by mreplacing an existingSegment
with two newLineSegment
. The index positions of all subsequentSegment
s (andPoint
s) increase by one. Gaps between adjacent segments cannot be introduced byPoint
based methods, but existing gaps may be maintained; if affected segments already have a gap. Parameters:
index
 the index of the Point to insert in the Partx
 the x coordinate of the new Point inserted into the Party
 the y coordinate of the new Point inserted into the Part Throws:
IndexOutOfBoundsException
 ifindex
< 0 index
> getPointCount() Since:
 100.0.0

addPoint
public void addPoint(int index, double x, double y, double z) Creates a newPoint
from the given x,y coordinates and z value, and inserts it at the given index position in thisPart
, by replacing an existingSegment
with two newLineSegment
s. The index positions of all subsequentSegment
s (andPoint
s) increase by one. Gaps between adjacent segments cannot be introduced byPoint
based methods, but existing gaps may be maintained; if affected segments already have a gap. Parameters:
index
 the index of the Point to insert in the Partx
 the x coordinate of the new Point inserted into the Party
 the y coordinate of the new Point inserted into the Partz
 the z value of the new Point inserted into the Part Throws:
IndexOutOfBoundsException
 ifindex
< 0 index
> getPointCount() Since:
 100.0.0

addAllPoints
Inserts the given collection ofPoint
s at the given index position in thisPart
. Up to two existingSegment
s may be removed and replaced by newLineSegment
s connecting to the newPoint
s; additionally newLineSegment
s are created between each insertedPoint
. This is a common method to use when buildingMultipart
shapes without curves, as it may be simpler than usingaddAll(int, Collection)
and creating Segments explicitly. Parameters:
index
 the index position at which to begin inserting the points into the Partpoints
 the collection of Points to insert at the given position Throws:
NullPointerException
 ifpoints
is nullArcGISRuntimeException
 if any Point inpoints
has a SpatialReference that does not match that of this Part. The SpatialReference of a Point may however be null.IndexOutOfBoundsException
 ifindex
< 0 index
> getPointCount() Since:
 100.0.0

setPoint
Sets the givenPoint
at the given point index position in thisPart
. This replaces thePoint
previously at that position and updates the segments that use it.The points in the part correspond to start and end points of segments. Setting a new point will affect 1 or 2 segments using the point at the specified index. The type of affected segment(s) (
LineSegment
,CubicBezierSegment
orEllipticArcSegment
) will remain the same.For affected cubic bezier segments, the shape of the curve may change because the control points remain the same, as does the unchanged start or end point location. For elliptic arc segments, the arc parameters are adjusted enough to ensure the unchanged start or end point location remains the same.
 Parameters:
index
 the index position within the Part at which to set the Pointpoint
 the Point to set Throws:
IndexOutOfBoundsException
 ifindex
< 0 index
>= getPointCount()IllegalArgumentException
 if point is null Since:
 100.3.0

removePoint
Removes thePoint
at the given index position from thePart
. The two existingSegment
s that start and end at thisPoint
are removed, and replaced by a newLineSegment
that connects the adjacentPoint
s.This is a common method to use when editing
Multipart
shapes without curves, as it may be simpler than working withSegment
s and usingremove(int)
. Parameters:
index
 the index of the Point to remove from the Part Returns:
 a copy of the removed Point
 Throws:
IndexOutOfBoundsException
 ifindex
< 0 index
>= getPointCount() Since:
 100.0.0

getSegmentIndexFromStartPointIndex
public int getSegmentIndexFromStartPointIndex(int startPointIndex) Gets the index of the segment that has a given start point. Parameters:
startPointIndex
 the 0based index of the start point Returns:
 the index of the segment, or 1 if startPointIndex does not correspond to a segment start point
 Throws:
IndexOutOfBoundsException
 if startPointIndex is out of bounds Since:
 100.1.0

getSegmentIndexFromEndPointIndex
public int getSegmentIndexFromEndPointIndex(int endPointIndex) Gets the index of the segment that has a given end point. Parameters:
endPointIndex
 the 0based index of the end point Returns:
 the index of the segment, or 1 if endPointIndex does not correspond to a segment end point
 Throws:
IndexOutOfBoundsException
 if endPointIndex is out of bounds Since:
 100.1.0

getStartPointIndexFromSegmentIndex
public int getStartPointIndexFromSegmentIndex(int segmentIndex) Gets the index of the start point of a segment. Parameters:
segmentIndex
 the 0based index of the segment Returns:
 the index of the start point
 Throws:
IndexOutOfBoundsException
 if segmentIndex is out of bounds Since:
 100.1.0

getEndPointIndexFromSegmentIndex
public int getEndPointIndexFromSegmentIndex(int segmentIndex) Gets the index of the end point of a segment. Parameters:
segmentIndex
 the 0based index of the segment Returns:
 the index of the end point
 Throws:
IndexOutOfBoundsException
 if segmentIndex is out of bounds Since:
 100.1.0

clear
public void clear()Removes allSegment
s from thePart
. Using this method is more efficient than removing allSegment
s individually.After calling this method, the
Part
will have asize()
of zero. It will also have agetPointCount()
of zero because the Points in aPart
represent the ends of its currentSegment
s. Specified by:
clear
in interfaceCollection<Segment>
 Specified by:
clear
in interfaceList<Segment>
 Overrides:
clear
in classAbstractList<Segment>
 Since:
 100.0.0
 See Also:
