Interface IRasterGeometryProc
- Namespace
- ESRI.ArcGIS.DatasourcesRaster
- Assembly
- ESRI.Server.DatasourcesRaster.dll
Provides access to members that allow raster geometry processing.
[InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
[Guid("2B473C3C-B18E-11D3-A650-0008C7DF88A8")]
public interface IRasterGeometryProc
Remarks
The RasterGeometryProc manipulates only Raster objects, not RasterBand or RasterDataset object. This is because the Raster is transient, as are the effects of the RasterGeometryProc. This means that any transformation will also go away when the Raster object goes out of scope.
To keep the transformed data for later use, you must persist the transformation using Register or Rectify. If used on a Raster contained within a RasterLayer, processing performed by this object will be visible when the display is refreshed.
Although Merge and Mosaic take Raster object as an input, any changes to the Raster object before calling the two methods will be ignored.
Properties
IsPixelToMapTransSimple[IRaster]
Indicates if the transformation of pixel to map is simple.
bool IsPixelToMapTransSimple[IRaster pRaster] { get; }
Parameters
pRasterIRaster
Property Value
Remarks
The IsPixelToMapTransSimple property indicates whether the transformation in the Raster object is a simple transformation or not. A simple transformation is an affine transformation without rotation.
Methods
Clip(IEnvelope, IRaster)
Clips the input raster based on the specified envelope.
void Clip(IEnvelope ipRectangle, IRaster pRaster)
Parameters
Flip(IRaster)
Flips the input raster.
void Flip(IRaster pRaster)
Parameters
pRasterIRaster
LeastSquareFit(IPointCollection, IPointCollection, esriGeoTransTypeEnum, bool, bool)
Computes a least squares fit for the input control points.
object LeastSquareFit(IPointCollection sourceControlPoints, IPointCollection targetControlPoints, esriGeoTransTypeEnum transformType, bool forwardTransformation, bool returnTransformationCoef)
Parameters
sourceControlPointsIPointCollectiontargetControlPointsIPointCollectiontransformTypeesriGeoTransTypeEnumforwardTransformationboolreturnTransformationCoefbool
Returns
Remarks
The numbers of points in the SourceControlPoints and targetControlPoints must be equal. To create a first order polynomial transformation, there should be at least 3 un-correlated points for both source and target control points. For the second order and third order polynomial transformations, the minimum number of un-correlated points are 6 and 10 respectively.
Setting the argument forwardTransformation to be true indicates the transformation will be computed from SourceControls to targetControlPoints, while setting it to be false indicates the transformation will be computed from targetControlPoints to SourceControlPoints.
Setting the argument ReturnTransformationCoef to be true indicates the returned variant will be the coefficients of the transformation polynomial, while setting it to be false indicates that the returned variant will be residual.
The returned coefficients are represented as a Nx2 array with N varies with the transformation order. The returned residual is represented as a one-dimensional array. The number of the element in the array equals the number of the control points.
Merge(string, IWorkspace, string, double, ISpatialReference, IRaster)
Merges the input rasters into a single dataset.
IRaster Merge(string saveas_name, IWorkspace ipWorkspace, string outRasterFormat, double CellSize, ISpatialReference ipSR, IRaster pRaster)
Parameters
saveas_namestringipWorkspaceIWorkspaceoutRasterFormatstringCellSizedoubleipSRISpatialReferencepRasterIRaster
Returns
Remarks
Merge only work with single band images. It is recomended to use MosaicRaster object, which handles both single band and multiple band images,to perform merge operation.
The Merge method combines multiple adjacent single band raster datasets into a single output raster dataset. Merge determines the value of an overlapping output cell from the last NoData cell input of the input rasters.
The ipRaster is a Raster object that contains two or more bands, and the Merge operation combines all the bands of this raster into a single band raster dataset on disk.
Passing Nothing to the ipSR will result in an output with an unknown spatial reference.
The OutRasterFormat can only be one of the following formats. The format strings used for the supported formats are below, and they are case sensitive:
| Format Name | String Used |
|---|---|
| Imagine | "IMAGINE Image" |
| TIFF | "TIFF" |
| GRID | "GRID" |
| JPEG | "JPG" |
| JP2000 | "JP2" |
| BMP | "BMP" |
| PNG | "PNG" |
| GIF | "GIF" |
| PCI Raster | "PIX" |
| USGS ASCII DEM | "DEM" |
| X11 Pixmap | "XPM" |
| PCRaster | "MAP" |
| USGS ASCII DEM | "DEM" |
| Memory Raster | "MEM" |
| Geodatabase Raster | "GDB" |
Mirror(IRaster)
Mirrors the input raster.
void Mirror(IRaster pRaster)
Parameters
pRasterIRaster
Mosaic(string, IWorkspace, string, double, ISpatialReference, IRaster)
Mosaics the input rasters into a single dataset.
IRaster Mosaic(string saveas_name, IWorkspace pWorkspace, string outRasterFormat, double CellSize, ISpatialReference pSR, IRaster pRaster)
Parameters
saveas_namestringpWorkspaceIWorkspaceoutRasterFormatstringCellSizedoublepSRISpatialReferencepRasterIRaster
Returns
Remarks
Mosaic only work with single band images. It is recomended to use MosaicRaster object, which handles both single band and multiple band images,to perform mosaic operation.
The Mosaic method combines multiple adjacent single band raster datasets into a single output raster dataset. Mosaic determines the value of an output call by averaging the values of the overlapping input cells.
The ipRaster is a Raster object that contains two or more raster bands, and the Mosaic operation combines all the bands of the raster into one single band raster dataset on disk.
Passing Nothing to the ipSR will result in an output with an unknown spatial reference.
The OutRasterFormat can only be one of the following formats. The format strings used for the supported formats are below, and they are case sensitive:
| Format Name | String Used |
|---|---|
| Imagine | "IMAGINE Image" |
| TIFF | "TIFF" |
| GRID | "GRID" |
| JPEG | "JPG" |
| JP2000 | "JP2" |
| BMP | "BMP" |
| PNG | "PNG" |
| GIF | "GIF" |
| PCI Raster | "PIX" |
| USGS ASCII DEM | "DEM" |
| X11 Pixmap | "XPM" |
| PCRaster | "MAP" |
| USGS ASCII DEM | "DEM" |
| Memory Raster | "MEM" |
| Geodatabase Raster | "GDB" |
PointsTransform(IPointCollection, bool, IRaster)
Transforms a set of points based upon the transformation being applied to the input raster.
IPointCollection PointsTransform(IPointCollection inPoints, bool isForward, IRaster pRaster)
Parameters
inPointsIPointCollectionisForwardboolpRasterIRaster
Returns
Remarks
The PointsTransform method transforms a set of points and using the transformations currently held in the input raster. The points can be transformed forwards or backwards.
Project(ISpatialReference, esriRasterPrjMethodTypeEnum, rstResamplingTypes, double, IRaster)
Projects the input raster using specified transformation type.
void Project(ISpatialReference pNewSR, esriRasterPrjMethodTypeEnum PrjMethodType, rstResamplingTypes resampleType, double newCellsize, IRaster pRaster)
Parameters
pNewSRISpatialReferencePrjMethodTypeesriRasterPrjMethodTypeEnumresampleTyperstResamplingTypesnewCellsizedoublepRasterIRaster
Remarks
This method is not implemented in ArcGIS 9.0
ProjectFast(ISpatialReference, rstResamplingTypes, ref object, IRaster)
Projects the input raster using a single polynomial fit to compute the adjustment between coordinate systems.
void ProjectFast(ISpatialReference pNewSR, rstResamplingTypes resampleType, ref object pCellsize, IRaster pRaster)
Parameters
pNewSRISpatialReferenceresampleTyperstResamplingTypespCellsizeobjectpRasterIRaster
Remarks
The ProjectFast method projects a raster to a new spatial reference with a specified cell size. ProjectFast method does not project a raster cell by cell, instead, this method divides the whole raster into 64 x 64 pixel blocks and projects a raster based on a piecewise polynomial transformation algorithm, whereby each block is transformed using a polynomial warp. Altough this method is not as accurate as the cell by cell projection (PROJECT command in ArcGrid™), it is faster and accurate enough for most application and analysis.
ReScale(double, double, IRaster)
Scales the input raster by the specified x and y scale factors.
void ReScale(double xScale, double yScale, IRaster pRaster)
Parameters
Rectify(string, string, IRaster)
Persists the input raster to a new dataset of the specified format.
void Rectify(string saveas_name, string Format, IRaster pRaster)
Parameters
Remarks
The output formats as well as the strings used for the supported formats are below, and they are case sensitive:
| Format Name | String Used |
|---|---|
| Imagine | "IMAGINE Image" |
| TIFF | "TIFF" |
| GRID | "GRID" |
| JPEG | "JPG" |
| JP2000 | "JP2" |
| BMP | "BMP" |
| PNG | "PNG" |
| GIF | "GIF" |
| PCI Raster | "PIX" |
| USGS ASCII DEM | "DEM" |
| X11 Pixmap | "XPM" |
| PCRaster | "MAP" |
| USGS ASCII DEM | "DEM" |
Register(IRaster)
Outputs the current transformation properties to the dataset header or auxilliary file.
void Register(IRaster pRaster)
Parameters
pRasterIRaster
Remarks
To prevent the need for resampling, the Register method persists the transformation into the auxiliary file associated with the dataset on disk. The presence of this transformation on disk means that the data can be transformed on-the-fly to its correct position for display and analysis. However, because the transformation is stored in the auxiliary file, only ArcGIS, ArcObjects, and ERDAS IMAGINE will be able to use this information. Register will not correctly maintain the transformation for rasters that have been clipped. To provide compatibility with ArcGIS for Desktop Advanced Workstation, complex transformations cannot be written to GRID-format datasets.
Resample(rstResamplingTypes, double, IRaster)
Resamples the input raster to a new cellsize.
void Resample(rstResamplingTypes resampleType, double newCellsize, IRaster pRaster)
Parameters
resampleTyperstResamplingTypesnewCellsizedoublepRasterIRaster
Reset(IRaster)
Resets the input raster to its native coordinate space.
void Reset(IRaster pRaster)
Parameters
pRasterIRaster
Remarks
The Reset method sets the raster back to its initial state. The transformations that have been put to the raster but have not been persisted to the raster dataset will be gone after calling this method
Rotate(IPoint, double, IRaster)
Rotates the input raster around the specified pivot by an angle specified in degrees.
void Rotate(IPoint pPivotPoint, double rotateAngle, IRaster pRaster)
Parameters
Remarks
The Rotate method rotates the raster by the angle input in degrees around the input pivot point, if specified. If no pivot point is specified, the raster is rotated around its center point. Positive rotateAngle rotates the raster counter-clockwise, while negative rotateAngle rotates the raster clockwise.
Shift(double, double, IRaster)
Shifts the input raster by deltaX and deltaY map units.
void Shift(double deltaX, double deltaY, IRaster pRaster)
Parameters
TwoPointsAdjust(IPointCollection, IPointCollection, IRaster)
Performs a Hermite transformation on the input raster based upon the 2 input control point pairs.
void TwoPointsAdjust(IPointCollection sourceControlPoints, IPointCollection targetControlPoints, IRaster pRaster)
Parameters
sourceControlPointsIPointCollectiontargetControlPointsIPointCollectionpRasterIRaster
Remarks
The TwoPointsAdjust method computes a Hermite transformation from a pair of links and applies to the raster. A Hermite transformation can shift, rotate, and scale a raster.
es a minimum number of control links. They are 3, 6, and 10 for order 1,2, and 3, respectively.
Warp(IPointCollection, IPointCollection, esriGeoTransTypeEnum, IRaster)
Warps the input raster based upon the input control points using the transformation type specified.
void Warp(IPointCollection sourceControlPoints, IPointCollection targetControlPoints, esriGeoTransTypeEnum transformType, IRaster pRaster)
Parameters
sourceControlPointsIPointCollectiontargetControlPointsIPointCollectiontransformTypeesriGeoTransTypeEnumpRasterIRaster
Remarks
Warp method computes a polynomial transformation based on the input links, then applies this transformation to the input raster. The polynomial transformation specified can be first, second, or third order polynomials. Each transformation order requires a minimum number of control links. They are 3, 6, and 10 for order 1,2, and 3, respectively.