Sketch editor

View on GitHub

Sample viewer app

Use the Sketch Editor to edit or sketch a new point, line, or polygon geometry on to a map.

Image of sketch editor App

Use case

A field worker could annotate features of interest on a map (via the GUI) such as location of dwellings (marked as points), geological features (polylines), or areas of glaciation (polygons).

How to use the sample

Choose which geometry type to sketch from one of the available buttons along the bottom of the screen. Choose from points, multipoints, polylines, polygons, freehand polylines, and freehand polygons.

Use the buttons at the top of the screen to: undo or redo change made to the sketch whilst in sketch mode, and to save the sketch to the graphics overlay.

How it works

Create a SketchEditor and pass it to the MapView with mapView.setSketchEditor(sketchEditor).
Use SketchEditor.start(SketchCreationMode) to start sketching.
If editing an existing graphic's geometry, use SketchEditor.start(graphic.getGeometry).
Check to see if undo and redo are possible during a sketch session using sketchEditor.canUndo() and sketchEditor.canRedo(). If it's possible, use sketchEditor.undo() and sketchEditor.redo().
Check if sketch is valid using sketchEditor.isSketchValid(), then allow the sketch to be saved to a GraphicsOverlay.
Get the geometry of the sketch using sketchEditor.getGeometry(), and create a new Graphic from that geometry. Add the graphic to the graphics overlay.
To exit the sketch editor, use sketchEditor.stop().

Relevant API

Geometry
Graphic
GraphicsOverlay
MapView
SketchCreationMode
SketchEditor

Sample Code

MainActivity.java
/*
 * Copyright 2018 Esri
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.esri.arcgisruntime.sample.sketcheditor;

import android.os.Bundle;
import android.util.Log;
import android.view.Menu;
import android.view.MenuInflater;
import android.view.MenuItem;
import android.widget.ImageButton;
import android.widget.TextView;

import androidx.appcompat.app.AppCompatActivity;
import com.esri.arcgisruntime.ArcGISRuntimeEnvironment;
import com.esri.arcgisruntime.geometry.Geometry;
import com.esri.arcgisruntime.geometry.GeometryType;
import com.esri.arcgisruntime.mapping.ArcGISMap;
import com.esri.arcgisruntime.mapping.BasemapStyle;
import com.esri.arcgisruntime.mapping.Viewpoint;
import com.esri.arcgisruntime.mapping.view.Graphic;
import com.esri.arcgisruntime.mapping.view.GraphicsOverlay;
import com.esri.arcgisruntime.mapping.view.MapView;
import com.esri.arcgisruntime.mapping.view.SketchCreationMode;
import com.esri.arcgisruntime.mapping.view.SketchEditor;
import com.esri.arcgisruntime.symbology.SimpleFillSymbol;
import com.esri.arcgisruntime.symbology.SimpleLineSymbol;
import com.esri.arcgisruntime.symbology.SimpleMarkerSymbol;
import com.google.android.material.snackbar.Snackbar;

public class MainActivity extends AppCompatActivity {

  private final String TAG = MainActivity.class.getSimpleName();

  private SimpleMarkerSymbol mPointSymbol;
  private SimpleLineSymbol mLineSymbol;
  private SimpleFillSymbol mFillSymbol;
  private MapView mMapView;
  private SketchEditor mSketchEditor;
  private GraphicsOverlay mGraphicsOverlay;

  private ImageButton mPointButton;
  private ImageButton mMultiPointButton;
  private ImageButton mPolylineButton;
  private ImageButton mPolygonButton;
  private ImageButton mFreehandLineButton;
  private ImageButton mFreehandPolygonButton;

  @Override
  protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);

    // authentication with an API key or named user is required to access basemaps and other
    // location services
    ArcGISRuntimeEnvironment.setApiKey(BuildConfig.API_KEY);

    // define symbols
    mPointSymbol = new SimpleMarkerSymbol(SimpleMarkerSymbol.Style.SQUARE, 0xFFFF0000, 20);
    mLineSymbol = new SimpleLineSymbol(SimpleLineSymbol.Style.SOLID, 0xFFFF8800, 4);
    mFillSymbol = new SimpleFillSymbol(SimpleFillSymbol.Style.CROSS, 0x40FFA9A9, mLineSymbol);

    // inflate map view from layout
    mMapView = findViewById(R.id.mapView);
    // create a map with the Basemap Type topographic
    ArcGISMap map = new ArcGISMap(BasemapStyle.ARCGIS_LIGHT_GRAY);
    // set the map to be displayed in this view
    mMapView.setMap(map);
    mMapView.setViewpoint(new Viewpoint(34.056295, -117.195800, 100000));

    mGraphicsOverlay = new GraphicsOverlay();
    mMapView.getGraphicsOverlays().add(mGraphicsOverlay);

    // create a new sketch editor and add it to the map view
    mSketchEditor = new SketchEditor();
    mMapView.setSketchEditor(mSketchEditor);

    // get buttons from layouts
    mPointButton = findViewById(R.id.pointButton);
    mMultiPointButton = findViewById(R.id.pointsButton);
    mPolylineButton = findViewById(R.id.polylineButton);
    mPolygonButton = findViewById(R.id.polygonButton);
    mFreehandLineButton = findViewById(R.id.freehandLineButton);
    mFreehandPolygonButton = findViewById(R.id.freehandPolygonButton);

    // add click listeners
    mPointButton.setOnClickListener(view -> createModePoint());
    mMultiPointButton.setOnClickListener(view -> createModeMultipoint());
    mPolylineButton.setOnClickListener(view -> createModePolyline());
    mPolygonButton.setOnClickListener(view -> createModePolygon());
    mFreehandLineButton.setOnClickListener(view -> createModeFreehandLine());
    mFreehandPolygonButton.setOnClickListener(view -> createModeFreehandPolygon());
  }

  /**
   * When the point button is clicked, reset other buttons, show the point button as selected, and start point
   * drawing mode.
   */
  private void createModePoint() {
    resetButtons();
    mPointButton.setSelected(true);
    mSketchEditor.start(SketchCreationMode.POINT);
  }

  /**
   * When the multipoint button is clicked, reset other buttons, show the multipoint button as selected, and start
   * multipoint drawing mode.
   */
  private void createModeMultipoint() {
    resetButtons();
    mMultiPointButton.setSelected(true);
    mSketchEditor.start(SketchCreationMode.MULTIPOINT);
  }

  /**
   * When the polyline button is clicked, reset other buttons, show the polyline button as selected, and start
   * polyline drawing mode.
   */
  private void createModePolyline() {
    resetButtons();
    mPolylineButton.setSelected(true);
    mSketchEditor.start(SketchCreationMode.POLYLINE);

  }

  /**
   * When the polygon button is clicked, reset other buttons, show the polygon button as selected, and start polygon
   * drawing mode.
   */
  private void createModePolygon() {
    resetButtons();
    mPolygonButton.setSelected(true);
    mSketchEditor.start(SketchCreationMode.POLYGON);
  }

  /**
   * When the freehand line button is clicked, reset other buttons, show the freehand line button as selected, and
   * start freehand line drawing mode.
   */
  private void createModeFreehandLine() {
    resetButtons();
    mFreehandLineButton.setSelected(true);
    mSketchEditor.start(SketchCreationMode.FREEHAND_LINE);
  }

  /**
   * When the freehand polygon button is clicked, reset other buttons, show the freehand polygon button as selected,
   * and enable freehand polygon drawing mode.
   */
  private void createModeFreehandPolygon() {
    resetButtons();
    mFreehandPolygonButton.setSelected(true);
    mSketchEditor.start(SketchCreationMode.FREEHAND_POLYGON);
  }

  /**
   * When the undo button is clicked, undo the last event on the SketchEditor.
   */
  private void undo() {
    if (mSketchEditor.canUndo()) {
      mSketchEditor.undo();
    }
  }

  /**
   * When the redo button is clicked, redo the last undone event on the SketchEditor.
   */
  private void redo() {
    if (mSketchEditor.canRedo()) {
      mSketchEditor.redo();
    }
  }

  /**
   * When the stop button is clicked, check that sketch is valid. If so, get the geometry from the sketch, set its
   * symbol and add it to the graphics overlay.
   */
  private void stop() {
    if (!mSketchEditor.isSketchValid()) {
      reportNotValid();
      mSketchEditor.stop();
      resetButtons();
      return;
    }

    // get the geometry from sketch editor
    Geometry sketchGeometry = mSketchEditor.getGeometry();
    mSketchEditor.stop();
    resetButtons();

    if (sketchGeometry != null) {

      // create a graphic from the sketch editor geometry
      Graphic graphic = new Graphic(sketchGeometry);

      // assign a symbol based on geometry type
      if (graphic.getGeometry().getGeometryType() == GeometryType.POLYGON) {
        graphic.setSymbol(mFillSymbol);
      } else if (graphic.getGeometry().getGeometryType() == GeometryType.POLYLINE) {
        graphic.setSymbol(mLineSymbol);
      } else if (graphic.getGeometry().getGeometryType() == GeometryType.POINT ||
          graphic.getGeometry().getGeometryType() == GeometryType.MULTIPOINT) {
        graphic.setSymbol(mPointSymbol);
      }

      // add the graphic to the graphics overlay
      mGraphicsOverlay.getGraphics().add(graphic);
    }
  }

  /**
   * Called if sketch is invalid. Reports to user why the sketch was invalid.
   */
  private void reportNotValid() {
    String validIf;
    if (mSketchEditor.getSketchCreationMode() == SketchCreationMode.POINT) {
      validIf = "Point only valid if it contains an x & y coordinate.";
    } else if (mSketchEditor.getSketchCreationMode() == SketchCreationMode.MULTIPOINT) {
      validIf = "Multipoint only valid if it contains at least one vertex.";
    } else if (mSketchEditor.getSketchCreationMode() == SketchCreationMode.POLYLINE
        || mSketchEditor.getSketchCreationMode() == SketchCreationMode.FREEHAND_LINE) {
      validIf = "Polyline only valid if it contains at least one part of 2 or more vertices.";
    } else if (mSketchEditor.getSketchCreationMode() == SketchCreationMode.POLYGON
        || mSketchEditor.getSketchCreationMode() == SketchCreationMode.FREEHAND_POLYGON) {
      validIf = "Polygon only valid if it contains at least one part of 3 or more vertices which form a closed ring.";
    } else {
      validIf = "No sketch creation mode selected.";
    }
    String report = "Sketch geometry invalid:\n" + validIf;
    Snackbar reportSnackbar = Snackbar.make(findViewById(R.id.toolbarInclude), report, Snackbar.LENGTH_INDEFINITE);
    reportSnackbar.setAction("Dismiss", view -> reportSnackbar.dismiss());
    TextView snackbarTextView = reportSnackbar.getView().findViewById(com.google.android.material.R.id.snackbar_text);
    snackbarTextView.setSingleLine(false);
    reportSnackbar.show();
    Log.e(TAG, report);
  }

  /**
   * De-selects all buttons.
   */
  private void resetButtons() {
    mPointButton.setSelected(false);
    mMultiPointButton.setSelected(false);
    mPolylineButton.setSelected(false);
    mPolygonButton.setSelected(false);
    mFreehandLineButton.setSelected(false);
    mFreehandPolygonButton.setSelected(false);
  }

  @Override
  public boolean onCreateOptionsMenu(Menu menu) {
    MenuInflater inflater = getMenuInflater();
    inflater.inflate(R.menu.undo_redo_stop_menu, menu);
    return super.onCreateOptionsMenu(menu);
  }

  @Override
  public boolean onOptionsItemSelected(MenuItem item) {
    int id = item.getItemId();
    if (id == R.id.undo) {
      undo();
    } else if (id == R.id.redo) {
      redo();
    } else if (id == R.id.stop) {
      stop();
    }
    return super.onOptionsItemSelected(item);
  }

  @Override
  protected void onPause() {
    mMapView.pause();
    super.onPause();
  }

  @Override
  protected void onResume() {
    super.onResume();
    mMapView.resume();
  }

  @Override
  protected void onDestroy() {
    super.onDestroy();
    mMapView.dispose();
  }
}

DocumentationArcGIS Runtime API for AndroidJava samples

Sketch editor

Was this page helpful?

Was this page helpful?

DocumentationArcGIS Runtime API for AndroidJava samples

Sketch editor

Use case

How to use the sample

How it works

Relevant API

Tags

Sample Code

Was this page helpful?

Was this page helpful?