Skip To Content ArcGIS for Developers Sign In Dashboard

GeometryEngine QML Type

Provides a set of methods to perform geometric operations on geometry instances. More...

Import Statement: import Esri.ArcGISRuntime 100.6
Since: Esri.ArcGISRuntime 100.0
Inherits:

Object

Methods

  • double area(Geometry geometry)
  • double areaGeodetic(Geometry geometry, AreaUnit unit, GeodeticCurveType curveType)
  • list<Geometry> autoComplete(list<Geometry> existingBoundaries, list<Geometry> newBoundaries)
  • Geometry boundary(Geometry geometry)
  • Polygon buffer(Geometry geometry, double distance)
  • Polygon bufferGeodetic(Geometry geometry, double distance, LinearUnit unit, double maxDeviation, GeodeticCurveType curveType)
  • list<Polygon> bufferGeodeticOfGeometries(list<Geometry> geometries, list<double> distances, LinearUnit unit, double maxDeviation, Enums::GeodeticCurveType curveType, bool unionResult)
  • list<Polygon> bufferOfGeometries(list<Geometry> geometries, list<double> distances, bool unionResult)
  • Geometry clip(Geometry geometry, Envelope envelope)
  • Geometry combineExtents(Geometry geometry1, Geometry geometry2)
  • Geometry combineExtentsOfGeometries(list<Geometry> geometries)
  • bool contains(Geometry geometry1, Geometry geometry2)
  • Geometry convexHull(Geometry geometry)
  • list<Geometry> convexHullOfGeometries(list<Geometry> geometries)
  • Point createPointAlong(Polyline polyline, double distance)
  • bool crosses(Geometry geometry1, Geometry geometry2)
  • list<Geometry> cut(Geometry geometry, Polyline cutter)
  • Geometry densify(Geometry geometry, double maxSegmentLength)
  • Geometry densifyGeodetic(Geometry geometry, double maxSegmentLength, LinearUnit lengthUnit, GeodeticCurveType curveType)
  • Geometry difference(Geometry geometry1, Geometry geometry2)
  • bool disjoint(Geometry geometry1, Geometry geometry2)
  • double distance(Geometry geometry1, Geometry geometry2)
  • GeodeticDistanceResult distanceGeodetic(Point point1, Point point2, LinearUnit distanceUnit, AngularUnit azimuthUnit, GeodeticCurveType curveType)
  • Geometry ellipseGeodesic(GeodesicEllipseParameters parameters)
  • bool equals(Geometry geometry1, Geometry geometry2)
  • Polyline extend(Polyline polyline, Polyline extender, GeometryExtendOptions extendOptions)
  • double fractionAlong(Polyline line, Point point, double tolerance)
  • Geometry generalize(Geometry geometry, double maxDeviation, bool removeDegenerateParts)
  • Geometry intersection(Geometry geometry1, Geometry geometry2)
  • list<Geometry> intersections(Geometry geometry1, Geometry geometry2)
  • bool intersects(Geometry geometry1, Geometry geometry2)
  • bool isSimple(Geometry geometry)
  • Point labelPoint(Polygon polygon)
  • double length(Geometry geometry)
  • double lengthGeodetic(Geometry geometry, LinearUnit lengthUnit, GeodeticCurveType curveType)
  • list<Point> moveGeodetic(list<Point> pointCollection, double distance, LinearUnit distanceUnit, double azimuth, AngularUnit azimuthUnit, GeodeticCurveType curveType)
  • ProximityResult nearestCoordinate(Geometry geometry, Point point)
  • ProximityResult nearestVertex(Geometry geometry, Point point)
  • Geometry normalizeCentralMeridian(Geometry geometry)
  • Geometry offset(Geometry geometry, double distance, GeometryOffsetType offsetType, double bevelRatio, double flattenError)
  • bool overlaps(Geometry geometry1, Geometry geometry2)
  • Geometry project(Geometry geometry, SpatialReference spatialReference)
  • Geometry projectWithDatumTransformation(Geometry geometry, SpatialReference spatialReference, DatumTransformation datumTransformation)
  • bool relate(Geometry geometry1, Geometry geometry2, string relation)
  • Geometry removeM(Geometry geometry)
  • Geometry removeZ(Geometry geometry)
  • Geometry removeZAndM(Geometry geometry)
  • Multipart reshape(Multipart geometry, Polyline reshaper)
  • Geometry sectorGeodesic(GeodesicSectorParameters parameters)
  • Geometry setM(Geometry geometry, double m)
  • Geometry setZ(Geometry geometry, double z)
  • Geometry setZAndM(Geometry geometry, double z, double m)
  • Geometry simplify(Geometry geometry)
  • Geometry symmetricDifference(Geometry geometry1, Geometry geometry2)
  • bool touches(Geometry geometry1, Geometry geometry2)
  • Geometry unionOf(Geometry geometry1, Geometry geometry2)
  • Geometry unionOfGeometries(list<Geometry> geometries)
  • bool within(Geometry geometry1, Geometry geometry2)

Detailed Description

Performs geometric operations such as spatial relationship tests, reprojections, shape manipulations, and topological query and analysis operations. Capabilities include:

  • Create new geometries from others with buffer, clip and unionOf methods.
  • Test spatial relationships between geometries such as intersects and contains.
  • Find the points of nearest distance between geometries.
  • Reproject geometries.
  • Calculate area and length.

Perform planar and geodetic operations

For some operations, there are methods that use geodetic line interpolation rather than planar (Cartesian). Those methods that use geodetic line interpolation are specified in their descriptions. A geodetic curve follows a path between two points on the Earth's surface when the Earth's surface is approximated by a spheroid.

Geodetic and geodesic curves

Not all geodetic curves are geodesic curves. A geodesic curve is one type of geodetic curve: the shortest line between any two points on the Earth's surface on a spheroid (ellipsoid). For a description of all supported geodetic curves, see GeodeticCurveType.

Some methods can operate on different types of geodetic curves. Those methods that only use geodesic curves have the word geodesic in their names.

Spatial relationships

GeometryEngine provides methods that determine the spatial relationship between two geometries. If the spatial relationship exists between the two input geometries, then true is returned. If the spatial relationship does not exist between the two input geometries, then false is returned. The spatial relationship test used by this method is based on the Dimensionally Extended 9 Intersection Model (DE-9IM) developed Clementini, et al.

The spatial relationship methods are:

To use the GeometryEngine, call its methods directly from a JavaScript function.

var result3 = GeometryEngine.nearestVertex(polyline, point);

Method Documentation

double area(Geometry geometry)

Returns the area for the given geometry.

  • geometry - The input geometry.

This is a planar measurement using 2D Cartesian mathematics to compute the area. The geometry must be topologically correct to get its accurate area. Geometries returned by ArcGIS Server services are always topologically correct. If you construct geometries programmatically or if you modify geometries returned by ArcGIS Server, you should first check whether they are simple using isSimple and, if necessary, simplify them using simplify.


double areaGeodetic(Geometry geometry, AreaUnit unit, GeodeticCurveType curveType)

Returns the geodetic area of the input geometry.

  • geometry - The input geometry.
  • unit - The unit of measurement for the output value.
  • curveType - The Enums.GeodeticCurveType to use.

This method will return -1.0 when the input geometry is empty.

See also Enums.GeodeticCurveType.


list<Geometry> autoComplete(list<Geometry> existingBoundaries, list<Geometry> newBoundaries)

Returns polygons that were created by filling the closed gaps between polygons using polygon boundaries (existingBoundaries) and polylines (newBoundaries) as the boundary for the new polygons.

If either existingBoundaries or newBoundaries is empty, returns an empty list. The new polygons are created in the closed empty areas bounded by the edges of the existing polygon boundaries and the new boundary polylines. The newly created polygons do not overlap any polygons in existingBoundaries or polylines in newBoundaries. Only polygons that intersect the input polylines will participate in the operation, so it makes sense to filter the input accordingly. The geometries in existingBoundaries must all have an area, i.e. be polygons or envelopes. The geometries in newBoundaries must all be polylines. The geometries in existingBoundaries and newBoundaries must have the same spatial references.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry boundary(Geometry geometry)

Returns the boundary portion of a geometry.

Returns a geometry representing the boundary of the input geometry.

  • The boundary of a point is an empty geometry. Points have no boundary.
  • The boundary of a polygon is a polyline describing its outer and inner rings.
  • The boundary of a polyline are its end points.

Polygon buffer(Geometry geometry, double distance)

Returns a buffer polygon.

  • geometry - The input geometry.
  • distance - The distance to buffer the input geometry.

Calculates the buffer with simple 2D distances. The distance is expressed in the same unit of measurement as the spatial reference of geometry.


Polygon bufferGeodetic(Geometry geometry, double distance, LinearUnit unit, double maxDeviation, GeodeticCurveType curveType)

Returns a geodetic buffer of a given geometry.

  • geometry - The input geometry.
  • distance - The distance to buffer the input geometry.
  • unit - The unit of measurement for the input distance.
  • maxDeviation - The maximum deviation between points.
  • curveType - The Enums.GeodeticCurveType to use.

See also Enums.GeodeticCurveType.


list<Polygon> bufferGeodeticOfGeometries(list<Geometry> geometries, list<double> distances, LinearUnit unit, double maxDeviation, Enums::GeodeticCurveType curveType, bool unionResult)

Buffers all geometries in the list by the corresponding geodetic distance.

  • geometries - A list of geometries to buffer.
  • distances - The distance to buffer each geometry, expressed as a list of double values.
  • unit - The unit of measurement for the input distance.
  • maxDeviation - The maximum deviation between points.
  • curveType - The Enums.GeodeticCurveType to use.
  • unionResult - Whether to union the resulting geometries. If true a single polygon that buffers all the geometries is returned, else one buffer polygon for each in the given collection is returned.

This QML method was introduced in Esri.ArcGISRuntime 100.1.

See also Enums.GeodeticCurveType.


list<Polygon> bufferOfGeometries(list<Geometry> geometries, list<double> distances, bool unionResult)

Returns a buffer of each geometry in the list by the corresponding distance.

  • geometries - The input geometries.
  • distances - The distance to buffer each geometry, expressed as a list of double values. If the size of the distances array is less than the number of geometries, the last distance value is used for the rest of geometries.
  • unionResult - Whether to union the resulting geometries. If true a single polygon that buffers all the geometries is returned, else one buffer polygon for each in the given collection is returned.

Calculates the buffer with simple 2D distances. The distance is expressed in the same unit of measurement as the spatial reference of geometry.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry clip(Geometry geometry, Envelope envelope)

Returns the portion of a geometry that intersects an envelope.


Geometry combineExtents(Geometry geometry1, Geometry geometry2)

Returns an Envelope representing the minimum extent that encloses both geometry1 and geometry2.

  • geometry1 - The first geometry of the relation.
  • geometry2 - The second geometry of the relation.

The given geometries must be of the same spatial references.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry combineExtentsOfGeometries(list<Geometry> geometries)

Returns an Envelope with the maximum extent of all geometries in the list.

The given geometries must be of the same spatial references.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


bool contains(Geometry geometry1, Geometry geometry2)

Returns whether one geometry contains another geometry.

  • geometry1 The first geometry.
  • geometry2 The second geometry.

The first geometry contains the second if the second lies completely within the first.


Geometry convexHull(Geometry geometry)

Returns the convex hull of a geometry.

A convex hull is a geometry whose vertices are the smallest set of vertices needed to surround the input geometry. One way to visualize this is as a rubber band stretched around a polygon that has some concave sides.


list<Geometry> convexHullOfGeometries(list<Geometry> geometries)

Returns the convex hull of each of the geometries in the list.

If unionResult is true, a single geometry that encloses all the geometries is returned, otherwise one enclosing geometry for each in the given collection is returned.

A convex hull is a geometry whose vertices are the smallest set of vertices needed to surround the input geometry. One way to visualize this is as a rubber band stretched around a polygon that has some concave sides.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Point createPointAlong(Polyline polyline, double distance)

Returns the point at the given distance along the line, or null if an error ocurred.

If distance is less than or equal to zero, the point returned is coincident with the start of the line. If distance is greater than or equal to the line's length, the point returned is coincident with the end of the line. If the line has multiple parts, and the distance falls exactly on a boundary between two parts, the returned point will be coincident with either the end of one part or the start of the next, which is indeterminate.

  • polyline - The polyline from which point is created.
  • distance - The distance along the line of the point to return, in the line's units.

This QML method was introduced in Esri.ArcGISRuntime 100.2.


bool crosses(Geometry geometry1, Geometry geometry2)

Returns whether geometry1 and geometry2 cross.

Geometries cross when they have some but not all of their interiors in common, and when the geometry representing their intersection has a dimension that is less that at least one of the input geometries.

An example of this is when a polyline's interior (the portion between the end points) intersects a polygon's interior (the part within the boundary ring) but some part of the polyline's interior is outside the polygon. Therefore, some of the interior of the polyline is not in common with the polygon's interior, and the intersection geometry is a polyline with a dimension 1. A polygon's dimension is 2.


list<Geometry> cut(Geometry geometry, Polyline cutter)

Returns a list of cut geometries.

  • geometry - The input geometry.
  • cutter - The polyline that will be used to divide the input geometry into pieces where it crosses the cutter.

The cutter and geometry's spatial references must match. If there were no cuts then an empty list will be returned.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry densify(Geometry geometry, double maxSegmentLength)

Returns a geometry densified on a 2D plane.

  • geometry - The input geometry to densify.
  • maxSegmentLength -The maximum distance between vertices after densification.

Returns the geometry densified by adding vertices between existing vertices. Returns the original geometry if the input geometry is not a Polygon or Polyline or if maxSegmentLength < 0.


Geometry densifyGeodetic(Geometry geometry, double maxSegmentLength, LinearUnit lengthUnit, GeodeticCurveType curveType)

Returns a geometry densified using a geodetic curve.

  • geometry - The input geometry.
  • maxSegmentLength - The maximum distance between points in the densified geometry.
  • lengthUnit - The unit of measurement for maxSegmentLength
  • curveType - The Enums.GeodeticCurveType to use.

See also Enums.GeodeticCurveType.


Geometry difference(Geometry geometry1, Geometry geometry2)

Returns the difference of two geometries.

  • geometry1 The first geometry.
  • geometry2 The second geometry.

The output geometry is the part of geometry1 that does not intersect geometry2. The dimension of geometry2 must be equal to or greater than the dimension of geometry1.


bool disjoint(Geometry geometry1, Geometry geometry2)

Returns whether two geometries are disjoint.

Geometries are disjoint if their boundaries, interiors, or any combination thereof do not intersect.

  • geometry1 The first geometry.
  • geometry2 The second geometry.

Returns true if the geometries are disjoint.


double distance(Geometry geometry1, Geometry geometry2)

Returns the 2D planar distance between two geometries.

  • geometry1 The first geometry.
  • geometry2 The second geometry.

The distance between geometries is calculated as the simple straight-line distance using the coordinate system in the input geometry's spatial reference.


GeodeticDistanceResult distanceGeodetic(Point point1, Point point2, LinearUnit distanceUnit, AngularUnit azimuthUnit, GeodeticCurveType curveType)

Returns the geodetic distance between two points, and the azimuths from one to another.

  • point1 - A point object.
  • point2 - Another point object.
  • distanceUnit - The LinearUnit of measurement for the returned results.
  • azimuthUnit - The AngularUnit of measurement for the returned results.
  • curveType - The Enums.GeodeticCurveType to use.

See also Enums.GeodeticCurveType.


Geometry ellipseGeodesic(GeodesicEllipseParameters parameters)

Returns a geodesic ellipse centered on a specific point.

This method can return an ellipse as a Polygon, Polyline, or Multipoint geometry.

A geodesic ellipse is defined by a center point, the lengths of its semi-major and semi-minor axes, and the angular direction of its semi-major axis.

This method returns an empty geometry when:

  • parameters is empty.
  • parameters.center is empty.
  • parameters.center does not contain a valid spatial reference.
  • parameters.geometryType is Envelope or Point.
  • Either semi-axis length is less than zero.

See also GeodesicEllipseParameters.


bool equals(Geometry geometry1, Geometry geometry2)

Returns whether two geometries are equal.

Returns true if geometry1 is equal to geometry2.


Polyline extend(Polyline polyline, Polyline extender, GeometryExtendOptions extendOptions)

Returns a polyline which is a result of extending a polyline with an extender using the type of extension specified with extendOptions flags.

The output polyline will have the first and last segment of each path extended to the extender if the segments can be interpolated to intersect the extender. In the case that the segments can be extended to multiple segments of the extender, the shortest extension is chosen. Only end points for paths that are not shared by the end points of other paths will be extended. If the polyline cannot be extended by the input extender, then a empty polyline will be returned.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


double fractionAlong(Polyline line, Point point, double tolerance)

Returns The length along the line nearest the input point, expressed as the fraction of the line's length between 0.0 and 1.0, or NAN if the point is outside the tolerance.

Finds the location on the line nearest the input point, expressed as the fraction along the line's total geodesic length, if the point is within the specified distance from the closest location on the line. The line and point must have the same spatial references.

  • line - The line to locate the point's distance along its length.
  • point - The point to locate.
  • tolerance - The max distance point is allowed to be from the closest location on the line in the units of the SpatialReference, or -1 to ignore the distance and always return the fraction of the closest location on the line.

This QML method was introduced in Esri.ArcGISRuntime 100.6.


Geometry generalize(Geometry geometry, double maxDeviation, bool removeDegenerateParts)

Returns a geometry generalized by removing some vertices.

The Douglas-Peucker algorithm (with enhancements) is used to generalize the geometry. The algorithm simplifies complex lines by reducing the number of points used to represent them.

  • geometry - The input geometry.
  • maxDeviation - The maximum distance that the generalized geometry can deviate from the original one, specified in the units of the input geometry's spatial reference.
  • removeDegenerateParts - If true, degenerate parts of the generalized geometry that are undesired for drawing will be removed.

Geometry intersection(Geometry geometry1, Geometry geometry2)

Returns the intersection of two geometries.

  • geometry1 The first geometry.
  • geometry2 The second geometry.

Returns a geometry that represents the intersection of the two input geometries.


list<Geometry> intersections(Geometry geometry1, Geometry geometry2)

Returns the intersection of two geometries.

  • geometry1 - The first geometry.
  • geometry2 - The second geometry.

Returns a list of geometry objects that represent the intersection of geometry1 and geometry2.

The returned list contains one geometry of each dimension for which there are intersections. For example, if both inputs are polylines, the collection will contain at most two geometries: the first a multipoint containing the points at which the lines cross, and the second a polyline containing the lines of overlap. If a crossing point lies within a line of overlap, only the line of overlap is present -- the result set is not self-intersecting. If there are no crossing points or there are no lines of overlap, the respective geometry will not be present in the returned list.

If the input geometries do not intersect, the resulting list will be empty.

The grid below shows, for each combination of pairs of input geometry types, the types of geometry that will be contained within the returned list if there are intersections of that type.

Input typePoint/MultipointPolylinePolygon/Envelope
Point/MultipointMultipointMultipointMultipoint
PolylineMultipointMultipoint, PolylineMultipoint, Polyline
Polygon/EnvelopeMultipointMultipoint, PolylineMultipoint, Polyline, Polygon

The geometries in the returned list are sorted by ascending dimensionality, e.g. multipoint (dimension 0) then polyline (dimension 1) then polygon (dimension 2) for the intersection of two geometries with area that have intersections of those types.


bool intersects(Geometry geometry1, Geometry geometry2)

Returns whether two geometries intersect.

  • geometry1 - The first geometry.
  • geometry2 - The second geometry.

Returns true if geometry1 intersects geometry2.


bool isSimple(Geometry geometry)

Returns whether the input geometry is simple.

You can simplify geometries by calling simplify when required. This property allows you to check whether you need to call simplify, which creates a copy of the original Geometry.

When the polyline has z values, the degenerate segments are those that are shorter than the tolerance in x,y plane, and the change in z value along the segment is less than or equal to the z tolerance.

For Polygons, exterior rings are clockwise, and interior rings (holes) are counterclockwise. Rings can touch other rings in finite number of points. Rings can be self-tangent in finite number of points. Vertices are either exactly coincident, or further than the tolerance from each other. If a vertex is not equal to any boundary point of a segment, it must be further than tolerance from any segment. No segment length is zero or less than tolerance. Each path contains at least three non-equal vertices. No empty paths allowed. Order of rings does not matter.

Point geometry is always simple.

For Multipoints, there can be no point with exactly equal x and y values. The tolerance is not considered in this comparison.

Note: Tolerance for x, y, z, and m values is provided in or calculated from the spatial reference.


Point labelPoint(Polygon polygon)

Returns the label point for a polygon.

A label point lies in the interior of the polygon near the center of gravity.


double length(Geometry geometry)

Returns the length of the given geometry.

  • geometry - The input geometry.

Returns the length using the same unit of measurement as the geometry's spatial reference.


double lengthGeodetic(Geometry geometry, LinearUnit lengthUnit, GeodeticCurveType curveType)

Returns the geodetic length of a geometry.

  • geometry - The input geometry.
  • lengthUnit - The LinearUnit of measurement for the returned results.
  • curveType - The Enums.GeodeticCurveType to use.

See also Enums.GeodeticCurveType.


list<Point> moveGeodetic(list<Point> pointCollection, double distance, LinearUnit distanceUnit, double azimuth, AngularUnit azimuthUnit, GeodeticCurveType curveType)

Moves all points in the point collection in a specified direction by a geodetic distance.

  • pointCollection- A list of point objects.
  • distance - The distance to move the points.
  • distanceUnit - The LinearUnit of measurement for distance.
  • azimuth - The azimuth angle of the direction for the points.
  • azimuthUnit - The AngularUnit of measurement for angle.
  • curveType - The Enums.GeodeticCurveType to use.

See also Enums.GeodeticCurveType.


ProximityResult nearestCoordinate(Geometry geometry, Point point)

Returns the coordinate point on a geometry nearest to a given point.

Returns a ProximityResult that identifies the nearest point along a Polyline or along the boundary of a Polygon. Distance is measured in the units of the spatial reference of the input geometry.

nearestCoordinate considers all points along all segments of all parts of the geometry, whereas nearestVertex considers only points that are a start point or end point of a segment of the geometry.


ProximityResult nearestVertex(Geometry geometry, Point point)

Returns the vertex on a geometry nearest to a given point.

Returns a ProximityResult that identifies the nearest vertex along a Polyline or along the boundary of a Polygon. Distance is measured in the units of the spatial reference of the input geometry.

nearestCoordinate considers all points along all segments of all parts of the geometry, whereas nearestVertex considers only points that are a start point or end point of a segment of the geometry.


Geometry normalizeCentralMeridian(Geometry geometry)

Returns a geometry folded into the 360-degree range of its associated spatial reference.

  • geometry - The input geometry to fold.

Folding is used when a geometry intersects the minimum or maximum meridian of the spatial reference, or when geometry is completely outside of the meridian range.

Use this method when editing geometries on a map that has wraparound enabled. In these cases, it is imperative to fold geometries, as the original coordinates correspond to the frame of the map. For example, if you add new features to a map with wraparound enabled, and then you pan west across the dateline several times, the coordinates of the newly added features would be incorrectly outside of the spatial reference's maximum extent until they were folded using this static method.

The geometry's spatial reference must be a pannable projected coordinate system (PCS) or a geographic coordinate system (GCS). A pannable PCS is a rectangular PCS where the x-coordinate range corresponds to a 360-degree range on the defining GCS. A GCS is always pannable.

Folding does not preserve geodetic area or length. Folding does not preserve the perimeter of a polygon.

Returns the folded geometry. The resulting geometry will be completely inside the coordinate system extent. If geometry or its spatial reference are empty, an empty geometry is returned. If the geometry's spatial reference is not pannable, the input geometry is returned. If the geometry is a non-empty envelope, this method returns a polygon.


Geometry offset(Geometry geometry, double distance, GeometryOffsetType offsetType, double bevelRatio, double flattenError)

Returns an offset version of the input geometry.

  • geometry - The input geometry.
  • distance - The offset distance for the new geometry.
  • offsetType - The Enums.GeometryOffsetType to produce in the resulting geometry.
  • bevelRatio - The ratio used to produce a bevel join instead of a miter join (used only when the offset type is Miter).
  • flattenError - The maximum distance of the resulting segments compared to the true circular arc (used only when offsetType is GeometryOffsetTypeRounded).

The offset operation creates a geometry that is a constant distance from the input geometry. This is similar to buffering, but produces a one sided result instead of one that surrounds the input geometry. If distance > 0 then the offset geometry is constructed to the right of the input geometry, otherwise it is constructed to the left.

See also Enums.GeometryOffsetType.


bool overlaps(Geometry geometry1, Geometry geometry2)

Returns whether two geometries overlap.

  • geometry1 - The first geometry.
  • geometry2 - The second geometry.

Returns true when the two geometries have the same dimension and when their intersection result is a geometry of the same dimension. If the intersection result is a geometry with a lesser dimension than the input geometries, then method returns false.

For example: two input polygons must return a polygon to overlap. If two polygons intersect each other at exactly one point then no overlap has occurred because the intersection result is a point whose dimension is zero.


Geometry project(Geometry geometry, SpatialReference spatialReference)

Projects the given geometry into a new spatial reference.

  • geometry - The input geometry.
  • spatialReference - The output spatial reference.

Geometry projectWithDatumTransformation(Geometry geometry, SpatialReference spatialReference, DatumTransformation datumTransformation)

Projects the given geometry into a new spatial reference using given datum transformation.

  • geometry - The input geometry.
  • spatialReference - The output spatial reference.
  • datumTransformation - The datum transformation.

This QML method was introduced in Esri.ArcGISRuntime 100.2.


bool relate(Geometry geometry1, Geometry geometry2, string relation)

Returns whether two geometries have a specific spatial relationship.

  • geometry1 - The first geometry of the relation.
  • geometry2 - The second geometry of the relation.
  • relation - The DE-9IM string code describing the relationship to test.

The Dimensionally Extended 9 Intersection Model (DE-9IM) matrix relation (encoded as a string) to test against the relationship of the two geometries. This string contains the test result of each intersection represented in the DE-9IM matrix. Each result is one character of the string and may be represented as either a number (maximum dimension returned: '0','1','2'), a Boolean value ('T' or 'F'), or a mask character (for ignoring results: '*').

For example, each of the following DE-9IM string codes are valid for testing whether a polygon geometry completely contains a line geometry: "TTTFFTFFT" (Boolean), "T*****FF*" (ignore irrelevant intersections), or "102FF*FF*" (dimension form). Each returns the same result.

See this article and this help page for more information about the DE-9IM model and how string codes are constructed.


Geometry removeM(Geometry geometry)

Returns a copy of the given geometry with its M values removed.

  • geometry - The input geometry.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry removeZ(Geometry geometry)

Returns a copy of the given geometry with its Z coordinate removed.

  • geometry - The input geometry.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry removeZAndM(Geometry geometry)

Returns a copy of the given geometry with its Z coordinate and M values removed.

  • geometry - The input geometry.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Multipart reshape(Multipart geometry, Polyline reshaper)

Returns a polygon or polyline reshaped with a single path polyline.

  • geometry - The polygon or polyline to be reshaped.
  • reshaper - The single path polyline reshaper.

For polygons, only individual paths can be reshaped. However, polylines can be reshaped across paths. If the geometry cannot be reshaped by the input reshaper, then an empty polygon or polyline is returned.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry sectorGeodesic(GeodesicSectorParameters parameters)

Returns a geodesic sector defined by a geodesic arc and two radii.

This method can produce a sector as a polygon, polyline or multipoint geometry.

A geodesic sector is defined by a geodesic elliptical arc and two radii extending from the center point of the arc to the points where they each intersect the arc.

The arc is a portion of an ellipse. The ellipse is defined by a center point, the lengths of its semi-major and semi-minor axes, and the direction of its semi-major axis.

The first radius of the sector is defined by the start direction angle relative to the direction of the semi-major axis. The second radius is the sum of the start direction and the sector angle.

This method will return an empty geometry when:

  • parameters is empty.
  • parameters.center is empty or is outside the horizon of the spatial reference.
  • parameters.center does not contain a valid spatial reference or is a local spatial reference.
  • parameters.geometryType is Envelope or Point.
  • Either semi-axis length is less than zero.

See also GeodesicSectorParameters.


Geometry setM(Geometry geometry, double m)

Returns a copy of a geometry with the supplied M value.

  • geometry - The input geometry.
  • m - The M value to apply to the returned geometry.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry setZ(Geometry geometry, double z)

Returns a copy of a geometry with the supplied Z coordinate.

  • geometry - The input geometry.
  • z - The Z coordinate to apply to the returned geometry.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry setZAndM(Geometry geometry, double z, double m)

Returns a copy of a geometry with the supplied Z coordinate and M value.

  • geometry - The input geometry.
  • z - The Z coordinate to apply to the returned geometry.
  • m - The M value to apply to the returned geometry.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


Geometry simplify(Geometry geometry)

Simplifies the given geometry to make it topologically consistent according to its geometry type.

  • geometry - The input geometry.

Returns a simplified copy of the input geometry.


Geometry symmetricDifference(Geometry geometry1, Geometry geometry2)

Returns the symmetric difference of two geometries.

  • geometry1 - The first geometry of the relation.
  • geometry2 - The second geometry of the relation.

The symmetric difference includes the parts which are in either of the geometries, but not in both.


bool touches(Geometry geometry1, Geometry geometry2)

Returns whether two geometries touch on their borders.

  • geometry1 - The first geometry.
  • geometry2 - The second geometry.

Returns true if the border of the first geometry touches the border of the second.


Geometry unionOf(Geometry geometry1, Geometry geometry2)

Returns the union of two geometries.

  • geometry1 - The first geometry.
  • geometry2 - The second geometry.

Both input geometries must be of the same geometry type and share the same spatial reference.


Geometry unionOfGeometries(list<Geometry> geometries)

Returns the union of the list of geometries.

All input geometries must be of the same geometry type and share the same spatial reference.

This QML method was introduced in Esri.ArcGISRuntime 100.1.


bool within(Geometry geometry1, Geometry geometry2)

Returns whether one geometry is completely within another geometry.

  • geometry1 - The first geometry.
  • geometry2 - The second geometry.

Returns true if geometry1 lies completely within geometry2.



Feedback on this topic?